Ford New Holland 5000 Tractor Parts
Ford New Holland 5000 Tractor parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.
The Ford New Holland 5000, manufactured from 1965 to 1975, was a popular choice among farmers due to its reliable performance and versatility. Powered by a robust diesel engine producing around 54 horsepower, it delivered ample power for a variety of tasks. Its PTO horsepower of approximately 47 made it well-suited for operating implements like mowers and balers, contributing to its widespread adoption in hay and livestock operations.
About the 5000
The Ford 5000 tractor, produced from 1965 to 1975, quickly gained a reputation for being a dependable and versatile workhorse. It was a staple on farms of all sizes. The standard engine was a Ford 175 CID 3-cylinder diesel engine that produced approximately 54 horsepower. A gasoline engine was also available in some markets. The diesel engine's robust design and fuel efficiency contributed to the tractor's popularity. The tractor typically featured a manual transmission with either 6 forward and 2 reverse gears, or an optional 8 forward and 2 reverse speed transmission. The PTO delivered around 47 horsepower at 540 RPM, enabling it to power a wide range of implements. The hydraulic system had a capacity of around 8.5 GPM. It was equipped with a Category II 3-point hitch, offering a lift capacity of approximately 3,500 lbs, depending on the specific configuration. Farmers commonly used the 5000 for tillage, planting, mowing, baling hay, and general utility work. Compared to smaller Ford models, the 5000 offered significantly more power and lifting capacity, making it suitable for heavier-duty tasks.
5000 Specifications
| Engine | Ford 175 CID 54 HP Diesel |
|---|---|
| PTO HP | 47 HP @ 540 RPM |
| Transmission | Manual 6F/2R or 8F/2R |
| Hydraulics | 8.5 GPM, 1-2 remotes |
| 3-Point Hitch | Category II, 3500 lbs |
| Fuel Capacity | 17 gallons |
| Weight | 5000 lbs |
| Years Produced | 1965-1975 |
5000 Maintenance Tips
- Change the engine oil and filter every 250 hours of operation, using a high-quality oil that meets Ford's specifications for diesel engines.
- Inspect and maintain the hydraulic system regularly, checking for leaks, and replacing hydraulic filters every 500 hours to ensure optimal performance.
- Use clean, high-quality diesel fuel and replace the fuel filter every 250 hours to prevent fuel system issues.
- Before storing the tractor for the off-season, drain the fuel tank, add fuel stabilizer, and grease all lubrication points to prevent corrosion.
5000 History & Background
Introduced in 1965, the Ford 5000 filled a crucial gap in Ford's tractor lineup, providing a mid-range option that offered more power than smaller models but was more economical than larger, more expensive tractors. It received minor updates throughout its production run, but the core design remained relatively consistent, cementing its place as a reliable and widely used tractor in agricultural history.
Frequently Asked Questions
Which fuel injector is suitable for the Ford New Holland 5000?
The C5NE9F593C - Injector is a suitable replacement for the Ford New Holland 5000.
What fuel filter is recommended for the Ford New Holland 5000?
For the Ford New Holland 5000, consider the 83937061 - Filter, Fuel.
Which power steering filter fits the Ford New Holland 5000?
The EDPN3K758A - Filter, Power Steering is a suitable fit for the Ford New Holland 5000.
What are common parts needed for the 5000?
Commonly needed parts for the Ford New Holland 5000 include wheel nuts such as the 81815739 - Nut, Wheel (1/2-20), valve keepers like the F2NN6518AA - Keeper, Valve, and brake rod seals such as the C5NN2N336A - Brake Rod Seal. Other frequent replacements include the NDA7580B - Bearing, Release (sealed), E9NN8255AA - Gasket; Thermostat, and the PBB77573A - Plate, PTO Steel.

VTK700 - Valve Train Kit
SKU: VTK700
Out of stock

VTK197 - Valve Train Kit
SKU: VTK197
Out of stock

VPD8500 - Fuel Injector Seal Kit
SKU: VPD8500
272 in stock

SD756 - Cylinder (Semi-Finished) Liner
SKU: SD756
61 in stock

SD753 - Cylinder (Semi-Finished) Liner
SKU: SD753
28 in stock

RK158-40 - Piston with Rings (.040")
SKU: RK158-40
2 in stock

RK158-30 - Piston with Rings (.030")
SKU: RK158-30
6 in stock

RK158-20 - Piston with Rings (.020")
SKU: RK158-20
Out of stock

RK158 - Piston with Rings (Std)
SKU: RK158
36 in stock

RK156-40 - Piston with Rings (.040")
SKU: RK156-40
1 in stock

RK156-30 - Piston with Rings (.030")
SKU: RK156-30
2 in stock

RK156-20 - Piston with Rings (.020")
SKU: RK156-20
9 in stock

RK156 - Piston with Rings (Std)
SKU: RK156
23 in stock

E3NN3308BA - Front Drag Link End
SKU: E3NN3308BA
19 in stock

E3NN3307AA - Short Tie Rod
SKU: E3NN3307AA
68 in stock

E0NN3304CA - Drag Link End
SKU: E0NN3304CA
67 in stock

C7NN3B161A - Long (LH) Tie Rod Tube
SKU: C7NN3B161A
29 in stock

C7NN3A300A - Drag Link End (Front)
SKU: C7NN3A300A
35 in stock

C7NN3307B - Rear Drag Link End
SKU: C7NN3307B
16 in stock

C7NN3304C - Drag Link
SKU: C7NN3304C
8 in stock

C7NN3289E - Outer (RH) Tie Rod
SKU: C7NN3289E
16 in stock

C7NN3289D - Inner (RH) Tie Rod
SKU: C7NN3289D
16 in stock

C7NN3281A - Long (LH) Tie Rod
SKU: C7NN3281A
Out of stock

C7NN3280F - Outer (LH) Tie Rod
SKU: C7NN3280F
18 in stock








