Ford New Holland TD5010 Tractor Parts

TD5010 parts and accessories

The Ford New Holland TD5010, manufactured from 2008-2012, was a versatile utility tractor popular among farmers for its reliable performance and ease of use. Powered by a 75 HP Iveco diesel engine, the TD5010 provided ample power for various tasks, including loader work and pulling implements. Its 64 PTO horsepower made it well-suited for operating rotary cutters, balers, and other PTO-driven equipment.

The Ford New Holland TD5010 was introduced as part of the TD5000 series, offering a modern design and improved features compared to earlier Ford and New Holland models. Production spanned from 2008 to 2012. Under the hood is a 3.9L (239 cubic inch) Iveco 8045.45.267 turbocharged diesel engine producing approximately 75 horsepower. This tractor featured a mechanical 12-speed forward and 12-speed reverse transmission. PTO horsepower is rated at 64 HP, with a standard 540 RPM PTO, although a 540/1000 RPM option was also available. The hydraulic system boasts a flow rate of around 13.2 GPM, supporting two standard rear remotes. The 3-point hitch is a Category II, with a lift capacity of approximately 5,512 lbs. The TD5010 was commonly used for various farming applications, including hay production, livestock operations, and general utility work. It distinguished itself from other models by providing a good balance of power, features, and affordability, making it a popular choice for small to medium-sized farms.

Specifications

Engine	Iveco 75 HP Diesel, 239 ci
PTO HP	64 HP @ 540 RPM
Transmission	Mechanical 12F/12R
Hydraulics	13.2 GPM, 2 remotes
3-Point Hitch	Category II, 5512 lbs
Fuel Capacity	22.5 gallons
Weight	6614 lbs
Years Produced	2008-2012

Maintenance Tips

Check and change the engine oil and filter every 250 hours using the manufacturer-recommended oil type and filter.
Inspect and clean the hydraulic oil filter and change the hydraulic oil every 1000 hours or annually to maintain hydraulic system performance and prevent contamination.
Regularly inspect the fuel system, including the fuel filter, for any signs of leaks or contamination, and replace the filter as needed to ensure proper engine operation.
Before seasonal storage, drain all fluids (fuel, coolant, oil), lubricate all grease fittings, and store the tractor in a dry, covered area to prevent rust and corrosion.

History & Background

The Ford New Holland TD5010 was launched in 2008 as part of the TD5000 series, aiming to provide a modern and versatile tractor for a wide range of farming tasks. There were no major redesigns during its production run. The TD5010 played a significant role in providing a reliable and affordable tractor option for farmers, contributing to increased productivity and efficiency on many farms.

Frequently Asked Questions

What engine is in the Ford New Holland TD5010?

The Ford New Holland TD5010 is equipped with a 3.9L (239 ci) Iveco 8045.45.267 turbocharged diesel engine, producing approximately 75 horsepower.

What is the PTO horsepower on a TD5010?

The PTO horsepower on the TD5010 is rated at 64 HP at 540 RPM. A 540/1000 RPM PTO option was also available.

What oil filter fits the TD5010?

The oil filter for the TD5010 typically uses a filter such as a Fleetguard LF3349 or a cross-reference equivalent such as a Wix 51791 or a Baldwin B1421. Always verify with your parts supplier for the correct filter based on your specific engine configuration.

What are common parts needed for the TD5010?

Common wear parts for the TD5010 include engine oil filters, fuel filters, air filters, hydraulic filters, belts (fan, alternator), hydraulic seals, steering components (tie rod ends), and clutch parts (clutch disc, pressure plate, throwout bearing).

Showing 1-24 of 53 products

Sort by: