Massey Ferguson 92-SUPER Combine Parts
92 SUPER parts and accessories
The Massey Ferguson 92 SUPER combine, produced in the late 1960s and early 1970s, was a workhorse on many farms. Typically powered by a diesel engine around 105-115 HP, it offered header widths suitable for a variety of field sizes. Its conventional separator design, combined with reliability, made it a popular choice for harvesting wheat, soybeans, and corn.
The Massey Ferguson 92 SUPER was introduced as an upgrade to previous models, solidifying Massey Ferguson's presence in the combine market. Production spanned the late 1960s and early 1970s. Powering this combine was typically a Perkins 354 cubic inch diesel engine, delivering approximately 105-115 horsepower. It featured a conventional threshing system using a cylinder and concave to separate grain from the plant material. The grain tank capacity held roughly 75-85 bushels, and the unloading auger could empty the tank at a rate of around 25-35 bushels per minute. Available header widths ranged from 13 to 15 feet. Options included a straw chopper or spreader, depending on the farmer's preference for residue management. While not boasting advanced cab features, the 92 SUPER offered a functional operator environment. It was particularly well-suited for harvesting wheat, soybeans, and corn in smaller to medium-sized fields.
Specifications
| Engine | Perkins 354 Diesel |
|---|---|
| Separator Type | Conventional - Cylinder and Concave |
| Grain Tank | 75-85 bushels |
| Unloading Rate | 25-35 bu/min |
| Header Widths | 13-15 ft |
| Fuel Capacity | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1960s-Early 1970s |
Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance to ensure efficient threshing and minimize grain damage.
- Belt and Chain Tension: Maintain proper tension on all belts and chains to prevent slippage and premature wear. Replace worn belts and chains promptly.
- Sieve and Chaffer Cleaning: Clean sieves and chaffers frequently to prevent plugging and ensure proper grain separation.
- Bearing Greasing: Grease all bearings regularly according to the manufacturer's recommendations to prevent bearing failure.
History & Background
The Massey Ferguson 92 SUPER was a refinement of earlier Massey Ferguson combine designs. While it lacked the technological advancements of later models, its robust construction and straightforward operation made it a dependable machine for many farmers. It represents a key step in the evolution of Massey Ferguson's combine harvester line.
Frequently Asked Questions
What engine is in the Massey Ferguson 92 SUPER?
The Massey Ferguson 92 SUPER is typically equipped with a Perkins 354 cubic inch diesel engine, producing around 105-115 horsepower.
What is the grain tank capacity on a 92 SUPER?
The grain tank capacity on the Massey Ferguson 92 SUPER is approximately 75-85 bushels, and the unloading rate is around 25-35 bushels per minute.
What type of separator does the 92 SUPER have?
The Massey Ferguson 92 SUPER uses a conventional threshing system, employing a cylinder and concave to separate the grain from the plant material.
What are common parts needed for the 92 SUPER?
Common wear parts for the Massey Ferguson 92 SUPER include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections.

196099M1 - Tie Rod Dust Boot
SKU: 196099M1
487 in stock

182534M91 - Drag Link End
SKU: 182534M91
60 in stock

472015-P - Seal
SKU: 472015-P
25 in stock

472015-I - Seal
SKU: 472015-I
103 in stock

B57 - Classical V-Belt (5/8" X 60")
SKU: B57
700 in stock

B32 - Classical V-Belt (5/8" X 35")
SKU: B32
270 in stock

832339M1 - Roller Type
SKU: 832339M1
5 in stock

831822M1 - Ball Type
SKU: 831822M1
61 in stock

831729M1 - Tapered Cup
SKU: 831729M1
240 in stock

831728M1 - Tapered Roller
SKU: 831728M1
359 in stock

831224M1 - Needle Type
SKU: 831224M1
Out of stock

831112M1 - Ball Type
SKU: 831112M1
55 in stock

831087M1 - Ball Type
SKU: 831087M1
4 in stock

831078M1 - Outer Pinion/Rear Wheel Brg
SKU: 831078M1
26 in stock

831077M1 - Outer Pinion/Rear Wheel Cup
SKU: 831077M1
389 in stock

354921X1 - Ball Type
SKU: 354921X1
86 in stock

354353X1 - BALL BEARING
SKU: 354353X1
2 in stock

353161X1 - Elevator Drive Shaft Bearing
SKU: 353161X1
168 in stock

353152X1 - Ball Type
SKU: 353152X1
35 in stock

353140X1 - Ball Type
SKU: 353140X1
448 in stock

350356X1 - Rear Wheel Inner Cup
SKU: 350356X1
43 in stock

711-056 - Pack of 2 6" Wear Plate
SKU: 711-056
199 in stock

665930M1 - Baler Tooth
SKU: 665930M1
80 in stock

350358X1 - Front PTO Shaft Ball Bearing
SKU: 350358X1
67 in stock
