Case IH 1680 Combine Parts
Replacement parts for the Case IH 1680 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Case IH 1680 combine, manufactured from 1986 to 1993, quickly gained popularity for its robust performance and efficient harvesting capabilities. Powered by a 210 HP engine, the 1680 offered header widths up to 30 feet, making it suitable for various field sizes. Its advanced rotary separator delivered impressive grain quality and throughput, setting a new standard for combines of its era.
About the 1680
The Case IH 1680 was a flagship rotary combine produced from 1986 to 1993, succeeding the 1480 series. Under the hood, it featured an International Harvester DT-466 210 HP turbocharged diesel engine with a displacement of 466 cubic inches. A key feature was its axial-flow rotary separator, characterized by a 30-inch diameter rotor for efficient threshing and separation. The grain tank boasted a capacity of 215 bushels, and it unloaded grain at a rate of 2.3 bushels per second (approximately 138 bu/min). Available header widths ranged from 13 to 30 feet, accommodating diverse harvesting needs. Chopper and spreader options were available to manage residue effectively. The cab was designed with improved operator comfort and controls for enhanced productivity. The 1680 excelled in harvesting a variety of crops including wheat, corn, soybeans, and other small grains, providing high capacity and minimal grain loss.
1680 Specifications
| Engine | International Harvester DT-466 210 HP 466 cu. in. Diesel |
|---|---|
| Separator Type | Axial-Flow Rotary - 30" diameter rotor |
| Grain Tank | 215 bushels |
| Unloading Rate | 138 bu/min |
| Header Widths | 13-30 ft |
| Fuel Capacity | 100 gallons |
| Weight | Approx. 23,000 lbs |
| Years Produced | 1986-1993 |
1680 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust concave clearance based on crop type and conditions to optimize threshing and minimize grain damage.
- Belt and Chain Tension: Check and maintain proper tension on all belts and chains to ensure efficient power transmission and prevent premature wear.
- Sieve and Chaffer Cleaning: Clean sieves and chaffers frequently to remove debris and maintain optimal airflow for efficient grain cleaning.
- Bearing Greasing: Grease all bearings regularly according to the manufacturer's recommendations to prevent failure and extend component life. Prior to each season, ensure that all lubrication points are serviced.
1680 History & Background
Introduced in 1986, the Case IH 1680 represented a significant advancement in rotary combine technology. It built upon the success of the earlier 1400 series, offering increased power and capacity. The 1680 helped solidify Case IH's position as a leader in the combine harvester market.
Frequently Asked Questions
Which rotor bar is suitable for the Case IH 1680 combine?
The 1309336C2 - Rotor Bar, w/o Spike is a suitable replacement for the Case IH 1680 combine.
What bearing is used for the grain tank or delivery auger on the 1680?
The 204807C91 - Bearing, Grain Tank / Delivery Auger is compatible with the Case IH 1680 combine.
Which bushing is used for the shaker shaft or chaffer drive arm on the Case IH 1680?
For the Case IH 1680, the 87376924 - Bushing, Shaker Shaft / Chaffer Drive Arm is an appropriate replacement part.
What are common replacement parts for the Case IH 1680 combine?
Common replacement parts for the Case IH 1680 combine include the 278821A2 - Rotor Bar, w/o Spike, the 1200-90 - Rotor Bar Hardware Kit, Standard Bolts and Nuts, 87283349 - Link, Connecting; A557 Chain, 195293C91 - Bearing, Auger Bed & Straw Spreader, and the LF3316 - Filter, Lube, Full-Flow Spin-On.

VTK241 - Valve Train Kit
SKU: VTK241
7 in stock

SW462 - Cylinder Liner
SKU: SW462
15 in stock

9512162 - King Pin (Bronze) Bushing
SKU: 9512162
36 in stock

87337229 - Steering Cylinder Assy
SKU: 87337229
5 in stock

87012417 - Tie Rod; Inner Tube
SKU: 87012417
Out of stock

359774A1 - Tie Rod (LH)
SKU: 359774A1
7 in stock

316945A1 - Steering Cyl Support
SKU: 316945A1
8 in stock

1970143C1 - King Pin
SKU: 1970143C1
9 in stock

1968998C1 - Tie Rod End Assembly
SKU: 1968998C1
17 in stock

186680C1 - Spindle Bushing
SKU: 186680C1
14 in stock

186140C91 - Steering Cylinder End
SKU: 186140C91
20 in stock

186052C1 - Steering Knuckle King Pin
SKU: 186052C1
4 in stock

182795C1 - Steering Axle Support Bushing
SKU: 182795C1
34 in stock

182794C1 - Pivot; Rear Axle Bushing
SKU: 182794C1
169 in stock

177751C1 - Axle Pivot Bushing
SKU: 177751C1
9 in stock

169293C11 - Steering Axle Hub
SKU: 169293C11
28 in stock

168385C2 - Axle Pivot Washer
SKU: 168385C2
103 in stock

663557R1 - Bearing (LM501349)
SKU: 663557R1
258 in stock

530700R1 - 2nd & 3rd Sliding Gear
SKU: 530700R1
2 in stock

530699R1 - Differential Spool Gear
SKU: 530699R1
9 in stock

401889R1 - 1st - Sliding Gear
SKU: 401889R1
11 in stock

1980169C1 - Hydro. Input Shaft Assy.
SKU: 1980169C1
30 in stock

1980136C1 - Output for EATON Hydro Shaft
SKU: 1980136C1
21 in stock

184341C2 - Axle Drive Shaft Coupling
SKU: 184341C2
74 in stock








