John Deere 42047 Snow Blower Thrower Parts
42047 parts and accessories
The John Deere 42047 snow blower, known for its robust performance and reliability, was a popular choice for homeowners and light commercial use. A gas-powered, two-stage snow thrower, the 42047 offered a practical clearing width for various snow removal tasks. While specific years of manufacture vary, it represents a period where John Deere prioritized dependable engineering in their snow removal equipment.
The John Deere 42047 snow blower was designed to be a dependable option for tackling moderate to heavy snowfall. While specific production years require further verification, the model typically featured a Briggs & Stratton or Tecumseh engine, ranging from 8-10 HP, with optional electric start for easy starting in cold weather. As a two-stage snow blower, it employs an auger to break up the snow and an impeller to throw it, offering improved performance compared to single-stage models. The clearing width usually fell in the 26-28 inch range, with an intake height around 20-22 inches, allowing it to handle substantial snow depths. Throwing distance could reach up to 30-40 feet depending on snow conditions. It generally used a wheel-drive system with multiple forward and reverse speeds, allowing for precise control. Chute controls were typically manual, allowing the operator to direct the snow stream. A headlight was a common feature for improved visibility during early morning or evening snow removal. While heated grips weren't standard, the 42047 was ideal for homeowners and property managers dealing with moderate to heavy snow accumulations on driveways and walkways.
Specifications
| Engine | Briggs & Stratton or Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-22 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 200 lbs (Approximate) |
| Years Produced | (Requires Further Verification) |
Maintenance Tips
- Inspect the auger and impeller regularly: Check for wear, damage, or bending. Replace worn parts to maintain optimal performance.
- Replace shear pins as needed: Shear pins protect the auger and gearbox from damage if a hard object is struck. Keep spare shear pins on hand.
- Check and adjust belt tension: Proper belt tension ensures efficient power transfer from the engine to the auger and impeller. Refer to the owner's manual for specific instructions.
- Use fuel stabilizer during off-season storage: Fuel stabilizer prevents fuel from breaking down and clogging the carburetor.
History & Background
The John Deere 42047 snow blower was introduced as a mid-range model within John Deere's snow removal lineup. It aimed to provide a balance of power, clearing capacity, and ease of use for residential and light commercial applications. While specific redesigns are not widely documented, the 42047 was part of a period where John Deere established a reputation for building reliable and durable snow removal equipment.
Frequently Asked Questions
What engine is in the John Deere 42047?
The John Deere 42047 typically uses a Briggs & Stratton or Tecumseh engine with a horsepower range of 8-10 HP. Electric start was often available as an option.
What is the clearing width of the 42047?
The clearing width of the John Deere 42047 is typically between 26 and 28 inches, with an intake height of approximately 20-22 inches.
Is the 42047 a single-stage or two-stage snow blower?
The John Deere 42047 is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the discharge chute. This two-stage design allows it to handle heavier and wetter snow than a single-stage model.
What are common parts needed for the 42047?
Common replacement parts for the John Deere 42047 include shear pins, belts (auger and drive), auger paddles (if applicable), a scraper bar, skid shoes, spark plugs, and fuel filters. Regularly inspecting and replacing these parts will keep your snow blower running smoothly.
