Ford New Holland 6610S Tractor Parts

6610S parts and accessories

The Ford New Holland 6610S, manufactured from 1986 to 1992, was a popular utility tractor known for its reliability and versatility. Powered by a robust 67 HP diesel engine and delivering approximately 60 PTO horsepower, the 6610S was a workhorse on many farms. Its combination of power and maneuverability made it ideal for a wide range of agricultural tasks, contributing to its widespread adoption.

The Ford New Holland 6610S was introduced in 1986 as part of the 'S' series, an upgrade to the earlier 6610 models. Production continued until 1992. It featured a Shibaura 3.3L 3-cylinder diesel engine producing approximately 67 horsepower. This engine provided ample power for various farm tasks while maintaining good fuel economy. The transmission was typically an 8-speed manual gear transmission, providing a good range of speeds for different applications. The PTO delivered around 60 horsepower, available at 540 RPM. The hydraulic system had a capacity of around 11.5 GPM, providing sufficient flow for implements and attachments. It featured a Category II 3-point hitch, capable of lifting approximately 3,500 lbs. Common applications included haying, livestock feeding, light tillage, and row crop work. What distinguished the 6610S was its improved operator comfort, enhanced hydraulic performance compared to older models, and its overall dependability, making it a valued asset for farmers.

Specifications

Engine	Shibaura 3.3L 67 HP Diesel
PTO HP	60 HP @ 540 RPM
Transmission	8-speed manual
Hydraulics	11.5 GPM, 2 remotes
3-Point Hitch	Category II, 3500 lbs lift capacity
Fuel Capacity	23 gallons
Weight	6000 lbs
Years Produced	1986-1992

Maintenance Tips

Change the engine oil and filter every 250 hours of operation using a high-quality oil formulated for diesel engines.
Inspect and clean the hydraulic system filters regularly to prevent contamination and maintain optimal performance. Check hydraulic fluid levels and top off with the correct type of hydraulic fluid.
Use a fuel stabilizer during seasonal storage to prevent fuel degradation and keep the fuel system clean. Drain any water from the fuel/water separator regularly.
Inspect and lubricate all grease fittings regularly, including those on the steering linkage, front axle, and PTO shaft.

History & Background

The Ford New Holland 6610S was a significant upgrade over the previous 6610 model. Introduced in 1986, it incorporated improvements in operator comfort and hydraulic performance. This tractor played a crucial role in modernizing farming practices and remains a respected model for its balance of power and reliability.

Frequently Asked Questions

What engine is in the Ford New Holland 6610S?

The Ford New Holland 6610S is equipped with a Shibaura 3.3L 3-cylinder diesel engine, producing approximately 67 horsepower.

What is the PTO horsepower on a 6610S?

The PTO horsepower on the Ford New Holland 6610S is approximately 60 HP at 540 RPM.

What oil filter fits the 6610S?

The oil filter for the Ford New Holland 6610S is commonly cross-referenced as a Fram PH3600, Wix 51794, or equivalent. Always verify fitment with your parts supplier.

What are common parts needed for the 6610S?

Commonly needed parts for the Ford New Holland 6610S include engine oil filters, fuel filters, air filters, hydraulic filters, belts, radiator hoses, hydraulic seals, steering components (tie rod ends), clutch discs, and pressure plates.

Showing 1-24 of 388 products

Sort by: