Case IH 1456 Tractor Parts
1456 parts and accessories
The Case IH 1456 tractor, manufactured from 1969 to 1971, was a powerful and reliable workhorse on American farms. It featured an International Harvester DT-402 diesel engine producing around 146 horsepower and boasting a robust 120 PTO horsepower. Its combination of power and durability made the 1456 a popular choice for farmers tackling heavy tillage and demanding fieldwork.
The Case IH 1456 was produced between 1969 and 1971, building on the success of its predecessors in the International Harvester lineup. It was designed as a row-crop tractor, capable of handling a wide range of tasks. The 1456 is powered by an International Harvester DT-402 inline 6-cylinder diesel engine, displacing 402 cubic inches and delivering approximately 146 engine horsepower. This engine was known for its reliability and lugging ability. The tractor was offered with a gear-type transmission, providing 8 forward and 2 reverse speeds. The independent PTO delivered around 120 horsepower, available in both 540 and 1000 RPM configurations. The hydraulic system had a capacity of approximately 15 gallons per minute (GPM) with typically 2 remote valves. It was equipped with a Category II 3-point hitch. Farmers primarily used the 1456 for row crop operations like plowing, disking, planting, and cultivating. It was also suited for hay baling, livestock feeding, and general tillage. The 1456 distinguished itself from other models with its larger engine and increased horsepower, making it suitable for larger farms and heavier workloads.
Specifications
| Engine | International Harvester DT-402 146 HP Diesel |
|---|---|
| PTO HP | 120 HP @ 540/1000 RPM |
| Transmission | Gear 8F/2R |
| Hydraulics | 15 GPM, 2 remotes |
| 3-Point Hitch | Category II, 6,200 lbs lift capacity |
| Fuel Capacity | 38 gallons |
| Weight | 11,635 lbs |
| Years Produced | 1969-1971 |
Maintenance Tips
- Engine Oil & Filter: Change your engine oil and filter every 250 hours of operation, using a high-quality oil that meets or exceeds the manufacturer's specifications. Regularly check oil levels.
- Hydraulic System: Inspect hydraulic fluid levels and filters regularly. Change the hydraulic fluid and filter every 500 hours of operation, or more frequently if the oil appears dirty or contaminated.
- Fuel System: Use clean, high-quality diesel fuel and replace the fuel filter every 250 hours. Drain any water or sediment from the fuel tank regularly. Consider a fuel additive for cold weather operation and to prevent gelling.
- Seasonal Storage: Before storing your tractor for the winter, fill the fuel tank to prevent condensation, change the engine oil and filter, grease all fittings, and disconnect the battery. Store the tractor in a dry, sheltered location.
History & Background
The Case IH 1456 was introduced in 1969 as a part of International Harvester's line of powerful row-crop tractors. It represented a significant step up in horsepower and capability compared to earlier models. While it wasn't drastically redesigned during its short production run, the 1456 left a lasting impact as a dependable and strong tractor, contributing to the modernization of farming practices.
Frequently Asked Questions
What engine is in the Case Ih 1456?
The Case IH 1456 is powered by an International Harvester DT-402 6-cylinder diesel engine producing approximately 146 horsepower.
What is the PTO horsepower on a 1456?
The PTO horsepower rating on the Case IH 1456 is approximately 120 horsepower, available in both 540 and 1000 RPM configurations.
What oil filter fits the 1456?
Common oil filter cross-references for the Case IH 1456 include IH part number 313554R91, Fleetguard LF670, and Wix 51794. Always verify fitment with your parts supplier.
What are common parts needed for the 1456?
Common parts needed for the Case IH 1456 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic cylinder seal kits, steering components (tie rod ends, steering cylinders), and clutch components (disc, pressure plate, throwout bearing).

399329R2 - 2 Light (RH) Fender
SKU: 399329R2
37 in stock

399328R2 - 2 Light (LH) Fender
SKU: 399328R2
65 in stock

388944R2 - Fender Mounting U-Bolt
SKU: 388944R2
198 in stock

380415R11 - Battery Cover
SKU: 380415R11
143 in stock

3345 - Open Station; LH Step
SKU: 3345
10 in stock

235700A2 - Fender Handle Grommet
SKU: 235700A2
296 in stock

CFM325 - Floor Mat
SKU: CFM325
38 in stock

CFM320 - Floor Mat
SKU: CFM320
41 in stock

CFM315 - Floor Mat
SKU: CFM315
49 in stock

399306R2 - Handle (RH)
SKU: 399306R2
7 in stock

397890R2 - Handle (LH)
SKU: 397890R2
59 in stock

PCK721 - PTO Clutch Disc & Gasket Kit
SKU: PCK721
144 in stock

77721C91 - Plunger Gasket
SKU: 77721C91
23 in stock

77720C94 - Seal & Gasket Kit
SKU: 77720C94
976 in stock

68803C91 - Consist Of: PTO Clutch Disc Kit
SKU: 68803C91
222 in stock

68802C91 - Consist Of: PTO Clutch Disc Kit
SKU: 68802C91
51 in stock

64785C92 - Rear PTO Housing Cover
SKU: 64785C92
Out of stock

576539R1 - Needle; PTO Driven Gear Bearing
SKU: 576539R1
236 in stock

528677R1 - IPTO Driven Gear
SKU: 528677R1
13 in stock

528676R1 - IPTO Drive Shaft
SKU: 528676R1
78 in stock

393111R2 - PTO 540 RPM Shaft
SKU: 393111R2
128 in stock

393071R2 - DUST; IND. PTO CTRL. / DIFF. LOCK BOOT
SKU: 393071R2
407 in stock

389529R1 - PTO Drive Shaft
SKU: 389529R1
16 in stock

384185R1 - IPTO Bushing
SKU: 384185R1
46 in stock
