Ford New Holland 971 Tractor Parts
971 parts and accessories
The Ford New Holland 971 tractor, manufactured from 1958 to 1962, was a popular choice for farmers due to its reliable engine and versatile capabilities. Powered by a gasoline or diesel engine producing approximately 48-52 horsepower, it offered robust performance for a variety of agricultural tasks. With a PTO horsepower rating of around 42, the 971 delivered ample power for implements, contributing to its widespread adoption and lasting legacy in farming.
The Ford New Holland 971 was a key model in the 'Hundred Series' of tractors, produced from 1958 to 1962. These tractors were designed to offer improved power and performance compared to their predecessors. The 971 came with a choice of gasoline or diesel engines. The gasoline version featured a 172 cubic inch Ford engine, while the diesel version boasted a similar displacement. Both engine options typically produced between 48 and 52 horsepower. The transmission was typically a four-speed manual gear transmission offering various speed ranges. The 971 delivered a PTO horsepower of approximately 42 at 540 RPM. Hydraulic capacity was around 6 GPM, powering implements and the 3-point hitch. Equipped with a Category I 3-point hitch, the 971 was well-suited for a wide range of farming applications, including row crop work, hay production, and general livestock operations. Its combination of reliability and versatility distinguished it within the Ford New Holland lineup, making it a favorite among farmers during its production era.
Specifications
| Engine | Ford 172ci Gasoline/Diesel, 48-52 HP |
|---|---|
| PTO HP | 42 HP @ 540 RPM |
| Transmission | 4-Speed Manual |
| Hydraulics | 6 GPM, 1 remote |
| 3-Point Hitch | Category I, 2200 lbs lift capacity |
| Fuel Capacity | 17 gallons |
| Weight | 4000 lbs |
| Years Produced | 1958-1962 |
Maintenance Tips
- Engine Oil & Filter: Change the engine oil and filter every 100-150 hours of operation. Use the recommended oil type and a quality oil filter for optimal engine protection.
- Hydraulic System Maintenance: Check hydraulic fluid levels regularly and replace the hydraulic filter according to the manufacturer's recommendations (typically every 300-400 hours). Inspect hydraulic hoses and fittings for leaks or damage.
- Fuel System Care: Use clean fuel and consider adding a fuel stabilizer, especially during seasonal storage, to prevent fuel degradation and clogging. Check and clean the fuel filter regularly.
- Seasonal Storage: Before storing the tractor for an extended period, drain fluids and add anti-freeze, lubricate all grease fittings, and cover the tractor to protect it from the elements. Disconnect the battery or use a battery tender.
History & Background
Introduced in 1958, the Ford New Holland 971 was part of the 'Hundred Series,' representing a significant upgrade in power and features over earlier Ford tractor models. This series aimed to modernize farming operations with increased efficiency. The 971 played a vital role in the transition to more powerful and versatile tractors, leaving a lasting impact on agricultural practices.
Frequently Asked Questions
What engine is in the Ford New Holland 971?
The Ford New Holland 971 was available with either a Ford 172 cubic inch gasoline engine or a similar displacement diesel engine, both producing between 48 and 52 horsepower.
What is the PTO horsepower on a 971?
The Ford New Holland 971 delivers approximately 42 PTO horsepower at 540 RPM.
What oil filter fits the 971?
The Ford New Holland 971 typically uses a Fram PH8A, Wix 51060, or equivalent oil filter. Consult your tractor's manual or a parts specialist to confirm the correct filter for your specific engine type.
What are common parts needed for the 971?
Common parts needed for the Ford New Holland 971 include air filters, oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic seals, steering components (tie rod ends), clutch discs, pressure plates, and throwout bearings.

310062 - Sealed Beam Bulb (12 Volt)
SKU: 310062
21 in stock

310061 - Sealed Beam Bulb (6 Volt)
SKU: 310061
306 in stock

RW10286 - Rear Wheel 10" x 28" Rim
SKU: RW10286
80 in stock

FW45166 - Front Wheel 4.5" x 16" Rim
SKU: FW45166
375 in stock

C5NN747A - PTO Housing Gasket
SKU: C5NN747A
1200 in stock

9N735B - 1.125" PTO Shaft Sleeve
SKU: 9N735B
102 in stock

E8NN19D629AA - Comp. W/ Clutch (Sanden Style)
SKU: E8NN19D629AA
59 in stock

D5NN18527AA - 3sp) Rev rotation 3/8" X 4 1/4" shaft Blower Motor (4 wire) (12volt
SKU: D5NN18527AA
129 in stock

D3NN19D623A - York w/o Clutch (LH Suction Rotolock Head) New Compressor
SKU: D3NN19D623A
27 in stock

D3NN19825A - Receiver Drier
SKU: D3NN19825A
35 in stock

D3NN19618A - Thermostatic Switch
SKU: D3NN19618A
493 in stock

D2NN19D649A - Clutch - York/Tecumseh Style ( 2 groove 7" pulley)
SKU: D2NN19D649A
45 in stock

NAA5230E - Muffler
SKU: NAA5230E
722 in stock

B9NN7A381B - Transmission (2nd) Gear
SKU: B9NN7A381B
8 in stock

86533415 - Brake Drum
SKU: 86533415
34 in stock

NAA55250B - Manifold Elbow
SKU: NAA55250B
8 in stock

C0NN6700A - Front Crankshaft Seal
SKU: C0NN6700A
95 in stock

C0NN6251A - Camshaft
SKU: C0NN6251A
41 in stock

9N6384 - Flywheel Ring Gear
SKU: 9N6384
346 in stock

8N6766B - Oil Filler & Breather; One Piece Cap
SKU: 8N6766B
66 in stock

73222 - Pre Cleaner Bowl
SKU: 73222
460 in stock

311292 - Fuel Shutoff (1/4" Line) Valve
SKU: 311292
235 in stock

310075 - Exhaust Elbow
SKU: 310075
52 in stock

310030 - Oil Filler & Breather Cap
SKU: 310030
68 in stock
