Massey Ferguson 851 Combine Parts
Browse Massey Ferguson 851 Combine replacement parts. Everything from routine maintenance items to hard-to-find components.
The Massey Ferguson 851 combine, produced in the late 1970s and early 1980s, offered farmers a reliable and efficient harvesting solution. Equipped with engines around 140-160 HP and available with header widths ranging from 13 to 20 feet, this conventional separator combine was a popular choice for its simplicity and ease of maintenance. Its robust design and efficient threshing system made it a favorite for smaller to mid-sized farming operations.
About the 851
The Massey Ferguson 851 combine harvester was a workhorse introduced in the late 1970s and continued production into the early 1980s. It typically featured a Perkins diesel engine, delivering approximately 140-160 horsepower with a displacement around 354 cubic inches. The 851 utilized a conventional threshing system, incorporating a cylinder and concave to separate grain from the plant material. Grain tank capacity was around 150-175 bushels, with an unloading auger capable of emptying at a rate of approximately 50-60 bushels per minute. Header widths varied, offering options between 13 and 20 feet to accommodate different field sizes and crop types. While a dedicated chopper was not always standard, options for straw spreading were available. The cab provided basic operator comfort with a seat and controls, but was not as advanced as later models. The 851 excelled at harvesting wheat, soybeans, and corn in appropriate field conditions, offering a cost-effective and dependable harvesting solution for many farmers.
851 Specifications
| Engine | Perkins 354 Diesel (approx.) 140-160 HP |
|---|---|
| Separator Type | Conventional - 45 inch Cylinder width |
| Grain Tank | 150-175 bushels |
| Unloading Rate | 50-60 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | Approx. 60 gallons |
| Weight | Approx. 13,000 lbs |
| Years Produced | Late 1970s - Early 1980s |
851 Maintenance Tips
- Concave Adjustment: Regularly inspect and adjust the concave clearance according to the crop being harvested to optimize threshing efficiency and minimize grain damage.
- Belt and Chain Tension: Maintain proper tension on all belts and chains, ensuring they are neither too loose nor too tight, to prevent slippage, premature wear, and potential breakdowns.
- Sieve and Chaffer Cleaning: Regularly clean the sieves and chaffer to remove debris and ensure proper airflow, which is crucial for effective grain separation and minimizing losses.
- Bearing Greasing: Follow the manufacturer's recommended greasing schedule for all bearings to prevent premature wear and failure, ensuring smooth operation of critical components.
851 History & Background
The Massey Ferguson 851 was introduced as a successor to earlier MF combine models, offering improved capacity and efficiency. While it didn't undergo major redesigns during its production run, it represented a solid advancement in conventional combine technology at the time. The 851 played a significant role in providing reliable harvesting capabilities to a wide range of farming operations.
Frequently Asked Questions
Which straw chopper knife kit fits the Massey Ferguson 851 combine?
For the Massey Ferguson 851 combine, the recommended straw chopper knife kit is 71310275 - Straw Chopper Knife Kit.
What replacement grain pan is available for the Massey Ferguson 851?
We offer the GPMF7501 - Grain Pan, 1 Piece as a suitable replacement for the Massey Ferguson 851.
Which angle bars are used in the threshing system of the Massey Ferguson 851?
For the threshing system of the Massey Ferguson 851, we stock the V12055 - Angle Bar, 4R/4L.
What are common wear parts needed for the Massey Ferguson 851 combine?
Commonly needed wear parts for the Massey Ferguson 851 combine include 836784M92 - Straw Walker Wood Blocks, 293054M2 - Heavy Rubber Paddle, 353161X1 - Bearing, Elevator Drive Shaft, 270277M1 - Sprocket, Elevator, and the 252318M1 - Rethresher Channel.

41461S-I - Seal
SKU: 41461S-I
185 in stock

41461S-P - Seal
SKU: 41461S-P
10 in stock

842504M1 - Ball Type
SKU: 842504M1
7 in stock

834869M1 - Ball Type
SKU: 834869M1
13 in stock

834313M1 - Ball Type
SKU: 834313M1
8 in stock

833757M1 - Ball Type
SKU: 833757M1
15 in stock

833741M1 - Ball Type
SKU: 833741M1
2 in stock

833735M1 - Ball Type
SKU: 833735M1
45 in stock

833647M1 - Ball Type
SKU: 833647M1
4 in stock

832339M1 - Roller Type
SKU: 832339M1
3 in stock

832198M1 - Ball Type
SKU: 832198M1
144 in stock

832087M1 - Ball Type
SKU: 832087M1
17 in stock

831861M1 - Spherical Ball Type
SKU: 831861M1
12 in stock

831822M1 - Ball Type
SKU: 831822M1
93 in stock

831225M1 - Oil Seal
SKU: 831225M1
386 in stock

831134M1 - Ball Bearing
SKU: 831134M1
5 in stock

831112M1 - Ball Type
SKU: 831112M1
20 in stock

831087M1 - Ball Type
SKU: 831087M1
27 in stock

6209-RS-I - Flat Edge Ball; 6200 Series Bearing
SKU: 6209-RS-I
15 in stock

6018-Z-I - Flat Edge Ball; 6000 Series Bearing
SKU: 6018-Z-I
Out of stock

353161X1 - Elevator Drive Shaft Bearing
SKU: 353161X1
123 in stock

353152X1 - Ball Type
SKU: 353152X1
18 in stock

353140X1 - Ball Type
SKU: 353140X1
217 in stock

353102X1 - Ball Type
SKU: 353102X1
111 in stock








