Gleaner R70 Combine Parts
Gleaner R70 Combine parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The Gleaner R70 combine, manufactured from 1986 to 1992, offered farmers a powerful and reliable harvesting solution. Powered by a robust diesel engine producing approximately 270 horsepower, it could handle a variety of header widths. Its efficient rotary separator design contributed to its popularity, providing excellent grain quality and minimal losses, making it a favorite for harvesting crops like wheat, corn, and soybeans.
About the R70
The Gleaner R70 was introduced in 1986 and continued production until 1992, building upon the legacy of the Gleaner brand. This combine featured a Cummins L10 270 horsepower diesel engine with a displacement of 611 cubic inches. It employed a transverse rotary separator design, known for its efficient threshing and separation capabilities. The grain tank held approximately 300 bushels, and the unloading auger could discharge grain at a rate of around 100 bushels per minute. Available header widths ranged from 15 to 30 feet, accommodating various field sizes and crop types. Options included straw choppers and spreaders for residue management. The R70's cab offered improved operator comfort and visibility compared to earlier models. It excelled at harvesting a wide range of crops, including wheat, corn, soybeans, and other small grains, offering farmers a versatile and productive harvesting solution.
R70 Specifications
| Engine | Cummins L10 270 HP Diesel |
|---|---|
| Separator Type | Transverse Rotary - 30.5 inch rotor diameter |
| Grain Tank | 300 bushels |
| Unloading Rate | 100 bu/min |
| Header Widths | 15-30 ft |
| Fuel Capacity | 150 gallons |
| Weight | 25,000 lbs (approximate) |
| Years Produced | 1986-1992 |
R70 Maintenance Tips
- Concave Adjustment: Regularly check and adjust the concave clearance to optimize threshing performance and minimize grain damage. Refer to the operator's manual for recommended settings based on the crop being harvested.
- Belt and Chain Tension: Inspect and adjust belt and chain tension regularly to prevent slippage and ensure proper operation of all components. Loose belts or chains can lead to inefficient harvesting and premature wear.
- Sieve and Chaffer Cleaning: Keep the sieves and chaffer clean and free of debris to maintain optimal cleaning performance and prevent grain loss. Regular cleaning will improve grain quality and reduce the risk of plugging.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to ensure smooth operation and extend the life of the bearings. Neglecting greasing can lead to bearing failure and costly repairs.
R70 History & Background
The Gleaner R70 was launched in 1986 as part of the R series, marking a significant step forward in rotary combine technology for Gleaner. It improved upon previous models with enhanced engine power and harvesting efficiency. It holds a notable place in combine history for its reliable rotary separator design and its contribution to improving harvesting productivity.
Frequently Asked Questions
Which starter motor fits the Gleaner R70?
For the Gleaner R70, the recommended replacement starter is the 71338509 - Starter, Delco.
What unloading auger assembly is available for the Gleaner R70?
The 71374184 - Auger, Unloading is a suitable replacement for the Gleaner R70 model.
Which cylinder bars are used in the Gleaner R70 processor?
The 71371511 - Cylinder Bar, P3 Processor. Forward 1/2" Spaced (Set Of 2) is a direct replacement for the R70's processor.
What are common parts needed for the Gleaner R70?
To maintain optimal performance of your Gleaner R70, commonly replaced wear parts include the 71371520H - Cylinder Rasp Bar, 71335675 - Slat; Feederhouse Chain, 3/8" Holes, 55194 - Belt, 01174421 - Filter, Oil, FF183 - Filter, Fuel, Spin-On (QTY 12), and 71174897 - Stationary Knife Kit.

FTR362-I - Bearing; 3 Bolt Triangular Flange Half
SKU: FTR362-I
753 in stock

72097583 - Bulb - 12V 21W (1156)
SKU: 72097583
115 in stock

621235M1 - Bulb - 12V 21W (1156)
SKU: 621235M1
115 in stock

801-871 - Bolt-On Black 11ga Top Serrated 13'
SKU: 801-871
Out of stock

71348515R - Black 14ga Big Tooth Headless Sickle Assembly
SKU: 71348515R
Out of stock

W7761220 - Blower Switch
SKU: W7761220
423 in stock

72274512 - Expansion Valve (block type)
SKU: 72274512
83 in stock

71380935 - Blower Switch
SKU: 71380935
423 in stock

71355100 - Receiver Drier
SKU: 71355100
2 in stock

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor
SKU: 71336550
18 in stock

71307202 - Expansion Valve (block type)
SKU: 71307202
83 in stock

71195109 - Switch Blower
SKU: 71195109
423 in stock

71190643 - High Pressure Switch
SKU: 71190643
7 in stock

71182664 - Clutch - York/Tecumseh Style (2 groove 7" pulley)
SKU: 71182664
66 in stock

71162474 - Thermostatic Switch
SKU: 71162474
73 in stock

70577454 - Switch Blower - 3 speed
SKU: 70577454
423 in stock

70257336 - CCW rotation) 5/16" X 2 1/2" shaft Blower Motor (12V
SKU: 70257336
7 in stock

317761220 - Sub To 220-215
SKU: 317761220
423 in stock

303432572 - Sub To 220-215
SKU: 303432572
423 in stock

303174409 - Blower Switch
SKU: 303174409
423 in stock

271105M1 - short shaft Switch Blower w/o resistor on switch
SKU: 271105M1
423 in stock

250698M1 - rotary 48" Switch Thermostatic
SKU: 250698M1
73 in stock

71355851 - Straw Chopper Knife Kit
SKU: 71355851
18 in stock

71174897 - Stationary Knife Kit
SKU: 71174897
448 in stock








