Case IH 1670 Combine Parts
Browse Case IH 1670 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The Case IH 1670 combine, produced from 1987 to 1992, was a popular choice for farmers due to its reliable performance and efficient harvesting capabilities. Powered by a robust diesel engine producing around 215 horsepower, the 1670 was offered with header widths ranging from 15 to 30 feet. This combine utilizes a conventional threshing and separating system, making it well-suited for various grain crops.
About the 1670
The Case IH 1670 combine was introduced in 1987 as part of the updated 1600 series, replacing earlier models and building upon their reputation for dependable grain harvesting. Production continued through 1992. The 1670 is powered by an International Harvester DT-402 6.6L (402 cu in) diesel engine rated at approximately 215 horsepower. This engine provides ample power for threshing and separating various grain crops. The combine features a conventional threshing system with a 30.5-inch wide cylinder, allowing for efficient grain separation. The grain tank holds approximately 215 bushels, and unloading is achieved with a high-capacity unloading auger, moving grain at a rate of 75 bushels per minute. Available header widths ranged from 15 to 30 feet to accommodate different field conditions and crop types. Options included straw choppers and spreaders for residue management. The cab featured improved operator comfort and controls compared to earlier models. The Case IH 1670 excels at harvesting wheat, soybeans, corn, and other small grains.
1670 Specifications
| Engine | International Harvester DT-402 215 HP Diesel |
|---|---|
| Separator Type | Conventional - 30.5 inch cylinder width |
| Grain Tank | 215 bushels |
| Unloading Rate | 75 bu/min |
| Header Widths | 15-30 ft |
| Fuel Capacity | 85 gallons |
| Weight | Approx. 19,000 lbs |
| Years Produced | 1987-1992 |
1670 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance to ensure optimal threshing performance and minimize grain loss. Refer to the operator's manual for specific settings based on the crop being harvested.
- Belt and Chain Tension: Maintain proper tension on all belts and chains to prevent slippage, wear, and potential breakdowns. Regularly inspect for wear and replace as needed.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer frequently to remove debris and ensure efficient grain separation. Clogged sieves can lead to increased grain loss and reduced harvesting efficiency.
- Bearing Greasing: Grease all bearings regularly according to the manufacturer's recommendations. Proper lubrication is essential for preventing premature wear and extending the lifespan of bearings.
1670 History & Background
The Case IH 1670 was introduced in 1987 as an upgrade to the previous 1400 series combines. It represented a refinement of Case IH's conventional threshing technology. The 1670 was a popular and reliable combine during its production run, contributing to Case IH's strong position in the agricultural equipment market.
Frequently Asked Questions
Which water pump fits the Case IH 1670 combine?
The recommended water pump for the Case IH 1670 combine is the 673162C1 - WATER PUMP.
What bearing is used for the grain tank delivery auger on the Case IH 1670?
For the grain tank delivery auger on your Case IH 1670, the 204807C91 - Bearing, Grain Tank / Delivery Auger is recommended.
What replacement rotor bar is recommended for the Case IH 1670?
For the Case IH 1670, the 1309336C2 - Rotor Bar, w/o Spike is a recommended replacement part.
What are common parts needed for the 1670?
Common wear parts for the Case IH 1670 include filters like the LF3316 - Filter, Lube, Full-Flow Spin-On (QTY 12), FF5019 - Filter, Fuel, Spin-On (QTY 12), and WF2071 - Filter, Water, Spin-On (QTY 12). Other frequently replaced items include the 118270A1 - Slat, Feeder House; Serrated, the 87376924 - Bushing, Shaker Shaft / Chaffer Drive Arm, and the 1200-90 - Rotor Bar Hardware Kit, Standard Bolts and Nuts.

548247R91 - w/o Power Guide Axle Steering Hydraulic Cylinder
SKU: 548247R91
8 in stock

177751C1 - Axle Pivot Bushing
SKU: 177751C1
9 in stock

168385C2 - Axle Pivot Washer
SKU: 168385C2
103 in stock

530700R1 - 2nd & 3rd Sliding Gear
SKU: 530700R1
2 in stock

530699R1 - Differential Spool Gear
SKU: 530699R1
9 in stock

402725R2 - RH Axle Drive Shaft
SKU: 402725R2
5 in stock

401889R1 - 1st - Sliding Gear
SKU: 401889R1
11 in stock

1980169C1 - Hydro. Input Shaft Assy.
SKU: 1980169C1
30 in stock

184341C2 - Axle Drive Shaft Coupling
SKU: 184341C2
74 in stock

1309012C1 - LH Axle Drive Shaft
SKU: 1309012C1
2 in stock

87629602 - Feeder Jackshaft Drive Belt
SKU: 87629602
Out of stock

87476487 - RH Elevator Drive / Main Belt
SKU: 87476487
Out of stock

87476486 - RH Drive w/ Chopper / Elevator Drive Main Belt
SKU: 87476486
21 in stock

244420A4 - Rotor Belt Belt
SKU: 244420A4
4 in stock

1315265C1 - Straw Chopper Drive Belt
SKU: 1315265C1
21 in stock

618023R91 - Cone Bearing
SKU: 618023R91
794 in stock

611583R1 - BEARING
SKU: 611583R1
58 in stock

WL6482R - Hi / Low RH LED Headlight
SKU: WL6482R
207 in stock

D71346 - Bulb
SKU: D71346
497 in stock

87703630 - Amber LED Flasher/Tail Light Lamp
SKU: 87703630
88 in stock

87271837 - Flasher Control Switch
SKU: 87271837
390 in stock

529068 - Bulb
SKU: 529068
115 in stock

1157L24 - Replaces Bulb #1157 (2 Pack) 2400 Lumens LED Bulb
SKU: 1157L24
121 in stock

1156L24 - Replaces Bulb #1156 (2 Pack) 2400 Lumens LED Bulb
SKU: 1156L24
56 in stock








