John Deere 824 Snow Blower Thrower Parts
The John Deere 824 is a popular two-stage gas-powered snow blower known for its reliability and performance. Manufactured throughout the 1980s and 1990s, the 824 features a 24-inch clearing width, making it suitable for both residential driveways and smaller commercial properties. Its robust design and ease of use contributed to its widespread adoption among homeowners and snow removal professionals alike.
The John Deere 824 snow blower was a staple in John Deere's lineup for many years, primarily produced from the late 1970s into the 1990s. Powering this machine is typically an 8 horsepower Briggs & Stratton or Tecumseh gasoline engine. Some models offered an optional electric start for added convenience. The 824 is a two-stage snow blower, employing a serrated auger system to break up compacted snow and ice, followed by an impeller to forcefully throw the snow away. It boasts a 24-inch clearing width and an intake height of approximately 20 inches, enabling it to handle moderate to heavy snowfall. Expect a throwing distance of up to 30-35 feet depending on snow conditions. The drive system is wheel-driven, offering multiple forward and reverse speeds for enhanced maneuverability. The chute rotation is manually controlled, allowing for precise snow placement. While not equipped with a headlight or heated grips, the John Deere 824 is well-suited for clearing driveways, sidewalks, and other residential areas, excelling in moderate snowfalls and icy conditions.
Specifications
| Engine | Tecumseh 8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 5 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1970s - 1990s |
Maintenance Tips
- Regularly inspect the auger blades and impeller for wear or damage. Replace any worn or damaged parts immediately to ensure optimal performance.
- Always use genuine John Deere or OEM-approved shear pins. Using incorrect shear pins can damage the auger gearbox.
- Check the belt tension periodically and adjust as needed. Loose belts can cause slippage and reduce throwing distance.
- Change the engine oil at the recommended intervals (usually annually) and use a fuel stabilizer during off-season storage to prevent fuel degradation. Check and adjust the skid shoes for proper ground clearance, preventing damage to the scraper bar and auger housing.
History & Background
The John Deere 824 was introduced as a mid-sized snow removal solution for homeowners and light commercial use. While there weren't significant redesigns during its production run, improvements were made to the engine and drive system over the years. The 824 became known as a reliable and durable machine, contributing to John Deere's reputation in the snow blower market.
Frequently Asked Questions
What engine is in the John Deere 824?
The John Deere 824 typically uses an 8 horsepower Tecumseh gasoline engine. Electric start was an available option on some models.
What is the clearing width of the 824?
The John Deere 824 has a clearing width of 24 inches and an intake height of approximately 20 inches.
Is the 824 a single-stage or two-stage snow blower?
The John Deere 824 is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller to throw the snow out the chute.
What are common parts needed for the 824?
Common parts needed for the John Deere 824 include shear pins, drive belts, auger belts, auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
