Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Case IH 1480 Combine Parts

Case IH 1480 Combine parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.

The Case IH 1480 combine, manufactured from 1977 to 1986, was a powerhouse on the farm, boasting engines up to 210 horsepower. Known for its innovative Axial-Flow rotary design, it provided superior grain quality and reduced grain loss. Available header widths ranged up to 30 feet, making the 1480 a popular choice for farmers seeking high-capacity harvesting.

About the 1480

Introduced in 1977, the Case IH 1480 became a cornerstone of the Axial-Flow combine series and was produced through 1986. It marked a significant advancement in harvesting technology. Powering the 1480 was a reliable Case IH diesel engine, offering up to 210 horsepower with a displacement of approximately 451 cubic inches. Its Axial-Flow rotary separator, featuring a single rotor, delivered cleaner grain samples and reduced damage compared to traditional cylinder combines. The grain tank held around 225 bushels, and it could be unloaded quickly with an unloading rate of up to 100 bushels per minute. Header width options ranged from 13 to 30 feet, accommodating various crop types and field sizes. Options included a chopper/spreader for residue management. The cab provided improved operator comfort and visibility. The 1480 excelled in harvesting a variety of crops, including wheat, corn, soybeans, and other small grains. Farmers valued its high capacity, durability, and ability to handle tough harvesting conditions.

1480 Specifications

EngineCase IH 210 HP 451 cu. in. Diesel
Separator TypeAxial-Flow Rotary - Single Rotor
Grain Tank225 bushels
Unloading Rate100 bu/min
Header Widths13-30 ft
Fuel Capacity110 gallons
Weight22,000 lbs
Years Produced1977-1986

1480 Maintenance Tips

  • Regularly inspect and adjust the concave clearance to optimize threshing performance and minimize grain damage.
  • Maintain proper belt and chain tension to ensure smooth operation and prevent premature wear.
  • Clean sieves and chaffers frequently to remove debris and maintain optimal airflow for clean grain separation.
  • Grease bearings and lubrication points regularly according to the manufacturer's recommendations to prevent wear and extend component life.
  • Before each harvest season, thoroughly inspect all components, replace worn parts, and perform necessary maintenance to ensure reliable operation.

1480 History & Background

The Case IH 1480 was introduced in 1977 as part of the Axial-Flow series, representing a shift towards rotary combine technology. While there were no major redesigns, improvements were made to components and features throughout its production run. The 1480 played a significant role in popularizing rotary combines and improving harvesting efficiency for farmers.

Frequently Asked Questions

Which valve keepers are recommended for the Case IH 1480?

For optimal engine performance in your Case IH 1480, consider replacing worn valve keepers with 41339D - Keeper, Valve.

Which bearing is used for the grain tank delivery auger on the Case IH 1480?

The grain tank delivery auger on the Case IH 1480 typically uses the 204807C91 - Bearing, Grain Tank / Delivery Auger.

What replacement rotor bar is suitable for the Case IH 1480?

A suitable replacement rotor bar for the Axial-Flow separator in your Case IH 1480 is the 1309336C2 - Rotor Bar, w/o Spike.

What are common parts needed for the 1480?

Showing 1-24 of 546 products
VTK241 - Valve Train Kit

VTK241 - Valve Train Kit

SKU: VTK241

$356.43

7 in stock

SW462 - Cylinder Liner

SW462 - Cylinder Liner

SKU: SW462

$113.92

15 in stock

87337229 - Steering Cylinder Assy

87337229 - Steering Cylinder Assy

SKU: 87337229

$350.65

5 in stock

548247R91 - w/o Power Guide Axle Steering Hydraulic Cylinder

548247R91 - w/o Power Guide Axle Steering Hydraulic Cylinder

SKU: 548247R91

$603.76

8 in stock

359774A1 - Tie Rod (LH)

359774A1 - Tie Rod (LH)

SKU: 359774A1

$157.46

7 in stock

316945A1 - Steering Cyl Support

316945A1 - Steering Cyl Support

SKU: 316945A1

$208.43

8 in stock

186680C1 - Spindle Bushing

186680C1 - Spindle Bushing

SKU: 186680C1

$29.86

14 in stock

186140C91 - Steering Cylinder End

186140C91 - Steering Cylinder End

SKU: 186140C91

$75.50

20 in stock

186052C1 - Steering Knuckle King Pin

186052C1 - Steering Knuckle King Pin

SKU: 186052C1

$157.21

4 in stock

182795C1 - Steering Axle Support Bushing

182795C1 - Steering Axle Support Bushing

SKU: 182795C1

$62.89

34 in stock

182794C1 - Pivot; Rear Axle Bushing

182794C1 - Pivot; Rear Axle Bushing

SKU: 182794C1

$30.31

169 in stock

177751C1 - Axle Pivot Bushing

177751C1 - Axle Pivot Bushing

SKU: 177751C1

$41.28

9 in stock

169293C11 - Steering Axle Hub

169293C11 - Steering Axle Hub

SKU: 169293C11

$207.71

28 in stock

168385C2 - Axle Pivot Washer

168385C2 - Axle Pivot Washer

SKU: 168385C2

$10.43

103 in stock

663557R1 - Bearing (LM501349)

663557R1 - Bearing (LM501349)

SKU: 663557R1

$9.69

258 in stock

530700R1 - 2nd & 3rd Sliding Gear

530700R1 - 2nd & 3rd Sliding Gear

SKU: 530700R1

$360.35

2 in stock

530699R1 - Differential Spool Gear

530699R1 - Differential Spool Gear

SKU: 530699R1

$749.83

9 in stock

401889R1 - 1st - Sliding Gear

401889R1 - 1st - Sliding Gear

SKU: 401889R1

$484.35

11 in stock

1980136C1 - Output for EATON Hydro Shaft

1980136C1 - Output for EATON Hydro Shaft

SKU: 1980136C1

$398.21

21 in stock

184341C2 - Axle Drive Shaft Coupling

184341C2 - Axle Drive Shaft Coupling

SKU: 184341C2

$54.10

74 in stock

184189C1 - Axle Drive Shaft

184189C1 - Axle Drive Shaft

SKU: 184189C1

$273.08

13 in stock

130884C1 - Final Drive Pinion Shaft

130884C1 - Final Drive Pinion Shaft

SKU: 130884C1

$495.38

12 in stock

A44762 - Short Tie Rod End (RH Thread)
Out of Stock

A44762 - Short Tie Rod End (RH Thread)

SKU: A44762

$27.99

Out of stock

A145857 - Tie Rod Wedge

A145857 - Tie Rod Wedge

SKU: A145857

$4.78

27 in stock