Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Massey Ferguson 410 Combine Parts

Replacement parts for the Massey Ferguson 410 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.

The Massey Ferguson 410 combine, produced from 1980-1985, was a popular choice for farmers seeking a reliable and efficient grain harvesting solution. Powered by a Perkins diesel engine pushing around 105 HP, the MF 410 offered header widths up to 15 feet. Known for its conventional separator design, this combine provided a cost-effective and durable option for smaller to medium-sized farms.

About the 410

The Massey Ferguson 410 combine was introduced in 1980 as part of the 400 series, offering a balance of performance and affordability. Production continued until 1985. Under the hood, the MF 410 was powered by a Perkins 6.247 naturally aspirated diesel engine, delivering approximately 105 horsepower with a displacement of 247 cubic inches. This combine utilized a conventional threshing system with a 42-inch wide cylinder. Grain tank capacity was about 115 bushels, and the unloading auger speed could discharge grain at a rate of approximately 25 bushels per minute. Header widths ranged from 13 to 15 feet, accommodating various field sizes and crop conditions. Options included a straw chopper or spreader for residue management. The cab offered basic controls and operator comfort for its time. The MF 410 excelled at harvesting small grains like wheat and soybeans, thanks to its simple and effective threshing system. It was considered a good all-around combine for smaller operations.

410 Specifications

EnginePerkins 6.247 105 HP 247 cu in Diesel
Separator TypeConventional - 42-inch Cylinder width
Grain Tank115 bushels
Unloading Rate25 bu/min
Header Widths13-15 ft
Fuel Capacity45 gallons
Weight9,500 lbs
Years Produced1980-1985

410 Maintenance Tips

  • Concave Adjustment: Regularly check and adjust concave clearance to ensure optimal threshing performance and minimize grain loss. Refer to the operator's manual for recommended settings based on crop type and condition.
  • Belt and Chain Tension: Inspect and maintain proper tension on all belts and chains. Loose belts or chains can slip, causing reduced efficiency and premature wear.
  • Sieve and Chaffer Cleaning: Regularly clean sieves and chaffers to prevent buildup of debris, which can impede airflow and lead to grain loss. Consider using compressed air for thorough cleaning.
  • Bearing Greasing: Lubricate all bearings according to the manufacturer's recommendations. Proper greasing helps prevent premature bearing failure and ensures smooth operation.

410 History & Background

The Massey Ferguson 410 was introduced in 1980 as a mid-range combine in their lineup, aimed at smaller to medium-sized farms. It represented a continuation of Massey Ferguson's commitment to providing reliable and affordable harvesting solutions. The MF 410 filled a crucial gap in the market, offering a balance of features and cost-effectiveness that appealed to a broad range of farmers.

Frequently Asked Questions

Which fuel filter is suitable for the Massey Ferguson 410 combine?

The 1049939M1 - Filter, Diesel Fuel is a suitable replacement for the Massey Ferguson 410.

What replacement bearing is recommended for the elevator shaft on a Massey Ferguson 410?

For the elevator shaft, the 834199M1 - Bearing, Elevator Shaft is an appropriate replacement.

Which forged guard is compatible with the Massey Ferguson 410 combine?

The 228392M2 - Forged Guard, 2 Prong is designed to fit the Massey Ferguson 410.

What are common parts needed for the 410?

Regularly needed parts for the Massey Ferguson 410 combine include wear plates such as the 711-056 - 6" Wear Plate, Pack of 2, drive belts like the B112 - Classical V-Belt (5/8" X 115"), 412-003 - Plated 14ga Top Serrated for cutting assemblies, 354370X1 - Inner Cone components, and 836998M91 - Guide; Finger.

Showing 1-24 of 166 products