John Deere 1032D Snow Blower Thrower Parts
Find parts for your John Deere 1032D Snow Blower Thrower. We stock OEM and quality aftermarket replacements ready to ship.
The John Deere 1032D is a robust two-stage snow blower manufactured in the late 1980s and early 1990s, powered by a reliable gas engine. With a 32-inch clearing width, this model became popular for its powerful snow-clearing performance and durability in demanding residential and light commercial environments. Its heavy-duty construction allowed it to tackle deep and heavy snow with ease.
About the 1032D
The John Deere 1032D snow blower was a workhorse model produced in the late 1980s and early 1990s, designed for tackling significant snowfall. It's powered by a Tecumseh engine, typically ranging from 10 to 12 horsepower. While electric start was not standard, some models may have been retrofitted or available with it. This is a two-stage snow blower, meaning it utilizes an auger to break up the snow and then an impeller to throw it away from the cleared area. The serrated auger efficiently chews through packed snow and ice. The 1032D boasts a 32-inch clearing width and an intake height of around 20-21 inches, making it capable of handling substantial snow drifts. Its throwing distance can reach up to 30-40 feet, depending on snow conditions. The drive system features a wheel drive with multiple forward and reverse speeds, offering good maneuverability. Chute controls are typically manual, allowing for directional snow throwing. A headlight provides enhanced visibility during early morning or evening snow removal. While not equipped with heated grips, its durable construction and powerful engine made it a favorite for homeowners and property managers in areas with heavy snowfall. The 1032D is ideal for clearing large driveways, sidewalks, and parking areas.
1032D Specifications
| Engine | Tecumseh 10-12 HP Gas Engine (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 32 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 250 lbs |
| Years Produced | Late 1980s - Early 1990s |
1032D Maintenance Tips
- Auger and Impeller Inspection: Regularly inspect the auger blades and impeller for signs of wear, damage, or bending. Replace worn parts promptly to maintain optimal performance.
- Shear Pin Replacement: Always keep spare shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox. Use only the correct shear pins specified for the 1032D.
- Belt Tension and Condition: Check the drive belt and auger belt for proper tension and signs of wear, cracking, or fraying. Adjust tension or replace belts as needed to ensure efficient power transfer.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
1032D History & Background
The John Deere 1032D was introduced as a mid-sized two-stage snow blower in John Deere's residential equipment lineup. It was designed to provide a balance of power and maneuverability for homeowners and light commercial users. While there weren't major redesigns during its production run, it remains a highly regarded model for its reliability and snow-clearing capabilities.
Frequently Asked Questions
Which air filter is recommended for the John Deere 1032D?
The recommended air filter for the John Deere 1032D is B1AF280 - Air Filter. It is designed to ensure proper air intake and protect the engine.
What shear pin replaces John Deere AM122156 for the 1032D?
The shear pin that replaces John Deere part number AM122156 for your 1032D snow blower is B1SB916 - Shear Pin, 2-1/8". These are designed to protect the auger from damage.
Which drive disc is used in the John Deere 1032D?
The John Deere 1032D uses a drive disc to transfer power from the engine to the wheels. The correct replacement is B1SB300 - Disc, Drive, which helps maintain smooth operation of the drive system.
What are common parts needed for the 1032D?
For the John Deere 1032D, common wear parts include B1SB916 - Shear Pin, 2-1/8", drive belts such as 3L340K - Aramid Blue V-Belt (3/8" X 34" ) and A35K - Aramid Blue V-Belt (1/2" X 37" ), a fresh B1AF280 - Air Filter, replacement M88984 - Blade, Drift Cutter, and various bearings like 6203-2RS-I - Bearing, Ball; 6200 Series, Flat Edge. Regular inspection and replacement of these items ensure dependable performance.

M88984 - Drift Cutter Blade
SKU: M88984
92 in stock

B1SB916 - 2-1/8" Shear Pin
SKU: B1SB916
2425 in stock

AD2062R - Light Bulb
SKU: AD2062R
115 in stock

B1SB813 - Roller Bearing
SKU: B1SB813
690 in stock

B1AX34 - ID 0.500" X OD 1.375" X HT 0.438" BRNG
SKU: B1AX34
541 in stock

6203-2RS-I - Flat Edge Ball; 6200 Series Bearing
SKU: 6203-2RS-I
1516 in stock

B1SB2181 - Flat Idlers w/ Flanges
SKU: B1SB2181
8 in stock

B1SB300 - Drive Disc
SKU: B1SB300
964 in stock

B1AF280 - Air Filter
SKU: B1AF280
27 in stock

3L340K - Aramid Blue V-Belt (3/8" X 34" )
SKU: 3L340K
356 in stock

A35K - Aramid Blue V-Belt (1/2" X 37" )
SKU: A35K
299 in stock








