Gleaner M3 Combine Parts
Shop Gleaner M3 Combine parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The Gleaner M3 combine, produced from the mid-1970s to the early 1980s, became a favorite among farmers due to its efficient harvesting capabilities and durable design. Powered by engines ranging from 165 to 185 HP, it offered header widths up to 24 feet, accommodating various field sizes. This combine utilized a conventional cylinder separator, known for its effective threshing and separation of grain.
About the M3
The Gleaner M3 was a workhorse in the Gleaner lineup, produced from 1976 to 1982, building upon the legacy of its predecessors. It typically featured a Cummins or a Deutz diesel engine, delivering between 165 and 185 horsepower, with displacements around 5.9 liters. The M3 employed a conventional cylinder and concave system for threshing, followed by straw walkers for separation, a design valued for its ability to handle tough crop conditions. Grain tank capacity was approximately 180 bushels, and the unloading auger could empty the tank at a rate of around 50 bushels per minute. Farmers could equip the M3 with headers ranging from 13 to 24 feet wide. Options included a chopper or spreader to manage crop residue. The cab offered basic comfort and controls for the operator. The Gleaner M3 excelled at harvesting wheat, soybeans, and corn, demonstrating its versatility across different crops.
M3 Specifications
| Engine | Cummins/Deutz 165-185 HP Diesel |
|---|---|
| Separator Type | Conventional - Cylinder and Concave |
| Grain Tank | 180 bushels |
| Unloading Rate | 50 bu/min |
| Header Widths | 13-24 ft |
| Fuel Capacity | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | 1976-1982 |
M3 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance to match the crop being harvested. Proper adjustment minimizes grain loss and maximizes threshing efficiency.
- Belt and Chain Tension: Check and maintain proper tension on all belts and chains to prevent slippage and ensure smooth operation of the combine's various systems.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer regularly to remove debris and ensure proper air flow. This prevents grain loss and improves sample quality.
- Bearing Greasing: Grease all bearings at the recommended intervals to prevent premature wear and ensure smooth, reliable operation. Consult the operator's manual for specific grease points and intervals.
M3 History & Background
The Gleaner M3 was introduced in 1976 as an upgrade to previous Gleaner models, offering improvements in engine power and capacity. While it retained the conventional threshing system, it provided farmers with a reliable and durable option for harvesting. The M3 played a significant role in maintaining Gleaner's reputation for quality and innovation in combine design.
Frequently Asked Questions
Which water pump fits the Gleaner M3?
For the Gleaner M3, the recommended water pump is 74036573.
What type of finger guide is recommended for the Gleaner M3?
The 71146965 - Finger Guide (Poly) is a suitable replacement for the Gleaner M3.
Which straw chopper knife kit is compatible with the Gleaner M3?
The 71310275 - Straw Chopper Knife Kit is designed for use with the Gleaner M3.
What are common parts needed for the M3?
For the Gleaner M3, frequently replaced components include the 71311275 - Belt, Pick-up Drum & Draper, 195207M1 - Bearing, Trans Release (sealed), 71188840 - Finger Guide (Forged), 71194972 - Bushing, Shoe, and the 70271857 - Solenoid, Starter (12 Volt).

71192723 - Engine Rear PTO Shaft
SKU: 71192723
8 in stock

71184195 - Wheel Brake Disc
SKU: 71184195
20 in stock

71154856 - Hydro Shaft For DynaPower Brand Hydro
SKU: 71154856
8 in stock

79034572 - Thresher Countershaft Belt
SKU: 79034572
5 in stock

79034570 - Pivot (RH) Belt
SKU: 79034570
Out of stock

71322828 - Flex Cutter Bar Belt
SKU: 71322828
20 in stock

71311275 - Pick-up Drum & Draper Belt
SKU: 71311275
163 in stock

71305994 - Floating Cutter Bar Belt
SKU: 71305994
32 in stock

71193749 - AC Compressor Belt
SKU: 71193749
41 in stock

FTR362-I - Bearing; 3 Bolt Triangular Flange Half
SKU: FTR362-I
753 in stock

71131910 - PTO Output Shaft Bearing
SKU: 71131910
89 in stock

W7761220 - Blower Switch
SKU: W7761220
423 in stock

72274512 - Expansion Valve (block type)
SKU: 72274512
83 in stock

71380935 - Blower Switch
SKU: 71380935
423 in stock

71369764 - Expansion Valve (block type)
SKU: 71369764
83 in stock

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor
SKU: 71336550
18 in stock

71307202 - Expansion Valve (block type)
SKU: 71307202
83 in stock

71195109 - Switch Blower
SKU: 71195109
423 in stock

71193543 - Receiver Drier
SKU: 71193543
41 in stock

71190643 - High Pressure Switch
SKU: 71190643
7 in stock

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor (12V
SKU: 71188287
21 in stock

71182664 - Clutch - York/Tecumseh Style (2 groove 7" pulley)
SKU: 71182664
66 in stock

71162474 - Thermostatic Switch
SKU: 71162474
73 in stock

70577454 - Switch Blower - 3 speed
SKU: 70577454
423 in stock








