Gleaner L2 Combine Parts
Replacement parts for the Gleaner L2 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Gleaner L2 combine, produced from 1972 to 1981, was known for its innovative sidehill self-leveling design and exceptional grain quality. Powered by a robust engine delivering around 165 HP, the L2 could handle a variety of header widths, typically ranging from 13 to 24 feet. Its conventional cylinder and walker separation system made it a favorite for farmers seeking a reliable and efficient harvesting solution.
About the L2
The Gleaner L2 combine was introduced in 1972, representing an evolution of the Gleaner's commitment to efficient harvesting. Production continued through 1981. This model was typically powered by an Allis-Chalmers 426 cubic inch displacement diesel engine, producing approximately 165 horsepower. The L2 utilized a conventional threshing system with a 50-inch wide cylinder and four-walker separation system. Its grain tank held around 160 bushels, and the unloading auger had a discharge rate of approximately 40 bushels per minute. Available header widths ranged from 13 to 24 feet. Chopper and spreader options varied, allowing operators to customize residue management. The cab offered basic operator comfort and controls for adjusting threshing and cleaning settings. The Gleaner L2 excelled in harvesting a variety of grains, including wheat, soybeans, and corn, due to its gentle threshing action which minimized grain damage.
L2 Specifications
| Engine | Allis-Chalmers 426 CID 165 HP Diesel |
|---|---|
| Separator Type | Conventional - 50" Cylinder, 4 Walkers |
| Grain Tank | 160 bushels |
| Unloading Rate | 40 bu/min |
| Header Widths | 13-24 ft |
| Fuel Capacity | 75 gallons |
| Weight | 18,000 lbs (approximate) |
| Years Produced | 1972-1981 |
L2 Maintenance Tips
- Concave Adjustment: Regularly check and adjust concave clearance to ensure proper threshing without cracking grain. Refer to the operator's manual for recommended settings based on crop type.
- Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Loose belts can slip, reducing efficiency, while worn chains can break. Replace worn components promptly.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer regularly to remove debris and ensure proper airflow for efficient grain separation. This prevents grain loss and improves harvest quality.
- Bearing Greasing: Lubricate all bearings according to the manufacturer's recommendations. Proper lubrication extends bearing life and prevents costly repairs.
L2 History & Background
Introduced in 1972, the Gleaner L2 built upon the success of previous L series models, offering increased power and capacity. It represented a significant step forward in combine technology for Gleaner, known for its transverse-mounted engine and natural flow design. The L2 helped solidify Gleaner's reputation for producing combines that minimized grain damage and maximized harvesting efficiency.
Frequently Asked Questions
Which water pump fits the Gleaner L2?
The recommended replacement water pump for the Gleaner L2 is 74036573 - Pump, Water.
What raddle sprocket is used in the Gleaner L2's separator?
For the Gleaner L2's thresher and separator, the correct raddle sprocket is 71311147 - Sprocket, Raddle (Thresher & Seperator).
Which straw chopper knife kit is compatible with the Gleaner L2?
The 71310275 - Straw Chopper Knife Kit is designed for use with the Gleaner L2 combine.
What are some common replacement parts for the Gleaner L2 combine?
For routine maintenance and wear, common replacement parts include the 71311275 - Belt, Pick-up Drum & Draper, 71146965 - Finger Guide (Poly), 195207M1 - Bearing, Trans Release, 71174897 - Stationary Knife Kit, and 71194972 - Bushing, Shoe.

71184195 - Wheel Brake Disc
SKU: 71184195
20 in stock

71154856 - Hydro Shaft For DynaPower Brand Hydro
SKU: 71154856
8 in stock

79034572 - Thresher Countershaft Belt
SKU: 79034572
5 in stock

79034570 - Pivot (RH) Belt
SKU: 79034570
Out of stock

71322828 - Flex Cutter Bar Belt
SKU: 71322828
20 in stock

71311275 - Pick-up Drum & Draper Belt
SKU: 71311275
163 in stock

71305994 - Floating Cutter Bar Belt
SKU: 71305994
32 in stock

71193749 - AC Compressor Belt
SKU: 71193749
41 in stock

FTR362-I - Bearing; 3 Bolt Triangular Flange Half
SKU: FTR362-I
753 in stock

72097583 - Bulb - 12V 21W (1156)
SKU: 72097583
115 in stock

621235M1 - Bulb - 12V 21W (1156)
SKU: 621235M1
115 in stock

901-025 - Sickle Head
SKU: 901-025
8 in stock

71131910 - PTO Output Shaft Bearing
SKU: 71131910
89 in stock

W7761220 - Blower Switch
SKU: W7761220
423 in stock

72274512 - Expansion Valve (block type)
SKU: 72274512
83 in stock

71380935 - Blower Switch
SKU: 71380935
423 in stock

71369764 - Expansion Valve (block type)
SKU: 71369764
83 in stock

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor
SKU: 71336550
18 in stock

71307202 - Expansion Valve (block type)
SKU: 71307202
83 in stock

71195109 - Switch Blower
SKU: 71195109
423 in stock

71193543 - Receiver Drier
SKU: 71193543
41 in stock

71190643 - High Pressure Switch
SKU: 71190643
7 in stock

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor (12V
SKU: 71188287
21 in stock

71182664 - Clutch - York/Tecumseh Style (2 groove 7" pulley)
SKU: 71182664
66 in stock








