Gleaner K2 Combine Parts
Browse Gleaner K2 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The Gleaner K2 combine, produced from the late 1960s through the 1970s, was a popular choice for farmers seeking a reliable and efficient grain harvesting solution. Powered by an engine delivering approximately 115 horsepower, the K2 was available with header widths up to 20 feet, allowing for effective harvesting across various field sizes. Its conventional separator design and robust construction made it a workhorse in the fields.
About the K2
The Gleaner K2 combine, manufactured from the late 1960s to the late 1970s, built upon the success of the earlier Gleaner models and became a mainstay on many farms. It typically featured a six-cylinder engine, most commonly a [Engine Brand] diesel engine producing around 115 horsepower with a displacement of approximately [Displacement] cubic inches. The K2 employed a conventional threshing system with a [Cylinder Width] inch wide cylinder and a large concave area for thorough grain separation. Grain tank capacity was approximately 150 bushels, with an unloading auger capable of unloading at a rate of about 30 bushels per minute. Available header widths ranged from 13 to 20 feet. Chopper and spreader options were available to manage crop residue. Cab features were relatively basic for the time, offering some operator comfort. The Gleaner K2 proved to be a versatile combine, effective at harvesting wheat, soybeans, and corn.
K2 Specifications
| Engine | [Engine Brand, e.g., Allis-Chalmers] 115 HP [Displacement, e.g., 426] CID Diesel |
|---|---|
| Separator Type | Conventional - [Cylinder Width, e.g., 40] inch wide cylinder |
| Grain Tank | 150 bushels |
| Unloading Rate | 30 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | [Fuel Capacity, e.g., 50] gallons |
| Weight | [Weight, e.g., 15,000] lbs |
| Years Produced | Late 1960s - Late 1970s |
K2 Maintenance Tips
- Regularly inspect and adjust the concave clearance to optimize threshing performance and minimize grain damage.
- Check and maintain proper tension on all belts and chains to ensure smooth operation and prevent premature wear.
- Clean the sieves and chaffers frequently to maintain proper airflow and prevent grain loss over the back.
- Grease all bearings and moving parts according to the manufacturer's recommendations to extend component life and reduce downtime.
K2 History & Background
The Gleaner K2 was introduced as an upgrade to previous Gleaner models, offering improved performance and capacity. It continued Gleaner's tradition of transverse-flow combines. The K2 was a popular choice for farmers during its production run due to its reliability and effectiveness.
Frequently Asked Questions
Which water pump fits the Gleaner K2?
The recommended replacement water pump for the Gleaner K2 is 74009278 - Pump, Water.
What straw chopper knife kit is recommended for the Gleaner K2?
For the Gleaner K2, a suitable straw chopper knife kit is 71310275 - Straw Chopper Knife Kit.
Which finger guide is compatible with the Gleaner K2?
A poly finger guide compatible with the Gleaner K2 is 71146965 - Finger Guide (Poly).
What are common replacement parts for the Gleaner K2?
Common replacement parts for the Gleaner K2 include a LF682 - Filter, Lube, Spin-On (QTY 12), a 71174897 - Stationary Knife Kit, 904-500 - (50) 7/32 x 5/8" Bolt & Nut, a 79034573 - Belt, Traction Drive, 71129508 - Steel Reel Finger (RH), and 481088 - Steel Reel Finger (LH).

71131341 - Main Drive Clutch Input Shaft
SKU: 71131341
46 in stock

79034573 - Traction Drive Belt
SKU: 79034573
32 in stock

FTR362-I - Bearing; 3 Bolt Triangular Flange Half
SKU: FTR362-I
753 in stock

72097583 - Bulb - 12V 21W (1156)
SKU: 72097583
115 in stock

621235M1 - Bulb - 12V 21W (1156)
SKU: 621235M1
115 in stock

901-025 - Sickle Head
SKU: 901-025
8 in stock

71131910 - PTO Output Shaft Bearing
SKU: 71131910
89 in stock

W7761220 - Blower Switch
SKU: W7761220
423 in stock

72274512 - Expansion Valve (block type)
SKU: 72274512
83 in stock

71380935 - Blower Switch
SKU: 71380935
423 in stock

71369764 - Expansion Valve (block type)
SKU: 71369764
83 in stock

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor
SKU: 71336550
18 in stock

71307202 - Expansion Valve (block type)
SKU: 71307202
83 in stock

71195109 - Switch Blower
SKU: 71195109
423 in stock

71193543 - Receiver Drier
SKU: 71193543
41 in stock

71190643 - High Pressure Switch
SKU: 71190643
7 in stock

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor (12V
SKU: 71188287
21 in stock

71182664 - Clutch - York/Tecumseh Style (2 groove 7" pulley)
SKU: 71182664
66 in stock

71162474 - Thermostatic Switch
SKU: 71162474
73 in stock

70577454 - Switch Blower - 3 speed
SKU: 70577454
423 in stock

70257681 - CW rotation) 5/16" X 1 3/8" shaft Blower Motor - Condenser (12V
SKU: 70257681
21 in stock

70257336 - CCW rotation) 5/16" X 2 1/2" shaft Blower Motor (12V
SKU: 70257336
7 in stock

3383321M2 - Receiver Drier
SKU: 3383321M2
42 in stock

3383321M1 - Receiver Drier
SKU: 3383321M1
41 in stock








