Ford New Holland 4600 Tractor Parts

4600 parts and accessories

The Ford New Holland 4600, manufactured from 1975 to 1981, was a popular utility tractor known for its reliability and versatility. Powered by a robust 52 HP engine, the 4600 delivered approximately 45 PTO horsepower, making it well-suited for a variety of farm tasks. Its straightforward design and dependable performance made it a favorite among farmers for decades.

The Ford New Holland 4600 was introduced in 1975 as part of Ford's updated tractor lineup, replacing earlier models and offering improvements in comfort and performance. Production continued until 1981. The tractor was equipped with either a Ford 3.3L (201 cubic inch) 3-cylinder diesel engine producing around 52 horsepower or a 3.0L (183 cubic inch) 3-cylinder gasoline engine, also rated at approximately 52 horsepower. The diesel variant proved more popular due to its fuel efficiency and torque. The engine displacement varied based on the specific engine configuration. Transmission options included a 6-speed or an 8-speed manual transmission, both of which offered a good range of speeds for various field operations. The 4600's PTO horsepower was rated at approximately 45 HP at 540 RPM. The hydraulic system had a capacity of around 8 GPM, typically powering two rear remotes. It featured a Category II 3-point hitch, providing a lift capacity of approximately 3100 lbs. Farmers used the 4600 for various tasks, including row crop work, hay baling, livestock feeding, and light tillage. The 4600 distinguished itself with a good balance of power, simplicity, and affordability within Ford's utility tractor offerings.

Specifications

Engine	Ford 3.3L Diesel 52 HP or Ford 3.0L Gas 52 HP
PTO HP	45 HP @ 540 RPM
Transmission	6-speed or 8-speed manual
Hydraulics	8 GPM, 2 remotes
3-Point Hitch	Category II, 3100 lbs
Fuel Capacity	17 gallons
Weight	5200 lbs
Years Produced	1975-1981

Maintenance Tips

Change engine oil and filter every 150-200 hours of operation, using a high-quality oil appropriate for the engine type (diesel or gasoline).
Regularly inspect hydraulic fluid levels and check for leaks. Replace hydraulic filters per the manufacturer's recommendations to maintain optimal hydraulic performance.
Keep the fuel system clean by using fuel additives and draining the fuel sediment bowl regularly, especially if using low-quality fuel.
Before seasonal storage, drain fluids or add fuel stabilizer, disconnect the battery, and store the tractor in a dry, sheltered location.

History & Background

The Ford New Holland 4600 was a significant upgrade over its predecessors in the Ford tractor lineup, providing increased horsepower and improved operator comfort. It was introduced in 1975 and remained largely unchanged throughout its production run, solidifying its place as a reliable and cost-effective utility tractor in agricultural history. Its enduring popularity is a testament to its practical design and durable construction.

Frequently Asked Questions

What engine is in the Ford New Holland 4600?

The Ford New Holland 4600 came with either a Ford 3.3L (201 cubic inch) 3-cylinder diesel engine or a Ford 3.0L (183 cubic inch) 3-cylinder gasoline engine, both rated at approximately 52 horsepower.

What is the PTO horsepower on a 4600?

The PTO horsepower on a Ford New Holland 4600 is approximately 45 HP at 540 RPM.

What oil filter fits the 4600?

Common oil filter cross-references for the Ford New Holland 4600 include Fram PH3600, Wix 51215, and Motorcraft FL1A. Always verify compatibility with your specific engine type.

What are common parts needed for the 4600?

Commonly needed parts for the Ford New Holland 4600 include engine oil filters, fuel filters, air filters, hydraulic filters, fan belts, hydraulic cylinder seals, steering components (tie rod ends), clutch discs and pressure plates.

Showing 1-24 of 994 products

Sort by: