Case IH 1566 Tractor Parts
Find parts for your Case IH 1566 Tractor. We stock OEM and quality aftermarket replacements ready to ship.
The Case IH 1566 tractor, manufactured from 1973 to 1976, was a popular choice for farmers seeking a powerful and reliable machine. Powered by an International Harvester DT-414 turbocharged diesel engine producing approximately 145 horsepower, the 1566 delivered ample power for demanding tasks. Its robust design and impressive PTO horsepower made it a workhorse in fields across the nation.
About the 1566
The Case IH 1566 tractor was introduced in 1973 and continued production through 1976. This model was a key part of International Harvester's lineup, providing farmers with a powerful and versatile tractor for a range of applications. It was equipped with an International Harvester DT-414 6.8L (414 cu in) turbocharged diesel engine, delivering around 145 engine horsepower. The transmission was typically a gear-type transmission with options including 8 forward and 4 reverse speeds or a Torque Amplifier transmission. The PTO horsepower was rated at approximately 130 HP at 1000 RPM. The hydraulic system had a capacity of around 15 GPM, powering two remote hydraulic valves. The 3-point hitch was a Category II hitch. The 1566 found common application in row crop farming, hay production, livestock operations, and tillage. What distinguished it from other models in the IH lineup was its increased horsepower and heavier-duty components, allowing it to handle more demanding tasks than smaller tractors while remaining more economical than larger, more complex machines.
1566 Specifications
| Engine | International Harvester DT-414 145 HP 414 cu in Diesel |
|---|---|
| PTO HP | 130 HP @ 1000 RPM |
| Transmission | Gear 8F/4R or Torque Amplifier |
| Hydraulics | 15 GPM, 2 remotes |
| 3-Point Hitch | Category II, 6,200 lbs lift capacity |
| Fuel Capacity | 46 gallons |
| Weight | 13,735 lbs |
| Years Produced | 1973-1976 |
1566 Maintenance Tips
- Change engine oil and filter every 125-250 hours, depending on operating conditions. Use the recommended SAE grade oil for your climate.
- Inspect and maintain hydraulic fluid levels regularly. Check for leaks in hoses and fittings, and replace the hydraulic filter according to the manufacturer's recommendations to prevent contamination.
- Use a fuel stabilizer during seasonal storage to prevent fuel degradation and keep the fuel system clean. Also, drain any water from the fuel/water separator.
- Check and clean or replace the air filter regularly to ensure proper engine performance and prevent damage from dust and debris.
1566 History & Background
The Case IH 1566 was introduced in 1973 as part of International Harvester's "66 Series" tractors. These tractors were known for their improved operator comfort and hydraulic performance compared to previous models. The 1566 became a popular choice among farmers due to its reliability and power for a wide range of farming tasks.
Frequently Asked Questions
Which water pump fits the Case IH 1566?
The recommended water pump for the Case IH 1566 is the 673162C1 - WATER PUMP.
What needle bearing is used in the PTO driven gear for the Case IH 1566?
For the PTO driven gear in the Case IH 1566, you will need the 576539R1 - Bearing, Needle; PTO Driven Gear.
What oil filter fits the 1566?
The Case IH 1566 uses an oil filter such as the LF3316 - Filter, Lube, Full-Flow Spin-On. We recommend verifying compatibility with your specific tractor's manual.
What are common parts needed for the 1566?
For the Case IH 1566, common replacement parts include the 384006R92 - Tie Rod, Inner, 57119C1 - Rubber Boot, Clutch Booster, and a 77720C94 - Seal & Gasket Kit. Other frequently replaced items are the WBKIH3 - Wheel Bearing Kit, WL1116 - Sealed Beam, LED, Flood, 4 1/2" Diameter, and a 1500626C92 - Cap, Radiator w/ Cover (10 lb.).

VTK241 - Valve Train Kit
SKU: VTK241
7 in stock

SW462 - Cylinder Liner
SKU: SW462
15 in stock

671806C1 - Tach Drive
SKU: 671806C1
65 in stock

71816C91 - Center Axle
SKU: 71816C91
Out of stock

531260R92 - w/ Bushings Knee
SKU: 531260R92
91 in stock

39-5698 - Pivot Pin Retaining Pin
SKU: 39-5698
Out of stock

383917R1 - Tube
SKU: 383917R1
238 in stock

375620R1 - Tie Rod Clamp
SKU: 375620R1
340 in stock

374062R1 - Jam Nut
SKU: 374062R1
350 in stock

359984R1 - outer Ref 13 - Tie rod
SKU: 359984R1
415 in stock

223313 - Complete Tie Rod Assembly
SKU: 223313
349 in stock

LM603049-I - Tapered Roller Bearing Cone
SKU: LM603049-I
336 in stock

LM603011-I - Tapered Bearing Cup
SKU: LM603011-I
94 in stock

LM48548-I - Tapered Roller Bearing Cone
SKU: LM48548-I
794 in stock

LM48510-I - Tapered Bearing Cup
SKU: LM48510-I
340 in stock

WL7610 - Trapezoid LED Light Assembly
SKU: WL7610
98 in stock

WL7606 - Flood LED Light Assembly
SKU: WL7606
92 in stock

WL2116 - 4 1/2" Diameter Trapezoid LED Sealed Beam
SKU: WL2116
341 in stock

WL1116 - 4 1/2" Diameter Flood LED Sealed Beam
SKU: WL1116
1157 in stock

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)
SKU: C5NN13N359E
96 in stock

A42294 - Sealed Beam Bulb (12 Volt)
SKU: A42294
340 in stock

388947R1 - Lamp Retainer
SKU: 388947R1
178 in stock

373662R1 - Sealed Beam Bulb (12 Volt)
SKU: 373662R1
246 in stock

28A157 - H7606 Halogen Sealed Beam Lamps
SKU: 28A157
53 in stock








