Case IH 1456 Tractor Parts
Browse Case IH 1456 Tractor replacement parts. Everything from routine maintenance items to hard-to-find components.
The Case IH 1456 tractor, manufactured from 1969 to 1971, was a powerful and reliable workhorse on American farms. It featured an International Harvester DT-402 diesel engine producing around 146 horsepower and boasting a robust 120 PTO horsepower. Its combination of power and durability made the 1456 a popular choice for farmers tackling heavy tillage and demanding fieldwork.
About the 1456
The Case IH 1456 was produced between 1969 and 1971, building on the success of its predecessors in the International Harvester lineup. It was designed as a row-crop tractor, capable of handling a wide range of tasks. The 1456 is powered by an International Harvester DT-402 inline 6-cylinder diesel engine, displacing 402 cubic inches and delivering approximately 146 engine horsepower. This engine was known for its reliability and lugging ability. The tractor was offered with a gear-type transmission, providing 8 forward and 2 reverse speeds. The independent PTO delivered around 120 horsepower, available in both 540 and 1000 RPM configurations. The hydraulic system had a capacity of approximately 15 gallons per minute (GPM) with typically 2 remote valves. It was equipped with a Category II 3-point hitch. Farmers primarily used the 1456 for row crop operations like plowing, disking, planting, and cultivating. It was also suited for hay baling, livestock feeding, and general tillage. The 1456 distinguished itself from other models with its larger engine and increased horsepower, making it suitable for larger farms and heavier workloads.
1456 Specifications
| Engine | International Harvester DT-402 146 HP Diesel |
|---|---|
| PTO HP | 120 HP @ 540/1000 RPM |
| Transmission | Gear 8F/2R |
| Hydraulics | 15 GPM, 2 remotes |
| 3-Point Hitch | Category II, 6,200 lbs lift capacity |
| Fuel Capacity | 38 gallons |
| Weight | 11,635 lbs |
| Years Produced | 1969-1971 |
1456 Maintenance Tips
- Engine Oil & Filter: Change your engine oil and filter every 250 hours of operation, using a high-quality oil that meets or exceeds the manufacturer's specifications. Regularly check oil levels.
- Hydraulic System: Inspect hydraulic fluid levels and filters regularly. Change the hydraulic fluid and filter every 500 hours of operation, or more frequently if the oil appears dirty or contaminated.
- Fuel System: Use clean, high-quality diesel fuel and replace the fuel filter every 250 hours. Drain any water or sediment from the fuel tank regularly. Consider a fuel additive for cold weather operation and to prevent gelling.
- Seasonal Storage: Before storing your tractor for the winter, fill the fuel tank to prevent condensation, change the engine oil and filter, grease all fittings, and disconnect the battery. Store the tractor in a dry, sheltered location.
1456 History & Background
The Case IH 1456 was introduced in 1969 as a part of International Harvester's line of powerful row-crop tractors. It represented a significant step up in horsepower and capability compared to earlier models. While it wasn't drastically redesigned during its short production run, the 1456 left a lasting impact as a dependable and strong tractor, contributing to the modernization of farming practices.
Frequently Asked Questions
Which PTO clutch disc kit is recommended for the Case IH 1456?
The 68803C91 - PTO Clutch Disc Kit is a suitable replacement for the PTO clutch on your 1456 tractor.
Which rear crankshaft seal fits the Case IH 1456?
For the rear crankshaft, the 691631C91 - Seal, Rear Crankshaft is the correct replacement part for the 1456.
Which inner tie rod is appropriate for the Case IH 1456?
The 384006R92 - Tie Rod, Inner is designed for the Case IH 1456 and provides reliable steering performance.
What are some common replacement parts for the Case IH 1456?
Owners of the Case IH 1456 often look for maintenance and repair parts such as the A42467 - Bowl, Pre-Cleaner (10"), the 66487C91 - Brake Disc Seal Kit, 69789C91 - Bearing, Release (sealed), 359984R93 - Tie Rod, Outer, and WL1116 - Sealed Beam, LED, Flood, 4 1/2" Diameter.

531851R1 - Front Axle Clamp Pin
SKU: 531851R1
Out of stock

39-5698 - Pivot Pin Retaining Pin
SKU: 39-5698
Out of stock

384006R1 - inner Ref 12 - Tie rod
SKU: 384006R1
499 in stock

383917R1 - Tube
SKU: 383917R1
238 in stock

374062R1 - Jam Nut
SKU: 374062R1
350 in stock

359986R1 - Clamp
SKU: 359986R1
340 in stock

359984R1 - outer Ref 13 - Tie rod
SKU: 359984R1
415 in stock

223313 - Complete Tie Rod Assembly
SKU: 223313
349 in stock

LM603049-I - Tapered Roller Bearing Cone
SKU: LM603049-I
336 in stock

LM603011-I - Tapered Bearing Cup
SKU: LM603011-I
94 in stock

LM48548-I - Tapered Roller Bearing Cone
SKU: LM48548-I
794 in stock

LM48510-I - Tapered Bearing Cup
SKU: LM48510-I
340 in stock

WL7610 - Trapezoid LED Light Assembly
SKU: WL7610
98 in stock

WL7606 - Flood LED Light Assembly
SKU: WL7606
92 in stock

WL3005 - Combo LED Sealed Beam
SKU: WL3005
58 in stock

WL2116 - 4 1/2" Diameter Trapezoid LED Sealed Beam
SKU: WL2116
341 in stock

WL1116 - 4 1/2" Diameter Flood LED Sealed Beam
SKU: WL1116
1157 in stock

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)
SKU: C5NN13N359E
96 in stock

A42294 - Sealed Beam Bulb (12 Volt)
SKU: A42294
340 in stock

388947R1 - Lamp Retainer
SKU: 388947R1
178 in stock

373662R1 - Sealed Beam Bulb (12 Volt)
SKU: 373662R1
246 in stock

371461R92 - Sealed Beam; Rear Work Lamp (12V) 4409X Floodlamp
SKU: 371461R92
200 in stock

28A157 - H7606 Halogen Sealed Beam Lamps
SKU: 28A157
53 in stock

130609 - AMBER FL LIGHT
SKU: 130609
96 in stock








