Case IH 315 Combine Parts
Browse Case IH 315 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The Case IH 315 combine, produced from approximately 1985 to 1990, offered farmers a reliable and efficient grain harvesting solution. Powered by an engine pushing around 165 HP, it was known for its robust conventional separator and ability to handle various crops. Header widths ranged from 13 to 20 feet, making it a versatile choice for small to medium-sized farms.
About the 315
The Case IH 315 combine harvester, manufactured between 1985 and 1990 (approximate dates, verify with reliable sources), was a popular machine during its production run. It featured an engine, likely a Case IH diesel engine, producing around 165 horsepower with a displacement around 359 cubic inches. The 315 utilized a conventional separator system with a cylinder width around 40 inches and featured multiple walker rows for grain separation. Grain tank capacity was approximately 170 bushels, offering decent capacity for its era. The unloading auger provided an unloading rate around 60 bushels per minute. Available header widths typically ranged from 13 to 20 feet, allowing for adaptability to different field sizes and crop conditions. Chopper and spreader options varied, with some models equipped with a straw chopper or spreader for residue management. The cab offered basic operator comfort with controls and monitoring systems typical for the time. The Case IH 315 excelled at harvesting grains like wheat, soybeans, and corn, making it a solid performer in diverse agricultural operations.
315 Specifications
| Engine | Case IH 165 HP 359 cu. in. Diesel |
|---|---|
| Separator Type | Conventional - 40 inch Cylinder |
| Grain Tank | 170 bushels |
| Unloading Rate | 60 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | Approx. 80 gallons |
| Weight | Approx. 15,000 lbs |
| Years Produced | 1985-1990 (Approx.) |
315 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust concave clearance based on crop type and moisture content to optimize threshing performance and minimize grain damage.
- Belt and Chain Tension: Check and adjust belt and chain tension frequently to prevent slippage, wear, and potential breakdowns during harvest.
- Sieve and Chaffer Cleaning: Clean sieves and chaffers daily to remove debris and ensure proper airflow for effective grain separation and reduced losses.
- Bearing Greasing: Regularly grease all bearings according to the manufacturer's recommendations to prevent premature wear and extend component lifespan.
315 History & Background
The Case IH 315 combine was introduced in the mid-1980s as part of Case IH's effort to offer a robust and dependable conventional combine option. While not revolutionary in its design, it represented a solid and well-engineered machine that proved popular with farmers seeking reliability and ease of maintenance. It played a significant role in grain harvesting during its production years.
Frequently Asked Questions
Which primary reel drive belt fits the Case IH 315 combine?
The recommended primary reel drive belt for the Case IH 315 combine is the 824202C1 - Belt, Primary Reel Drive.
Which grain tank auger bearing is suitable for the Case IH 315?
For the grain tank and delivery auger on your Case IH 315, we recommend the 204807C91 - Bearing, Grain Tank / Delivery Auger.
What type of forged guard fits the Case IH 315 combine header?
The 633098R1 - Forged Guard, 2 Prong is designed to fit the header of the Case IH 315 combine.
What are common parts needed for the 315?
For the Case IH 315, common wear items include chain components like the CL50 - 50 Connector Link (Drives), various bearings such as the LM67048-P - Cone, Tapered Roller Bearing and the G1100KRRB-I - Bearing, Ball; Spherical W/ Collar, Re-Lubricatable. Other frequently replaced parts include header components like the 411-091 - Black 11ga Top Serrated sickle section, 167651C1 - Finger (RH), and 87019792 - Washer, Knife Bolt.

169293C11 - Steering Axle Hub
SKU: 169293C11
28 in stock

651818R91 - BEARING
SKU: 651818R91
457 in stock

376461R2 - Final Drive Pinion Shaft
SKU: 376461R2
5 in stock

651814R1 - Outer Cup
SKU: 651814R1
330 in stock

36725 - Outer Cup
SKU: 36725
330 in stock

BC108 - Bearing (Import) Collar
SKU: BC108
90 in stock

BC102 - Bearing (Import) Collar
SKU: BC102
61 in stock

BC100 - Bearing (Import) Collar
SKU: BC100
392 in stock

167269 - O-Ring
SKU: 167269
9 in stock

128825 - O-Ring
SKU: 128825
2750 in stock

F78573 - 50 IDLER SPROCKET 17T 1/2
SKU: F78573
162 in stock

C144 - Classical V-Belt (7/8" X 148")
SKU: C144
Out of stock

BB155 - Double V-Belt (5/8" X 158")
SKU: BB155
51 in stock

B136 - Classical V-Belt (5/8" X 139")
SKU: B136
147 in stock

824202C1 - Primary Reel Drive Belt
SKU: 824202C1
689 in stock

674965R1 - Tailings Elev Drive Belt
SKU: 674965R1
30 in stock

153301C1 - Reel Drive Belt
SKU: 153301C1
235 in stock

RA101RRB-I - Non-Relubricatable Ball; Spherical W/ Collar Bearing
SKU: RA101RRB-I
31 in stock

RA101RR-I - Non-Relubricatable Ball; Cylindrical W/ Collar Bearing
SKU: RA101RR-I
16 in stock

LM67048-P - Tapered Roller Bearing Cone
SKU: LM67048-P
715 in stock

LM67048-I - Tapered Roller Bearing Cone
SKU: LM67048-I
457 in stock

LM67010-P - Tapered Bearing Cup
SKU: LM67010-P
907 in stock

LM67010-I - Tapered Bearing Cup
SKU: LM67010-I
1029 in stock

LM48548-P - Tapered Roller Bearing Cone
SKU: LM48548-P
156 in stock








