Gleaner F2 Combine Parts
Browse Gleaner F2 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The Gleaner F2 combine, produced from the late 1960s through the late 1970s, was a popular choice for farmers needing a reliable and versatile harvesting solution. Powered by engines ranging from 105 to 130 horsepower, the F2 offered header widths up to 20 feet, making it suitable for medium-sized farms. Its conventional separator design provided efficient threshing and separation, contributing to its reputation for dependable performance.
About the F2
The Gleaner F2 combine was a staple on many farms for its affordability and ease of use. Production spanned from approximately 1967 to 1979. It was typically equipped with an Allis-Chalmers gasoline or diesel engine, with horsepower ranging from 105 HP to 130 HP depending on the year and configuration. The engine displacement ranged from approximately 290 cubic inches to 301 cubic inches. The F2 utilizes a conventional threshing system featuring a 42-inch wide cylinder and walkers for efficient grain separation. Its grain tank holds around 120 bushels, and the unloading auger can unload at a rate of approximately 40-50 bushels per minute. Available header widths ranged from 13 feet to 20 feet. Chopper and spreader options were available to manage crop residue. While the cab was relatively simple compared to modern combines, it offered improved operator comfort and visibility. The Gleaner F2 excelled at harvesting wheat, soybeans, and corn in various conditions, making it a versatile machine for diverse farming operations.
F2 Specifications
| Engine | Allis-Chalmers 105-130 HP Diesel |
|---|---|
| Separator Type | Conventional - 42 inch wide cylinder |
| Grain Tank | 120 bushels |
| Unloading Rate | 40-50 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | 50 gallons |
| Weight | Approx. 14,000 lbs |
| Years Produced | 1967-1979 |
F2 Maintenance Tips
- Concave Adjustment: Regularly check and adjust the concave clearance to ensure proper threshing without damaging the grain. Different crops require different settings.
- Belt and Chain Tension: Inspect belt and chain tension regularly, paying close attention to the main drive belt and feeder house chain. Loose belts or chains can lead to slippage and reduced performance.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer frequently to remove debris and ensure proper separation. A clogged cleaning system reduces grain quality and increases losses.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations. Proper lubrication extends bearing life and prevents premature failure.
F2 History & Background
The Gleaner F2 was introduced in the late 1960s as a mid-sized combine in the Gleaner lineup, offering a balance of performance and affordability. While it didn't undergo major redesigns during its production run, minor improvements were implemented over the years to enhance reliability and efficiency. The F2 played a significant role in making combine harvesting accessible to a wider range of farmers.
Frequently Asked Questions
Which water pump is recommended for the Gleaner F2 combine?
For the Gleaner F2, the 74009278 - Pump, Water is a recommended replacement for efficient engine cooling.
What replacement alternator is suitable for the Gleaner F2?
The 70270835 - Alternator, Delco is an ideal replacement for the Gleaner F2, ensuring your electrical system remains charged.
Which starter solenoid fits the Gleaner F2?
The 1047083M91 - Solenoid, Starter (Delco) is a direct fit for the Gleaner F2's starting system.
What are common replacement parts needed for the Gleaner F2?
Commonly needed replacement parts for the Gleaner F2 include the 71174897 - Stationary Knife Kit, 71146965 - Finger Guide (Poly), 71113826 - Chain Idler Block, 71193749 - Belt, AC Compressor, N1167 - Bearing, Release (greaseable), and 529-016 - Wear Plate, 5.5".

71347791 - Main Drive Clutch Input Shaft
SKU: 71347791
25 in stock

71301767 - Power Output Shaft
SKU: 71301767
Out of stock

71154856 - Hydro Shaft For DynaPower Brand Hydro
SKU: 71154856
8 in stock

71131341 - Main Drive Clutch Input Shaft
SKU: 71131341
46 in stock

79034573 - Traction Drive Belt
SKU: 79034573
32 in stock

79034564 - Pivot (RH) Belt
SKU: 79034564
Out of stock

71322834 - Flex Cutter Bar Drive Belt
SKU: 71322834
24 in stock

71193749 - AC Compressor Belt
SKU: 71193749
41 in stock

FTR362-I - Bearing; 3 Bolt Triangular Flange Half
SKU: FTR362-I
753 in stock

72097583 - Bulb - 12V 21W (1156)
SKU: 72097583
115 in stock

621235M1 - Bulb - 12V 21W (1156)
SKU: 621235M1
115 in stock

LB217 - 2 Prong Forged Guard
SKU: LB217
Out of stock

901-025 - Sickle Head
SKU: 901-025
8 in stock

71131910 - PTO Output Shaft Bearing
SKU: 71131910
89 in stock

W7761220 - Blower Switch
SKU: W7761220
423 in stock

72274512 - Expansion Valve (block type)
SKU: 72274512
83 in stock

71380935 - Blower Switch
SKU: 71380935
423 in stock

71369764 - Expansion Valve (block type)
SKU: 71369764
83 in stock

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor
SKU: 71336550
18 in stock

71307202 - Expansion Valve (block type)
SKU: 71307202
83 in stock

71195109 - Switch Blower
SKU: 71195109
423 in stock

71193543 - Receiver Drier
SKU: 71193543
41 in stock

71190643 - High Pressure Switch
SKU: 71190643
7 in stock

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor (12V
SKU: 71188287
21 in stock








