Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Case IH 7010 Combine Parts

Case IH 7010 Combine parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.

The Case IH 7010 combine, manufactured from 2007 to 2011, was a powerful rotary combine that delivered high-capacity harvesting. Equipped with engines up to 350 HP and available with header widths ranging from 30 to 40 feet, the 7010 quickly gained popularity among farmers looking for increased productivity in wheat, corn, and soybean harvesting. Its Advanced Farming Systems (AFS) technology further enhanced its appeal.

About the 7010

The Case IH 7010 was introduced in 2007 as part of the Axial-Flow series, replacing earlier models and offering significant improvements in performance and technology. Production continued through 2011. The 7010 is powered by an 8.7L Case IH FPT engine producing approximately 350 horsepower. This engine provides ample power for the Axial-Flow single rotor threshing and separating system, renowned for its gentle handling of grain and efficient separation. The grain tank capacity is approximately 315 bushels, and the unloading auger can unload at a rate of approximately 3.2 bushels per second (around 190 bu/min). The 7010 could accommodate a variety of header widths, ranging from 30 to 40 feet, allowing operators to customize the machine for different crop conditions and field sizes. Chopper and spreader options were available to manage residue effectively. The cab featured advanced technology, including AFS Pro 600 display for monitoring performance and adjusting settings. The Case IH 7010 excels at harvesting a wide range of crops, including wheat, corn, soybeans, and other small grains, making it a versatile and valuable asset for any farming operation.

7010 Specifications

EngineCase IH FPT 350 HP 8.7L Diesel
Separator TypeAxial-Flow Rotary - Single Rotor
Grain Tank315 bushels
Unloading Rate190 bu/min
Header Widths30-40 ft
Fuel Capacity250 gallons
Weight32,000 lbs
Years Produced2007-2011

7010 Maintenance Tips

  • Regularly inspect and adjust concave clearances according to the crop being harvested to ensure optimal threshing and reduce grain loss.
  • Check and maintain proper belt and chain tension to prevent slippage and premature wear, extending the lifespan of these components.
  • Clean the sieve and chaffer regularly to remove debris and ensure proper air flow, which is critical for efficient grain cleaning.
  • Grease all bearings and lubrication points according to the manufacturer's recommendations to minimize friction and prevent bearing failure. Consider pre-season maintenance to get everything in working order before harvest.

7010 History & Background

The Case IH 7010 was introduced in 2007 as a part of the Axial-Flow series of combines. This model was designed to provide high-capacity harvesting capabilities with the use of its single rotor system and larger engine. The 7010 marked a significant step in combine technology during its production years.

Frequently Asked Questions

Which rotor bar is suitable for the Case IH 7010?

The 1309336C2 - Rotor Bar, w/o Spike is a direct fit for the Case IH 7010.

What unloading auger extension bearing support is needed for the 7010?

The 84072623 - Support, Unloading Auger Extension Bearing is designed for the Case IH 7010.

Which rotor impeller shield is used in the Case IH 7010's separator?

The 87315598 - Shield, Rotor Impeller is a key component of the 7010's Axial-Flow separator.

What are the essential wear and replacement parts for the Case IH 7010?

Showing 1-24 of 244 products
84814042 - Steering Cylinder End
Out of Stock

84814042 - Steering Cylinder End

SKU: 84814042

$82.28

Out of stock

84442906 - Short Threaded Tie Rod

84442906 - Short Threaded Tie Rod

SKU: 84442906

$55.93

135 in stock

41461S-I - Seal

41461S-I - Seal

SKU: 41461S-I

$3.44

185 in stock

169293C11 - Steering Axle Hub

169293C11 - Steering Axle Hub

SKU: 169293C11

$207.71

28 in stock

84438982 - Splined; Planetary Drive Coupling
Out of Stock

84438982 - Splined; Planetary Drive Coupling

SKU: 84438982

$103.31

Out of stock

84069687 - Transmission Output Shaft

84069687 - Transmission Output Shaft

SKU: 84069687

$240.22

1 in stock

87534058 - Steering Valve Seal Kit

87534058 - Steering Valve Seal Kit

SKU: 87534058

$33.13

94 in stock

BC108 - Bearing (Import) Collar

BC108 - Bearing (Import) Collar

SKU: BC108

$15.51

90 in stock

167269 - O-Ring

167269 - O-Ring

SKU: 167269

$3.76

9 in stock

128825 - O-Ring

128825 - O-Ring

SKU: 128825

$1.35

2750 in stock

41461S-P - Seal

41461S-P - Seal

SKU: 41461S-P

$14.44

10 in stock

87607871 - Rotary Screen Drive Belt

87607871 - Rotary Screen Drive Belt

SKU: 87607871

$24.29

48 in stock

87526140 - Engine Fan Belt

87526140 - Engine Fan Belt

SKU: 87526140

$20.77

15 in stock

87317063 - Shoe Drive Belt
Out of Stock

87317063 - Shoe Drive Belt

SKU: 87317063

$62.46

Out of stock

87011585 - Unloading Auger Drive Belt

87011585 - Unloading Auger Drive Belt

SKU: 87011585

$118.85

1 in stock

86976208 - Straw Chopper Drive (3000 RPM) Belt
Out of Stock

86976208 - Straw Chopper Drive (3000 RPM) Belt

SKU: 86976208

$129.38

Out of stock

86975809 - Bubble Up Belt

86975809 - Bubble Up Belt

SKU: 86975809

$77.26

17 in stock

86517680 - Straw Chopper Drive Belt

86517680 - Straw Chopper Drive Belt

SKU: 86517680

$137.69

1 in stock

86514512 - Rotary Screen Drive Belt

86514512 - Rotary Screen Drive Belt

SKU: 86514512

$37.17

51 in stock

504212528 - AC Compressor Belt

504212528 - AC Compressor Belt

SKU: 504212528

$11.57

29 in stock

500371653 - Alternator Belt

500371653 - Alternator Belt

SKU: 500371653

$50.03

21 in stock

RA112RRB-I - Non-Relubricatable Ball; Spherical W/ Collar Bearing

RA112RRB-I - Non-Relubricatable Ball; Spherical W/ Collar Bearing

SKU: RA112RRB-I

$53.54

79 in stock

RA108RRB-I - Non-Relubricatable Ball; Spherical W/ Collar Bearing

RA108RRB-I - Non-Relubricatable Ball; Spherical W/ Collar Bearing

SKU: RA108RRB-I

$25.42

352 in stock

LM104911-P - Tapered Bearing Cup

LM104911-P - Tapered Bearing Cup

SKU: LM104911-P

$13.28

47 in stock