Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Gleaner MH3 Combine Parts

Replacement parts for the Gleaner MH3 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.

The Gleaner MH3 combine, produced from 1978-1987, offered farmers a dependable and efficient harvesting solution. Powered by a robust engine, the MH3 was commonly equipped with header widths ranging from 13 to 30 feet. Its conventional cylinder separator and well-designed cleaning system made it a popular choice for its impressive grain quality and relatively simple maintenance.

About the Mh3

The Gleaner MH3 was introduced in 1978 and remained in production until 1987. It was powered by an Allis-Chalmers 301 CID 6-cylinder diesel engine producing approximately 135 horsepower. The MH3 employed a conventional cylinder and concave system for threshing, known for its gentle grain handling characteristics. It featured a grain tank capacity of approximately 170 bushels and an unloading auger capable of unloading at a rate of around 45 bushels per minute. Available header widths ranged from 13 to 30 feet, allowing for adaptability across different field sizes and crop types. Chopper and spreader options were available to manage crop residue. The cab offered basic operator comfort and controls. This combine excelled in harvesting grains like wheat, soybeans, and corn, particularly in conditions where minimal grain damage was desired.

Mh3 Specifications

EngineAllis-Chalmers 301 CID 135 HP Diesel
Separator TypeConventional - 45.5 inch wide cylinder
Grain Tank170 bushels
Unloading Rate45 bu/min
Header Widths13-30 ft
Fuel Capacity60 gallons
WeightApproximately 14,000 lbs
Years Produced1978-1987

Mh3 Maintenance Tips

  • Concave Adjustment: Regularly check and adjust concave clearance based on the crop being harvested to optimize threshing performance and minimize grain damage.
  • Belt and Chain Tension: Inspect and adjust belt and chain tension regularly, especially before and during harvest, to prevent slippage and premature wear.
  • Sieve and Chaffer Cleaning: Clean the sieves and chaffer screens frequently to remove debris and ensure proper grain separation, preventing losses.
  • Bearing Greasing: Follow the recommended greasing schedule for all bearings to prevent premature failure and ensure smooth operation.

Mh3 History & Background

The Gleaner MH3 was a popular model in the Gleaner lineup during its production run from 1978-1987. It continued Gleaner's tradition of providing durable and reliable combines with a focus on minimizing grain damage. Its conventional design and manageable size made it a versatile option for many farmers.

Frequently Asked Questions

Which water pump fits the Gleaner MH3?

The 74036573 - Pump, Water is a direct replacement for the Gleaner MH3.

What replacement thermostat is recommended for the Gleaner MH3?

For the Gleaner MH3, the 74025103 - Thermostat, 180° ensures optimal engine temperature regulation.

Which alternator is compatible with the Gleaner MH3?

The 79004870 - Alternator, Delco is a reliable charging system component for the Gleaner MH3.

Showing 1-24 of 50 products
71193749 - AC Compressor Belt

71193749 - AC Compressor Belt

SKU: 71193749

$12.03

41 in stock

FTR362-I - Bearing; 3 Bolt Triangular Flange Half

FTR362-I - Bearing; 3 Bolt Triangular Flange Half

SKU: FTR362-I

$2.99

753 in stock

72097583 - Bulb - 12V 21W (1156)

72097583 - Bulb - 12V 21W (1156)

SKU: 72097583

$2.83

115 in stock

621235M1 - Bulb - 12V 21W (1156)

621235M1 - Bulb - 12V 21W (1156)

SKU: 621235M1

$2.83

115 in stock

71131910 - PTO Output Shaft Bearing

71131910 - PTO Output Shaft Bearing

SKU: 71131910

$18.54

89 in stock

W7761220 - Blower Switch

W7761220 - Blower Switch

SKU: W7761220

$12.07

423 in stock

71380935 - Blower Switch

71380935 - Blower Switch

SKU: 71380935

$12.07

423 in stock

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor

SKU: 71336550

$662.78

18 in stock

71307202 - Expansion Valve (block type)

71307202 - Expansion Valve (block type)

SKU: 71307202

$33.96

83 in stock

71195109 - Switch Blower

71195109 - Switch Blower

SKU: 71195109

$12.07

423 in stock

71193543 - Receiver Drier

71193543 - Receiver Drier

SKU: 71193543

$47.14

41 in stock

71190643 - High Pressure Switch

71190643 - High Pressure Switch

SKU: 71190643

$36.58

7 in stock

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor  (12V

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor (12V

SKU: 71188287

$101.63

21 in stock

71182664 - Clutch - York/Tecumseh Style (2 groove 7" pulley)

71182664 - Clutch - York/Tecumseh Style (2 groove 7" pulley)

SKU: 71182664

$200.43

66 in stock

71162474 - Thermostatic Switch

71162474 - Thermostatic Switch

SKU: 71162474

$29.72

73 in stock

70577454 - Switch Blower - 3 speed

70577454 - Switch Blower - 3 speed

SKU: 70577454

$12.07

423 in stock

70257336 - CCW rotation) 5/16" X 2 1/2" shaft Blower Motor  (12V

70257336 - CCW rotation) 5/16" X 2 1/2" shaft Blower Motor (12V

SKU: 70257336

$88.19

7 in stock

317761220 - Sub To 220-215

317761220 - Sub To 220-215

SKU: 317761220

$12.07

423 in stock

303432572 - Sub To 220-215

303432572 - Sub To 220-215

SKU: 303432572

$12.07

423 in stock

303174409 - Blower Switch

303174409 - Blower Switch

SKU: 303174409

$12.07

423 in stock

71311147 - Raddle (Thresher & Seperator) Sprocket

71311147 - Raddle (Thresher & Seperator) Sprocket

SKU: 71311147

$51.75

44 in stock

71194972 - Shoe Bushing

71194972 - Shoe Bushing

SKU: 71194972

$10.28

1707 in stock

71185479 - Seperator Beater Sprocket

71185479 - Seperator Beater Sprocket

SKU: 71185479

$139.92

48 in stock

71181238 - Walker Crank (RH) Sprocket

71181238 - Walker Crank (RH) Sprocket

SKU: 71181238

$49.31

20 in stock