Ford New Holland TD5020 Tractor Parts

TD5020 parts and accessories

The Ford New Holland TD5020 tractor, manufactured from 2008-2012, was a reliable workhorse for many farmers. Powered by a dependable 75 HP diesel engine, and delivering 65 PTO horsepower, the TD5020 was particularly popular due to its versatility in handling a wide array of agricultural tasks, from haying to light tillage. Its straightforward design made it easy to operate and maintain.

The Ford New Holland TD5020 was part of the TD5000 series, produced between 2008 and 2012. It was designed as a utility tractor for diverse farming operations. The engine is an Iveco 8035.06 3.0L 3-cylinder diesel engine, producing approximately 75 horsepower. This engine offered a good balance of power and fuel efficiency. The TD5020 typically featured a mechanical transmission with 12 forward and 12 reverse gears, providing ample speed options for different tasks. The PTO horsepower is rated at 65 HP, with a standard 540 RPM PTO. Hydraulically, the TD5020 had a flow rate of around 13.2 GPM powering two rear remotes. The 3-point hitch is a Category II, with a lift capacity of approximately 5,732 lbs. Common applications included hay production, livestock operations (feeding and manure handling), light tillage (disking and cultivating), and row crop work. Compared to other models in the lineup, the TD5020 offered a step up in power from the smaller TD5010, while remaining a relatively compact and maneuverable tractor.

Specifications

Engine	Iveco 8035.06 75 HP 3.0L Diesel
PTO HP	65 HP @ 540 RPM
Transmission	Mechanical 12F/12R
Hydraulics	13.2 GPM, 2 remotes
3-Point Hitch	Category II, 5732 lbs
Fuel Capacity	23.8 gallons
Weight	6,614 lbs
Years Produced	2008-2012

Maintenance Tips

Engine Oil and Filter: Change the engine oil and filter every 250 hours of operation using a high-quality oil that meets the manufacturer's specifications.
Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic filter every 500 hours or as recommended by the manufacturer. Use only specified hydraulic fluid to prevent damage.
Fuel System: Use clean, high-quality diesel fuel. Regularly drain the fuel/water separator to prevent water from entering the fuel system. Consider adding a fuel stabilizer during seasonal storage.
Seasonal Storage: Before storing the tractor for extended periods, fill the fuel tank to prevent condensation, grease all lubrication points, and disconnect the battery. Store the tractor in a dry location.

History & Background

The Ford New Holland TD5020 was introduced in 2008 as part of the TD5000 series, aiming to provide farmers with a reliable and versatile utility tractor. There were no major redesigns during its production run. The TD5020 contributed to the ongoing legacy of Ford New Holland tractors as a dependable choice for various agricultural tasks.

Frequently Asked Questions

What engine is in the Ford New Holland TD5020?

The Ford New Holland TD5020 is equipped with an Iveco 8035.06 3.0L 3-cylinder diesel engine producing approximately 75 horsepower.

What is the PTO horsepower on a TD5020?

The PTO horsepower on the Ford New Holland TD5020 is rated at 65 HP, with a standard PTO speed of 540 RPM.

What oil filter fits the TD5020?

The oil filter commonly used on the TD5020 is a New Holland 84222210 or equivalent, which cross-references to Wix 51348, Fram PH3614, or Baldwin B1400.

What are common parts needed for the TD5020?

Common wear parts include engine oil filters, fuel filters, air filters, hydraulic filters, fan belts, hydraulic cylinder seals, tie rod ends, and clutch components.

Showing 1-24 of 53 products

Sort by: