John Deere 359 Snow Blower Thrower Parts
The John Deere 359 snow blower, a popular model from the late 20th century, was designed for efficient snow removal on residential properties. Typically featuring a gas engine, the 359 offered a practical clearing width for driveways and walkways. As a two-stage snow thrower, it effectively handled moderate to heavy snowfall, making it a reliable choice for homeowners.
The John Deere 359 snow blower was a well-regarded machine produced in the late 1980s and early 1990s. It was powered by a Tecumseh engine, typically in the 5-8 horsepower range, depending on the specific sub-model. Some models offered an optional electric start for easier starting in cold weather. Being a two-stage snow blower, the 359 utilized an auger system to break up the snow and an impeller to throw it. The clearing width was generally around 26 inches, with an intake height of approximately 20 inches, allowing it to handle a substantial amount of snow. The throwing distance could reach up to 30 feet, depending on snow conditions. The drive system was wheel-based, offering multiple forward and reverse speeds for enhanced maneuverability. Chute controls were typically manual, allowing the operator to direct the snow stream. A headlight was often included for improved visibility during early morning or evening snow removal. While heated grips weren't standard, the machine was well-suited for tackling moderate to heavy snowfalls on driveways, sidewalks, and other residential areas.
Specifications
| Engine | Tecumseh 5-8 HP, Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1980s-Early 1990s |
Maintenance Tips
- Regularly inspect the auger and impeller for any signs of damage or wear. Replace any worn or broken parts promptly to maintain optimal performance.
- Check the shear pins on the auger and replace them if they are broken or sheared. Keep extra shear pins on hand for quick replacements during snow removal.
- Ensure proper belt tension on the drive and auger belts. Adjust as needed to prevent slippage and maintain efficient operation. Replace belts showing signs of wear.
- Change the engine oil annually or as recommended by the engine manufacturer. Use the correct type and viscosity of oil. Adding fuel stabilizer during off-season storage is critical to prevent fuel breakdown.
History & Background
The John Deere 359 was introduced to provide homeowners with a reliable snow removal solution. While specific redesigns are not well documented, it remained a popular choice during its production run due to its balance of power, clearing capacity, and ease of use within the residential snow blower market.
Frequently Asked Questions
What engine is in the John Deere 359?
The John Deere 359 is typically powered by a Tecumseh engine, ranging from 5 to 8 horsepower. An electric start option was available on some models.
What is the clearing width of the 359?
The John Deere 359 has a clearing width of approximately 26 inches and an intake height of around 20 inches.
Is the 359 a single-stage or two-stage snow blower?
The John Deere 359 is a two-stage snow blower. It uses an auger to collect and break up the snow and an impeller to throw the snow through the chute.
What are common parts needed for the 359?
Common parts needed for the John Deere 359 include shear pins, belts (auger and drive), auger paddles, a scraper bar, skid shoes, spark plugs, and fuel filters. Regularly checking and replacing these parts will keep your snow blower running smoothly.
