Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Case IH 1420 Combine Parts

Shop Case IH 1420 Combine parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.

The Case IH 1420 combine, manufactured from 1978 to 1985, was a popular choice for farmers seeking a reliable and affordable harvesting solution. Powered by a 105 HP engine, the 1420 was available with header widths up to 15 feet, making it suitable for small to medium-sized farms. Its conventional separator system delivered efficient grain separation in a variety of crops.

About the 1420

Introduced in 1978, the Case IH 1420 aimed to provide a compact and efficient harvesting solution for smaller farms. Production continued until 1985. The 1420 is powered by an International Harvester DT-358 105 HP, 358 cubic inch (5.9L) diesel engine. It utilizes a conventional threshing system featuring a 30-inch wide cylinder. The grain tank holds approximately 95 bushels, and it boasts an unloading auger capable of moving grain at roughly 50 bushels per minute. Available header widths ranged from 13 to 15 feet, accommodating various row spacing. Options included a straw chopper or spreader for residue management. The cab offered basic operator comfort and controls, a significant improvement over open-station models of the era. While versatile, the 1420 excelled at harvesting small grains like wheat and soybeans due to its efficient conventional separator design.

1420 Specifications

EngineInternational Harvester DT-358 105 HP 358 cu in Diesel
Separator TypeConventional - 30" Cylinder Width
Grain Tank95 bushels
Unloading Rate50 bu/min
Header Widths13-15 ft
Fuel Capacity38 gallons
Weight8,300 lbs
Years Produced1978-1985

1420 Maintenance Tips

  • Concave Adjustment: Regularly check and adjust concave clearance to ensure optimal threshing and minimize grain loss. Refer to the operator's manual for specific settings for different crops.
  • Belt and Chain Tension: Inspect all belts and chains for wear and proper tension. Loose belts and chains can cause slippage and damage components.
  • Sieve and Chaffer Cleaning: Regularly clean the sieves and chaffers to remove debris and ensure efficient grain cleaning. Clogged sieves can lead to increased grain loss.
  • Bearing Greasing: Grease all bearings according to the recommended schedule in the operator's manual. Proper lubrication is crucial for extending bearing life and preventing premature failure.

1420 History & Background

The Case IH 1420 was introduced in 1978 as part of the Case IH lineup, aiming to provide a smaller, more affordable combine option. While not receiving any major redesigns during its production run, it remained a popular model due to its simplicity and reliability. The 1420 played a significant role in making combine harvesting accessible to a wider range of farmers.

Frequently Asked Questions

Which rotor bar fits the Case IH 1420 combine?

For the Case IH 1420 combine, a compatible replacement rotor bar is the 1309336C2 - Rotor Bar, w/o Spike.

What bearing assembly is used in the feeder conveyor of a Case IH 1420?

The 179665C91 - Bearing Assy, Feeder Conveyor/ Rock Trap Beater is a suitable replacement for the feeder conveyor and rock trap beater on the Case IH 1420.

What type of washer is used for knife bolts on the Case IH 1420?

A common washer for knife bolts on the Case IH 1420 combine is the 87019792 - Washer, Knife Bolt.

What are some common replacement parts for the Case IH 1420 combine?

Showing 1-24 of 371 products