Gleaner M2 Combine Parts
Find parts for your Gleaner M2 Combine. We stock OEM and quality aftermarket replacements ready to ship.
The Gleaner M2 combine, manufactured from 1969 to 1992, was known for its reliability and innovative design. Powered by engines ranging from 105 to 155 HP, it offered header widths up to 30 feet for efficient harvesting. This conventional separator combine quickly became a popular choice among farmers due to its simplicity and ease of maintenance.
About the M2
The Gleaner M2 was a workhorse in fields across the United States and beyond, produced from 1969 until 1992. Early models featured a variety of engine options, with later models commonly using an Allis-Chalmers 301 cubic inch, or 301T turbocharged diesel engine rated up to 155 horsepower. It utilizes a conventional threshing system with a 50-inch wide cylinder. Grain tank capacity varies slightly by year but generally holds around 180 bushels. The unloading auger speed is approximately 60 bushels per minute. Available header widths ranged from 13 feet up to 30 feet, accommodating various field sizes and crop types. It was often equipped with a straw chopper or spreader, depending on the customer's needs. The cab provided basic operator comfort and controls. The M2 excelled at harvesting a variety of crops, including wheat, soybeans, and corn, making it a versatile machine for many farms. The 301T was rated at 145 hp at 2400 rpms. The M2 was upgraded with a larger 360 cubic inch allis chalmers engine in 1978.
M2 Specifications
| Engine | Allis-Chalmers 301T 155 HP Turbo Diesel |
|---|---|
| Separator Type | Conventional - 50" Cylinder width |
| Grain Tank | 180 bushels |
| Unloading Rate | 60 bu/min |
| Header Widths | 13-30 ft |
| Fuel Capacity | 65 gallons |
| Weight | 14,000 lbs |
| Years Produced | 1969-1992 |
M2 Maintenance Tips
- Regularly inspect and adjust the concave clearance to ensure optimal threshing performance and minimize grain damage.
- Check and maintain proper tension on all belts and chains, replacing worn components to prevent breakdowns during harvest.
- Thoroughly clean the sieves and chaffer after each use to remove debris and maintain efficient grain cleaning.
- Grease all bearings according to the manufacturer's recommendations to prevent premature wear and failure.
M2 History & Background
Introduced in 1969, the Gleaner M2 was a continuation of the Gleaner M series, known for its innovative transverse-flow design. It received engine upgrades and minor improvements throughout its long production run. The M2 solidified Gleaner's reputation for building durable and reliable combines.
Frequently Asked Questions
Which water pump is suitable for the Gleaner M2?
A high-quality replacement water pump for the Gleaner M2 is the 74036573 - Pump, Water.
What starter solenoid is recommended for the Gleaner M2?
The 70271857 - Solenoid, Starter (12 Volt) is a reliable replacement for the Gleaner M2.
Which thermostatic switch fits the Gleaner M2 combine?
For temperature regulation on the Gleaner M2, consider the 71162474 - Thermostatic Switch.
What are common wear parts needed for the Gleaner M2?
Common wear parts for the Gleaner M2 include the 71174897 - Stationary Knife Kit, 71146965 - Finger Guide (Poly), 71311275 - Belt, Pick-up Drum & Draper, 71194972 - Bushing, Shoe, 71308646 - Walker Wood Block, and the FTR362-I - Flange Half, Bearing; 3 Bolt Triangular.

71192723 - Engine Rear PTO Shaft
SKU: 71192723
8 in stock

71184195 - Wheel Brake Disc
SKU: 71184195
20 in stock

71154856 - Hydro Shaft For DynaPower Brand Hydro
SKU: 71154856
8 in stock

79034572 - Thresher Countershaft Belt
SKU: 79034572
5 in stock

71322828 - Flex Cutter Bar Belt
SKU: 71322828
20 in stock

71311275 - Pick-up Drum & Draper Belt
SKU: 71311275
163 in stock

71305994 - Floating Cutter Bar Belt
SKU: 71305994
32 in stock

71193749 - AC Compressor Belt
SKU: 71193749
41 in stock

FTR362-I - Bearing; 3 Bolt Triangular Flange Half
SKU: FTR362-I
753 in stock

901-025 - Sickle Head
SKU: 901-025
8 in stock

71131910 - PTO Output Shaft Bearing
SKU: 71131910
89 in stock

W7761220 - Blower Switch
SKU: W7761220
423 in stock

72274512 - Expansion Valve (block type)
SKU: 72274512
83 in stock

71380935 - Blower Switch
SKU: 71380935
423 in stock

71369764 - Expansion Valve (block type)
SKU: 71369764
83 in stock

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor
SKU: 71336550
18 in stock

71307202 - Expansion Valve (block type)
SKU: 71307202
83 in stock

71195109 - Switch Blower
SKU: 71195109
423 in stock

71193543 - Receiver Drier
SKU: 71193543
41 in stock

71190643 - High Pressure Switch
SKU: 71190643
7 in stock

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor (12V
SKU: 71188287
21 in stock

71182664 - Clutch - York/Tecumseh Style (2 groove 7" pulley)
SKU: 71182664
66 in stock

71162474 - Thermostatic Switch
SKU: 71162474
73 in stock

70577454 - Switch Blower - 3 speed
SKU: 70577454
423 in stock








