Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Massey Ferguson 860 Combine Parts

Browse Massey Ferguson 860 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.

The Massey Ferguson 860 combine, produced from the mid-1970s to the early 1980s, was a popular choice for farmers seeking a reliable and efficient grain harvesting solution. Powered by a robust diesel engine offering around 155-175 HP, the 860 handled various crops with ease, especially wheat, soybeans, and corn. Available with header widths up to 20 feet, its conventional separator system provided a good balance of threshing performance and grain quality.

About the 860

The Massey Ferguson 860 combine was introduced in the mid-1970s as a workhorse in the MF combine lineup, continuing production into the early 1980s. It featured a Perkins or Caterpillar diesel engine, typically producing between 155 and 175 horsepower, with a displacement around 540 cubic inches (8.8 liters). The 860 utilized a conventional threshing system with a wide cylinder and walkers for grain separation. Grain tank capacity was around 150 bushels, and the unloading auger could unload at a rate of approximately 40-50 bushels per minute. Available header widths ranged from 13 to 20 feet, catering to different field sizes and crop conditions. While chopper and spreader options were offered, these could vary based on year and dealer modifications. The operator's cab was relatively basic, focusing on functional controls and visibility. The Massey Ferguson 860 excelled at harvesting small grains like wheat and barley, as well as soybeans and corn in some regions.

860 Specifications

EnginePerkins/Caterpillar 155-175 HP 540 cu in Diesel
Separator TypeConventional - Cylinder with walker separation
Grain Tank150 bushels
Unloading Rate40-50 bu/min
Header Widths13-20 ft
Fuel Capacity65 gallons
WeightApprox. 15,000 lbs
Years ProducedMid 1970s - Early 1980s

860 Maintenance Tips

  • Concave Adjustment: Regularly inspect and adjust concave clearance based on crop type and moisture content to optimize threshing performance and minimize grain damage.
  • Belt and Chain Tension: Check and maintain proper tension on all drive belts and chains to prevent slippage, premature wear, and potential breakdowns during harvest.
  • Sieve and Chaffer Cleaning: Clean sieves and chaffers regularly to remove debris and ensure proper airflow for efficient grain cleaning and separation.
  • Bearing Greasing: Grease all bearings according to the manufacturer's recommended schedule to prevent premature failure and maintain smooth operation of moving parts. Pay special attention to header bearings.

860 History & Background

The Massey Ferguson 860 was a key model in the company's combine lineup during its production run. While it didn't receive major redesigns during its lifecycle, minor improvements and refinements were implemented over the years. It represented a reliable and affordable option for farmers seeking a dependable conventional combine harvester.

Frequently Asked Questions

Which engine oil filter is recommended for the Massey Ferguson 860?

For optimal engine performance, the 1447048M1 - Filter, Engine Oil (Spin-On) is recommended for the Massey Ferguson 860 combine.

What bearing is used on the elevator shaft of the Massey Ferguson 860 combine?

The elevator shaft on the Massey Ferguson 860 combine typically uses the 834199M1 - Bearing, Elevator Shaft.

What type of forged guard is suitable for the Massey Ferguson 860 header?

The 1053174M1 - Forged Guard, 2 Prong is a suitable replacement for the Massey Ferguson 860 header.

What are common wear parts and replacements for the Massey Ferguson 860?

Showing 1-24 of 209 products