Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Gleaner L3 Combine Parts

Find parts for your Gleaner L3 Combine. We stock OEM and quality aftermarket replacements ready to ship.

The Gleaner L3 combine, produced from 1969 to 1978, was a popular choice for farmers due to its efficient conventional threshing system. Powered by a diesel engine producing approximately 165 horsepower, it offered ample power for its time. It could accommodate header widths up to 24 feet, making it a versatile machine for various grain harvesting operations.

About the L3

The Gleaner L3 combine was introduced in 1969 as a replacement for earlier Gleaner models and remained in production until 1978. It was equipped with an Allis-Chalmers 301 cubic inch, inline six-cylinder diesel engine producing around 165 horsepower. Threshing was accomplished via a conventional cylinder system, featuring a 42-inch wide cylinder and a large separation area that made it very good at harvesting wheat. The grain tank held approximately 170 bushels, and the unloading auger could empty it at a rate of around 50 bushels per minute. Header widths ranged from 13 to 24 feet. Chopper and spreader options were available to manage residue. The cab was designed with operator comfort in mind, offering a relatively quiet environment compared to older machines. The L3 was particularly well-suited for harvesting wheat, soybeans and corn.

L3 Specifications

EngineAllis-Chalmers 301 CID 165 HP Diesel
Separator TypeConventional - 42-inch wide cylinder
Grain Tank170 bushels
Unloading Rate50 bu/min
Header Widths13-24 ft
Fuel Capacity60 gallons
Weight14,500 lbs
Years Produced1969-1978

L3 Maintenance Tips

  • Concave Adjustment: Regularly check and adjust concave clearance according to the crop being harvested to optimize threshing efficiency and minimize grain damage.
  • Belt and Chain Tension: Inspect all belts and chains for wear and proper tension. Loose or worn belts and chains can lead to reduced performance and premature failure.
  • Sieve and Chaffer Cleaning: Clean sieves and chaffers frequently to prevent blockages and ensure clean grain samples. Use compressed air or brushes to remove debris.
  • Bearing Greasing: Grease all bearings regularly as per the manufacturer's recommendations to maintain smooth operation and extend bearing life.

L3 History & Background

The Gleaner L3 was a key model in Gleaner's L series, representing a significant step forward in combine technology during the late 1960s. It maintained Gleaner's reputation for transverse flow and natural material flow that improved harvest efficiency. It helped to solidify Gleaner's position as a leader in the combine market.

Frequently Asked Questions

Which water pump fits the Gleaner L3 combine?

The recommended replacement water pump for the Gleaner L3 combine is the 74036573 - Pump, Water.

What replacement starter solenoid is recommended for the Gleaner L3?

For the Gleaner L3, a suitable replacement starter solenoid is the 70271857 - Solenoid, Starter (12 Volt).

Which straw chopper knife kit is compatible with the Gleaner L3 combine?

The 71310275 - Straw Chopper Knife Kit is designed for use with the Gleaner L3 combine's straw chopper.

What are common replacement parts for the Gleaner L3 combine?

Showing 1-24 of 113 products
71348451 - Main Clutch Shaft

71348451 - Main Clutch Shaft

SKU: 71348451

$1006.76

10 in stock

71192723 - Engine Rear PTO Shaft

71192723 - Engine Rear PTO Shaft

SKU: 71192723

$309.13

8 in stock

71184195 - Wheel Brake Disc

71184195 - Wheel Brake Disc

SKU: 71184195

$255.65

20 in stock

71154856 - Hydro Shaft For DynaPower Brand Hydro

71154856 - Hydro Shaft For DynaPower Brand Hydro

SKU: 71154856

$202.32

8 in stock

79034572 - Thresher Countershaft Belt

79034572 - Thresher Countershaft Belt

SKU: 79034572

$209.71

5 in stock

79034570 - Pivot (RH) Belt
Out of Stock

79034570 - Pivot (RH) Belt

SKU: 79034570

$247.55

Out of stock

71322828 - Flex Cutter Bar Belt

71322828 - Flex Cutter Bar Belt

SKU: 71322828

$68.35

20 in stock

71311275 - Pick-up Drum & Draper Belt

71311275 - Pick-up Drum & Draper Belt

SKU: 71311275

$26.86

163 in stock

71305994 - Floating Cutter Bar Belt

71305994 - Floating Cutter Bar Belt

SKU: 71305994

$39.69

32 in stock

71193749 - AC Compressor Belt

71193749 - AC Compressor Belt

SKU: 71193749

$12.03

41 in stock

FTR362-I - Bearing; 3 Bolt Triangular Flange Half

FTR362-I - Bearing; 3 Bolt Triangular Flange Half

SKU: FTR362-I

$2.99

753 in stock

72097583 - Bulb - 12V 21W (1156)

72097583 - Bulb - 12V 21W (1156)

SKU: 72097583

$2.83

115 in stock

621235M1 - Bulb - 12V 21W (1156)

621235M1 - Bulb - 12V 21W (1156)

SKU: 621235M1

$2.83

115 in stock

71131910 - PTO Output Shaft Bearing

71131910 - PTO Output Shaft Bearing

SKU: 71131910

$18.54

89 in stock

W7761220 - Blower Switch

W7761220 - Blower Switch

SKU: W7761220

$12.07

423 in stock

72274512 - Expansion Valve (block type)

72274512 - Expansion Valve (block type)

SKU: 72274512

$33.96

83 in stock

71380935 - Blower Switch

71380935 - Blower Switch

SKU: 71380935

$12.07

423 in stock

71369764 - Expansion Valve (block type)

71369764 - Expansion Valve (block type)

SKU: 71369764

$33.96

83 in stock

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor

SKU: 71336550

$662.78

18 in stock

71307202 - Expansion Valve (block type)

71307202 - Expansion Valve (block type)

SKU: 71307202

$33.96

83 in stock

71195109 - Switch Blower

71195109 - Switch Blower

SKU: 71195109

$12.07

423 in stock

71193543 - Receiver Drier

71193543 - Receiver Drier

SKU: 71193543

$47.14

41 in stock

71190643 - High Pressure Switch

71190643 - High Pressure Switch

SKU: 71190643

$36.58

7 in stock

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor  (12V

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor (12V

SKU: 71188287

$101.63

21 in stock