Massey Ferguson 540 Combine Parts
Browse Massey Ferguson 540 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The Massey Ferguson 540 combine, manufactured from the late 1970s through the early 1980s, was a popular choice for farmers seeking a reliable and efficient grain harvesting solution. Offering approximately 105 horsepower and available with header widths ranging from 13 to 18 feet, this combine features a conventional cylinder separator. Its affordability and ease of maintenance contributed to its widespread adoption for harvesting wheat, soybeans, and corn.
About the 540
The Massey Ferguson 540 combine was a staple in many fields from its introduction in the late 1970s until its discontinuation in the early 1980s. It was powered by a Perkins 6.247 diesel engine, delivering around 105 horsepower with a displacement of 247 cubic inches. The 540 employs a conventional threshing system featuring a robust cylinder and concave design, known for its effectiveness in a variety of crops. It has a grain tank capacity of approximately 85 bushels and an unloading rate of around 30 bushels per minute. Header width options ranged from 13 to 18 feet, allowing farmers to tailor the machine to their field sizes and crop types. Depending on the configuration, the 540 could be equipped with a straw chopper or spreader for residue management. The cab, while not as luxurious as later models, provided a comfortable and functional operating environment. The Massey Ferguson 540 proved to be a versatile combine, capable of efficiently harvesting wheat, soybeans, corn, and other small grains.
540 Specifications
| Engine | Perkins 6.247 105 HP Diesel |
|---|---|
| Separator Type | Conventional - 41-inch wide cylinder |
| Grain Tank | 85 bushels |
| Unloading Rate | 30 bu/min |
| Header Widths | 13-18 ft |
| Fuel Capacity | 38 gallons |
| Weight | Approximately 9,500 lbs |
| Years Produced | Late 1970s - Early 1980s |
540 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance to optimize threshing performance and minimize grain loss. Proper adjustment is crucial for different crop types and conditions.
- Belt and Chain Tension: Check and maintain proper tension on all belts and chains. Loose belts and chains can lead to slippage, reduced efficiency, and premature wear.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer regularly to prevent clogging and ensure efficient grain separation. Accumulated debris can significantly reduce harvesting performance.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations. Proper lubrication is essential for preventing bearing failure and extending the life of critical components.
540 History & Background
The Massey Ferguson 540 was introduced in the late 1970s as a mid-sized combine designed to provide reliable performance at an affordable price. While not featuring any major redesigns during its production run, it remained a popular choice for farmers looking for a straightforward and dependable harvesting solution. Its simple design and ease of maintenance contributed to its longevity in the field.
Frequently Asked Questions
Which fuel filter is suitable for the Massey Ferguson 540?
For the Massey Ferguson 540, the 1049939M1 - Filter, Diesel Fuel is a highly recommended replacement part.
What pre-cleaner bowl fits the Massey Ferguson 540?
The 1018554M1 - Bowl, Pre-Cleaner (10") is designed to fit the Massey Ferguson 540, ensuring proper air intake filtration.
What forged guard should be used for the Massey Ferguson 540's cutting platform?
For the cutting platform of the Massey Ferguson 540, the 228392M2 - Forged Guard, 2 Prong provides reliable performance.
What are the essential wear parts for a Massey Ferguson 540 combine?
To maintain optimal performance of your Massey Ferguson 540, consider these essential wear parts: 832772M1 - Bearing, Pilot, 831788M1 - Bearing, Release, 831225M1 - Seal, Oil, 1053174M1 - Forged Guard, 2 Prong, and 711-056 - 6" Wear Plate, Pack of 2.

VTK408 - 4.318 Valve Train Kit
SKU: VTK408
10 in stock

230205M1 - Low & Reverse Sliding Gear
SKU: 230205M1
3 in stock

893373M91 - Inner Cone
SKU: 893373M91
457 in stock

354370X1 - Inner Cone
SKU: 354370X1
457 in stock

196099M1 - Tie Rod Dust Boot
SKU: 196099M1
249 in stock

182534M91 - Drag Link End
SKU: 182534M91
64 in stock

3641363M91 - Water Pump
SKU: 3641363M91
43 in stock

RA115RRB-I - Non-Relubricatable Ball; Spherical W/ Collar Bearing
SKU: RA115RRB-I
28 in stock

833757M1 - Ball Type
SKU: 833757M1
15 in stock

833735M1 - Ball Type
SKU: 833735M1
45 in stock

833083M1 - Needle Type
SKU: 833083M1
36 in stock

833059M1 - Ball Type
SKU: 833059M1
165 in stock

832339M1 - Roller Type
SKU: 832339M1
3 in stock

832198M1 - Ball Type
SKU: 832198M1
144 in stock

832087M1 - Ball Type
SKU: 832087M1
17 in stock

831861M1 - Spherical Ball Type
SKU: 831861M1
12 in stock

831822M1 - Ball Type
SKU: 831822M1
93 in stock

831729M1 - Tapered Cup
SKU: 831729M1
319 in stock

831728M1 - Tapered Roller
SKU: 831728M1
258 in stock

831225M1 - Oil Seal
SKU: 831225M1
386 in stock

831224M1 - Needle Type
SKU: 831224M1
1 in stock

831134M1 - Ball Bearing
SKU: 831134M1
5 in stock

831112M1 - Ball Type
SKU: 831112M1
20 in stock

831087M1 - Ball Type
SKU: 831087M1
27 in stock








