Case IH 1175 Tractor Parts

1175 parts and accessories

The Case IH 1175 tractor, manufactured from 1972 to 1977, was a popular choice for farmers needing a reliable workhorse. Powered by a robust 108 horsepower diesel engine, it delivered ample power for a variety of tasks. Its impressive PTO horsepower made it ideal for operating implements like balers and mowers, cementing its place as a dependable tractor in its era.

The Case IH 1175 was introduced in 1972, building upon the success of previous International Harvester models. It continued production until 1977. Under the hood, you'd find an International Harvester D358 6-cylinder diesel engine, producing approximately 108 horsepower. The engine displacement was 358 cubic inches (5.9 liters). This tractor came equipped with a gear transmission, typically an 8-speed forward and 4-speed reverse. The PTO horsepower was rated around 95 HP at 540 RPM, enabling it to power a range of implements effectively. Its hydraulic system had a capacity of approximately 14 GPM, powering the two remote hydraulic valves. The 3-point hitch was Category II, allowing for the use of a wide array of implements. Common farming applications for the 1175 included row crop work, hay production, livestock operations, and general tillage. Compared to smaller models, the 1175 offered more power and hydraulic capacity, making it suitable for larger farms and more demanding tasks.

Specifications

Engine	International Harvester D358 108 HP Diesel
PTO HP	95 HP @ 540 RPM
Transmission	Gear 8 Forward, 4 Reverse
Hydraulics	14 GPM, 2 remotes
3-Point Hitch	Category II, 4,400 lbs Lift Capacity
Fuel Capacity	35 gallons
Weight	9,700 lbs
Years Produced	1972-1977

Maintenance Tips

Engine Oil & Filter: Change the engine oil and filter every 250 hours of operation, using a high-quality diesel engine oil that meets or exceeds the manufacturer's specifications.
Hydraulic Maintenance: Inspect hydraulic fluid levels regularly and change the hydraulic filter every 500 hours. Use the correct type of hydraulic fluid specified in the operator's manual.
Fuel System Care: Regularly drain the fuel sediment bowl to remove water and debris. Replace the fuel filter annually to ensure proper fuel flow and prevent engine damage.
Seasonal Storage: Before storing the tractor for the off-season, stabilize the fuel, grease all fittings, and disconnect the battery. Store the tractor in a dry location to prevent rust and corrosion.

History & Background

The Case IH 1175 was launched in 1972 as part of International Harvester's line of tractors designed for medium to large farms. While it didn't undergo major redesigns during its production run, it represented a significant step forward in terms of power and features compared to earlier models. It remains a sought-after classic tractor due to its reliability and versatility.

Frequently Asked Questions

What engine is in the Case Ih 1175?

The Case IH 1175 is powered by an International Harvester D358 6-cylinder diesel engine, producing approximately 108 horsepower with a displacement of 358 cubic inches.

What is the PTO horsepower on a 1175?

The Case IH 1175 has a PTO horsepower rating of around 95 HP, operating at 540 RPM. There is only a 540 RPM PTO option for this model.

What oil filter fits the 1175?

Common oil filter cross-references for the Case IH 1175 include Fram PH25, Wix 51794, and NAPA 1794. Always verify the correct filter based on your specific tractor's year and any aftermarket modifications.

What are common parts needed for the 1175?

Common wear parts for the Case IH 1175 include engine oil filters, fuel filters, air filters, hydraulic filters, belts (fan, alternator), hydraulic cylinder seals, tie rod ends, clutch discs, and pressure plates.

Showing 1-24 of 165 products

Sort by: