John Deere 9550SH Combine Parts
Find parts for your John Deere 9550SH Combine. We stock OEM and quality aftermarket replacements ready to ship.
The John Deere 9550SH combine, manufactured from approximately 1999-2002, provided farmers with a robust harvesting solution. Powered by a John Deere engine producing around 250 horsepower, it offered header widths up to 30 feet. This combine utilized a specialty header rotary separator, which contributed to its popularity for its improved grain quality and reduced losses compared to conventional combines of the time.
About the 9550SH
The John Deere 9550SH was introduced in the late 1990s as part of John Deere's SH (SideHill) combine series, designed to excel in challenging terrain. It was produced from approximately 1999 to 2002. The 9550SH is powered by a John Deere 6.8L 6-cylinder diesel engine, producing around 250 horsepower. The separator is a specialty header rotary design (single rotor), which differs significantly from the standard conventional cylinder/concave threshing system. It features a 220-bushel grain tank and an unloading auger with a rate of approximately 2.1 bushels per second (126 bu/min). Available header widths ranged from 20 to 30 feet, accommodating various field sizes. Chopper and spreader options were available to manage residue. The cab offered improved operator comfort and controls for increased productivity. The 9550SH proved capable in harvesting a variety of crops, including wheat, soybeans, and corn, especially where hillside operation was a need.
9550SH Specifications
| Engine | John Deere 6.8L 250 HP Diesel |
|---|---|
| Separator Type | Specialty Header Rotary - Single Rotor |
| Grain Tank | 220 bushels |
| Unloading Rate | 126 bu/min |
| Header Widths | 20-30 ft |
| Fuel Capacity | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | 1999-2002 |
9550SH Maintenance Tips
- Concave Adjustment: Regularly check and adjust concave clearance based on crop type and condition to optimize threshing performance and minimize grain damage.
- Belt and Chain Tension: Inspect and maintain proper tension on all belts and chains to ensure smooth operation and prevent slippage or breakage.
- Sieve and Chaffer Cleaning: Clean sieves and chaffers frequently to remove debris and ensure proper airflow, which is crucial for efficient grain cleaning.
- Bearing Greasing: Regularly grease all bearings according to the manufacturer's recommendations to prevent premature wear and failure. Pay special attention to bearings in high-stress areas like the header and separator.
9550SH History & Background
The John Deere 9550SH was an important model as part of the SH series, catering to farmers needing hillside performance. It represented a step towards more efficient harvesting, utilizing a specialty header rotary design to improve threshing and separation compared to older, conventional models. While not a complete redesign, the SH series improved on earlier combines of John Deere.
Frequently Asked Questions
Which main bearing is recommended for the John Deere 9550SH?
For the John Deere 9550SH, a standard replacement main bearing is the RE529319 - Main Bearing, Std.. This component is essential for engine crankshaft support.
What lower sprocket is used for the clean grain elevator on a 9550SH?
The lower sprocket for the clean grain elevator system on a 9550SH is the H133143 - Sprocket, Clean Grain Elevator, Lower. It plays a critical role in maintaining efficient grain flow.
Which concave insert is suitable for the John Deere 9550SH's separator?
The AH206756 - Concave Insert - C/W Spring, Pin, Roll Pin & Washer is a suitable replacement part for the separator system in the John Deere 9550SH combine.
What are essential replacement and wear parts for the John Deere 9550SH?
Essential replacement and wear parts for the 9550SH combine include the H215004 - Blade, Straw Chopper, Stationary, H132057 - Tooth, Cylinder Spike; w/ Hardware, and VPK1551 - Hydraulic Filter. Other frequently needed items are the AH125975 - Bearing, Cleaning Shoe Shaft, RE500186 - Filter, Fuel/Water Separator, and H144667 - Paddle, Elevator Chain.

RE64509 - High Compression Piston Piston Liner Kit
SKU: RE64509
60 in stock

RE520036 - Rear Crankshaft Seal
SKU: RE520036
236 in stock

RE519115 - Valve; Intake/Exhaust Seal
SKU: RE519115
290 in stock

T20129 - Valve Stem Cap
SKU: T20129
155 in stock

T20077 - Valve Keeper
SKU: T20077
1248 in stock

T20006 - Exhaust Manifold Gasket
SKU: T20006
834 in stock

T122075 - Oil Cooler (2 PK) O-Ring
SKU: T122075
43 in stock

RE69243 - Engine Oil Dipstick
SKU: RE69243
217 in stock

RE65912 - Thrust (.010") Bearing
SKU: RE65912
73 in stock

RE65911 - Main (.010") Bearing
SKU: RE65911
721 in stock

RE65909 - Connecting Rod (.010") Bearing
SKU: RE65909
79 in stock

RE65908 - Connecting Rod (Std) Bearing
SKU: RE65908
7182 in stock

RE65265 - Hand Primer
SKU: RE65265
176 in stock

RE65168 - Thrust (Std) Bearing
SKU: RE65168
627 in stock

RE65165 - Main (Std) Bearing
SKU: RE65165
6921 in stock

RE62777 - Exhaust Manifold; Outer (2/Pack) Gasket
SKU: RE62777
896 in stock

RE61812 - Air Intake Temperature Sensor
SKU: RE61812
138 in stock

RE61253 - Std. Thrust Washer Set
SKU: RE61253
10 in stock

RE59810 - Front Crankshaft Seal
SKU: RE59810
61 in stock

RE59298 - 9 Plate Engine Oil Cooler
SKU: RE59298
7 in stock

RE57604 - Dual; Heavy Duty Torsional Damper
SKU: RE57604
Out of stock

RE57054 - Camshaft W/ Tappets
SKU: RE57054
30 in stock

RE557891 - Exhaust; 30° Valve
SKU: RE557891
818 in stock

RE557890 - Intake; 30° Valve
SKU: RE557890
1146 in stock








