Gleaner E3 Combine Parts
Browse Gleaner E3 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The Gleaner E3 combine, produced from 1986-1992, offered farmers a reliable and efficient harvesting solution. Powered by a Deutz diesel engine delivering approximately 165 horsepower, the E3 came with header widths ranging from 13 to 30 feet, suitable for various field sizes. Its conventional cylinder separator made it a popular choice for its simplicity and ability to handle a wide range of crops effectively.
About the E3
The Gleaner E3 combine was introduced in 1986 and remained in production until 1992, building upon Gleaner's reputation for innovative harvesting technology. It was powered by a Deutz F5L912 naturally aspirated diesel engine, offering approximately 165 horsepower with a displacement of around 380 cubic inches. The E3 utilized a conventional cylinder separator, featuring a 40-inch wide cylinder with rasp bars to effectively thresh grain. It boasts a grain tank capacity of approximately 170 bushels and an unloading auger capable of emptying the tank at a rate of around 45 bushels per minute. Available header widths ranged from 13 to 30 feet, providing versatility for different row spacings and crop types. Options included a straw chopper or spreader for residue management. The cab provided a comfortable operator environment with basic controls and instrumentation. The Gleaner E3 was particularly well-regarded for harvesting wheat, soybeans, and corn, known for its good grain quality and reliable performance.
E3 Specifications
| Engine | Deutz F5L912 165 HP Diesel |
|---|---|
| Separator Type | Conventional - 40" Cylinder with Rasp Bars |
| Grain Tank | 170 bushels |
| Unloading Rate | 45 bu/min |
| Header Widths | 13-30 ft |
| Fuel Capacity | 65 gallons |
| Weight | Approx. 16,500 lbs |
| Years Produced | 1986-1992 |
E3 Maintenance Tips
- Regularly inspect and adjust the concave clearance to optimize threshing performance and minimize grain loss.
- Maintain proper belt and chain tension to prevent slippage and ensure smooth operation of all components.
- Thoroughly clean the sieves and chaffers to prevent clogging and maintain optimal cleaning efficiency, especially when switching between different crops.
- Grease all bearings and lubrication points regularly according to the manufacturer's recommendations to prevent premature wear and failure.
E3 History & Background
The Gleaner E3 was introduced in 1986 as a mid-sized combine in the Gleaner lineup, offering a balance of power and capacity. It continued Gleaner's tradition of transverse-flow combines. While not revolutionary, the E3 provided reliable performance and became a popular choice for farmers seeking a dependable and affordable harvesting solution.
Frequently Asked Questions
Which water pump fits the Gleaner E3?
For the Gleaner E3, the recommended replacement is the 79003710 - Pump, Water w/ Single Pulley, designed for reliable engine cooling.
What air filter is suitable for the Gleaner E3?
A primary air filter recommended for the Gleaner E3 is the AF435KM - Filter, Air, Primary, which helps maintain engine performance by protecting against contaminants.
What replacement sprocket is used for the cylinder drive on the Gleaner E3?
The 71131901 - Sprocket, Cylinder Drive is the appropriate replacement part for maintaining the cylinder's drive system in your Gleaner E3.
What are some essential replacement parts for the Gleaner E3 combine?
Essential replacement parts for the Gleaner E3 include a 71127204 - Reel Tooth, a 71146965 - Finger Guide (Poly), and a FTR362-I - Flange Half, Bearing; 3 Bolt Triangular. Additionally, a LF3313J - Filter, Lube, Full-Flow Spin-On and a 71162474 - Thermostatic Switch are often needed to ensure optimal operation.

71131341 - Main Drive Clutch Input Shaft
SKU: 71131341
46 in stock

FTR362-I - Bearing; 3 Bolt Triangular Flange Half
SKU: FTR362-I
753 in stock

71131910 - PTO Output Shaft Bearing
SKU: 71131910
89 in stock

841551 - Receiver Drier
SKU: 841551
53 in stock

772075M91 - Receiver Drier
SKU: 772075M91
53 in stock

72275588 - Expansion Valve (Block Type)
SKU: 72275588
45 in stock

7227558 - Expansion Valve
SKU: 7227558
45 in stock

72084697 - Expansion Valve
SKU: 72084697
47 in stock

71506527 - Expansion Valve
SKU: 71506527
45 in stock

71374336 - CCW rotation) 5/16" X 2 1/2" shaft Blower Motor (12V
SKU: 71374336
7 in stock

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor (12V
SKU: 71188287
21 in stock

71182664 - Clutch - York/Tecumseh Style (2 groove 7" pulley)
SKU: 71182664
66 in stock

71162967 - Receiver Drier
SKU: 71162967
42 in stock

71162474 - Thermostatic Switch
SKU: 71162474
73 in stock

71162473 - Expansion Valve
SKU: 71162473
45 in stock

71160956 - Expansion Valve
SKU: 71160956
47 in stock

70268470 - Expansion Valve
SKU: 70268470
45 in stock

70259978 - Expansion Valve
SKU: 70259978
339 in stock

70259379 - Expan.Valve
SKU: 70259379
339 in stock

70257681 - CW rotation) 5/16" X 1 3/8" shaft Blower Motor - Condenser (12V
SKU: 70257681
21 in stock

70257336 - CCW rotation) 5/16" X 2 1/2" shaft Blower Motor (12V
SKU: 70257336
7 in stock

70257322 - Expansion Valve
SKU: 70257322
45 in stock

7022304 - Expansion Valve
SKU: 7022304
45 in stock

529876M91 - Expansion Valve (12" Flare Type Internally Regulated)
SKU: 529876M91
47 in stock








