Massey Ferguson 8780 Combine Parts
Find parts for your Massey Ferguson 8780 Combine. We stock OEM and quality aftermarket replacements ready to ship.
The Massey Ferguson 8780 combine, produced from 1996-2000, became a popular choice for farmers seeking a reliable and productive harvesting solution. With engine options reaching up to 275 HP and header widths up to 30 feet, the 8780 offered considerable capacity. Its advanced rotary separation system ensured efficient grain processing, making it a valuable asset for medium to large-scale farming operations.
About the 8780
The Massey Ferguson 8780 was introduced in 1996 and remained in production until 2000. This combine features a powerful Sisu Diesel engine, delivering approximately 275 horsepower with a displacement of around 8.4 liters. The 8780 utilizes a rotary separation system, known for its high throughput and gentle grain handling. The grain tank capacity is around 300 bushels, and it unloads at a rate of approximately 2.5 bushels per second (150 bu/min). Available header widths range from 20 to 30 feet, catering to varying field sizes and crop types. Chopper and spreader options were available to manage residue effectively. The cab offered enhanced operator comfort and controls for optimizing harvesting performance. The MF 8780 excels in harvesting a wide range of crops, including wheat, corn, soybeans, and other small grains, due to its adaptable settings and efficient separation capabilities.
8780 Specifications
| Engine | Sisu Diesel 275 HP 8.4L Diesel |
|---|---|
| Separator Type | Rotary - Single Rotor |
| Grain Tank | 300 bushels |
| Unloading Rate | 150 bu/min |
| Header Widths | 20-30 ft |
| Fuel Capacity | 160 gallons |
| Weight | 24,000 lbs |
| Years Produced | 1996-2000 |
8780 Maintenance Tips
- Concave Adjustment: Regularly check and adjust concave clearance to optimize threshing performance and minimize grain damage. Refer to the operator's manual for recommended settings based on crop type.
- Belt and Chain Tension: Inspect all belts and chains for wear and proper tension. Loose belts or chains can cause slippage, reduced efficiency, and premature component failure.
- Sieve and Chaffer Cleaning: Clean sieves and chaffers regularly to prevent plugging and ensure efficient grain separation. Use compressed air or a brush to remove debris.
- Bearing Greasing: Grease all bearings according to the recommended schedule outlined in the operator's manual. Proper lubrication is crucial for preventing bearing failure and extending component life.
8780 History & Background
The Massey Ferguson 8780 was introduced in the mid-1990s as a technologically advanced rotary combine, building upon Massey Ferguson's legacy of agricultural innovation. The 8780 represented a significant step forward in combine technology, offering improved harvesting efficiency and grain quality compared to previous models. Its introduction marked Massey Ferguson's commitment to providing farmers with reliable and high-performance harvesting solutions.
Frequently Asked Questions
Which water pump is recommended for the Massey Ferguson 8780?
For the Massey Ferguson 8780, the recommended replacement water pump is 303436748 - Pump, Water.
What air filter is suitable for the Massey Ferguson 8780?
The AF4878 - Filter, Air, Primary Magnum RS is a suitable primary air filter for the Massey Ferguson 8780.
Which concave should I use for small grain harvesting with the Massey Ferguson 8780?
For small grain harvesting with the Massey Ferguson 8780, the 71390005 - Concave; High Wire, Small Grain is recommended.
What are the most commonly replaced wear parts for the Massey Ferguson 8780 combine?
For routine maintenance and wear part replacement on the Massey Ferguson 8780, frequently needed items include the 104904W91 - Concave; Low Wire, Small Grain, 71382759 - Blade, RH Straw Chopper, 71385837 - Belt; Chopper Primary Drive, 102817M91 - Chain, Clean Grain Elevator, RA106RR-I - Bearing, Ball, and FS1280 - Separator, Fuel/Water.

196099M1 - Tie Rod Dust Boot
SKU: 196099M1
249 in stock

303436748 - Water Pump
SKU: 303436748
82 in stock

71388712 - Chopper Secondary Drive Belt
SKU: 71388712
17 in stock

71386352 - Beater Drive Belt
SKU: 71386352
5 in stock

71385837 - Chopper Primary Drive Belt
SKU: 71385837
12 in stock

71385801 - Belt; Return Elevator Drive
SKU: 71385801
4 in stock

RA106RR-I - Non-Relubricatable Ball; Cylindrical W/ Collar Bearing
SKU: RA106RR-I
188 in stock

1106KRRB-I - Non-Relubricatable Ball; Spherical W/ Collar Bearing
SKU: 1106KRRB-I
41 in stock

K4037 - Bearing (WPS106GRC)
SKU: K4037
58 in stock

GRA103RRB2-I - Re-Lubricatable Ball; Spherical W/ Collar Bearing
SKU: GRA103RRB2-I
152 in stock

G1115KRRB-I - Re-Lubricatable Ball; Spherical W/ Collar Bearing
SKU: G1115KRRB-I
64 in stock

FTR362-I - Bearing; 3 Bolt Triangular Flange Half
SKU: FTR362-I
753 in stock

834581M1 - Tapered Cup
SKU: 834581M1
83 in stock

834580M1 - Tapered Roller
SKU: 834580M1
28 in stock

831822M1 - Ball Type
SKU: 831822M1
93 in stock

71308951 - ADAPTOR BEARING
SKU: 71308951
873 in stock

WL7610 - Trapezoid LED Light Assembly
SKU: WL7610
98 in stock

WL7606 - Flood LED Light Assembly
SKU: WL7606
92 in stock

WL2116 - 4 1/2" Diameter Trapezoid LED Sealed Beam
SKU: WL2116
341 in stock

WL1275 - Hi / Low LED Sealed Beam
SKU: WL1275
147 in stock

WL1116 - 4 1/2" Diameter Flood LED Sealed Beam
SKU: WL1116
1157 in stock

3715144M92 - Pipe Type Amber Rotating Beacon
SKU: 3715144M92
651 in stock

1628494M1 - Lamp Bulb H3 (12V 55W)
SKU: 1628494M1
151 in stock

72274512 - Expansion Valve (block type)
SKU: 72274512
83 in stock








