Massey Ferguson 410 Combine Parts
Replacement parts for the Massey Ferguson 410 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Massey Ferguson 410 combine, produced from 1980-1985, was a popular choice for farmers seeking a reliable and efficient grain harvesting solution. Powered by a Perkins diesel engine pushing around 105 HP, the MF 410 offered header widths up to 15 feet. Known for its conventional separator design, this combine provided a cost-effective and durable option for smaller to medium-sized farms.
About the 410
The Massey Ferguson 410 combine was introduced in 1980 as part of the 400 series, offering a balance of performance and affordability. Production continued until 1985. Under the hood, the MF 410 was powered by a Perkins 6.247 naturally aspirated diesel engine, delivering approximately 105 horsepower with a displacement of 247 cubic inches. This combine utilized a conventional threshing system with a 42-inch wide cylinder. Grain tank capacity was about 115 bushels, and the unloading auger speed could discharge grain at a rate of approximately 25 bushels per minute. Header widths ranged from 13 to 15 feet, accommodating various field sizes and crop conditions. Options included a straw chopper or spreader for residue management. The cab offered basic controls and operator comfort for its time. The MF 410 excelled at harvesting small grains like wheat and soybeans, thanks to its simple and effective threshing system. It was considered a good all-around combine for smaller operations.
410 Specifications
| Engine | Perkins 6.247 105 HP 247 cu in Diesel |
|---|---|
| Separator Type | Conventional - 42-inch Cylinder width |
| Grain Tank | 115 bushels |
| Unloading Rate | 25 bu/min |
| Header Widths | 13-15 ft |
| Fuel Capacity | 45 gallons |
| Weight | 9,500 lbs |
| Years Produced | 1980-1985 |
410 Maintenance Tips
- Concave Adjustment: Regularly check and adjust concave clearance to ensure optimal threshing performance and minimize grain loss. Refer to the operator's manual for recommended settings based on crop type and condition.
- Belt and Chain Tension: Inspect and maintain proper tension on all belts and chains. Loose belts or chains can slip, causing reduced efficiency and premature wear.
- Sieve and Chaffer Cleaning: Regularly clean sieves and chaffers to prevent buildup of debris, which can impede airflow and lead to grain loss. Consider using compressed air for thorough cleaning.
- Bearing Greasing: Lubricate all bearings according to the manufacturer's recommendations. Proper greasing helps prevent premature bearing failure and ensures smooth operation.
410 History & Background
The Massey Ferguson 410 was introduced in 1980 as a mid-range combine in their lineup, aimed at smaller to medium-sized farms. It represented a continuation of Massey Ferguson's commitment to providing reliable and affordable harvesting solutions. The MF 410 filled a crucial gap in the market, offering a balance of features and cost-effectiveness that appealed to a broad range of farmers.
Frequently Asked Questions
Which fuel filter is suitable for the Massey Ferguson 410 combine?
The 1049939M1 - Filter, Diesel Fuel is a suitable replacement for the Massey Ferguson 410.
What replacement bearing is recommended for the elevator shaft on a Massey Ferguson 410?
For the elevator shaft, the 834199M1 - Bearing, Elevator Shaft is an appropriate replacement.
Which forged guard is compatible with the Massey Ferguson 410 combine?
The 228392M2 - Forged Guard, 2 Prong is designed to fit the Massey Ferguson 410.
What are common parts needed for the 410?
Regularly needed parts for the Massey Ferguson 410 combine include wear plates such as the 711-056 - 6" Wear Plate, Pack of 2, drive belts like the B112 - Classical V-Belt (5/8" X 115"), 412-003 - Plated 14ga Top Serrated for cutting assemblies, 354370X1 - Inner Cone components, and 836998M91 - Guide; Finger.

294060M91 - Hydro Coupler
SKU: 294060M91
4 in stock

230205M1 - Low & Reverse Sliding Gear
SKU: 230205M1
3 in stock

893373M91 - Inner Cone
SKU: 893373M91
457 in stock

354370X1 - Inner Cone
SKU: 354370X1
457 in stock

196099M1 - Tie Rod Dust Boot
SKU: 196099M1
249 in stock

182534M91 - Drag Link End
SKU: 182534M91
64 in stock

SPZ1300 - Metric V-Belt (10 X 1300)
SKU: SPZ1300
32 in stock

C60 - Classical (7/8" X 64")
SKU: C60
Out of stock

B98 - Classical V-Belt (5/8" X 101")
SKU: B98
71 in stock

B112 - Classical V-Belt (5/8" X 115")
SKU: B112
343 in stock

G1115KRRB-I - Re-Lubricatable Ball; Spherical W/ Collar Bearing
SKU: G1115KRRB-I
64 in stock

834313M1 - Ball Type
SKU: 834313M1
8 in stock

834199M1 - Elevator Shaft Bearing
SKU: 834199M1
873 in stock

834015M1 - BALL BEARING
SKU: 834015M1
Out of stock

833757M1 - Ball Type
SKU: 833757M1
15 in stock

833735M1 - Ball Type
SKU: 833735M1
45 in stock

833647M1 - Ball Type
SKU: 833647M1
4 in stock

833083M1 - Needle Type
SKU: 833083M1
36 in stock

833059M1 - Ball Type
SKU: 833059M1
165 in stock

832339M1 - Roller Type
SKU: 832339M1
3 in stock

832198M1 - Ball Type
SKU: 832198M1
144 in stock

832087M1 - Ball Type
SKU: 832087M1
17 in stock

831861M1 - Spherical Ball Type
SKU: 831861M1
12 in stock

831822M1 - Ball Type
SKU: 831822M1
93 in stock








