John Deere 338 Snow Blower Thrower Parts
338 parts and accessories
The John Deere 338 snow blower, a popular choice for both residential and commercial snow removal, offered reliable performance. While exact production years are difficult to pinpoint without further research, it likely emerged in the late 20th century. This gas-powered, two-stage snow thrower boasts a [find clearing width] inch clearing width, making it a capable machine for moderate to heavy snowfall.
The John Deere 338 snow blowerthrower was designed to provide efficient snow removal for homeowners and professionals alike. Its two-stage design made it suitable for handling various snow conditions. Specific production years are difficult to ascertain without further research, but it was a prominent model during its run. The engine powering the 338 was likely a [Find engine information, brand, HP/CC] gas engine. An electric start option [Find electric start option] further enhanced user convenience. The two-stage system utilizes an auger to break up and gather snow, then an impeller throws it away from the clearing path. The clearing width is [Find clearing width] inches, and the intake height is [Find intake height] inches, enabling it to handle deeper snowdrifts. While the exact throwing distance varies based on snow conditions, it's expected to throw snow up to [Find throwing distance, if available] feet. The drive system is likely a wheel-driven system with [Find number of speeds] forward and [Find number of speeds] reverse speeds, providing good maneuverability. Chute controls are typically manual, allowing operators to adjust the direction and distance of the snow stream. A headlight [Find headlight availability] provides added visibility in low-light conditions. It is ideal for use on driveways, walkways, and other paved surfaces, capable of handling moderate to heavy snowfall.
Specifications
| Engine | [Find Engine Brand] [Find HP or cc] [Find Electric Start Y/N] |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [Find Clearing Width] inches |
| Intake Height | [Find Intake Height] inches |
| Throwing Distance | Up to [Find Throwing Distance, if available] ft |
| Drive System | Wheel - [Find Speeds Forward/Reverse] |
| Fuel Tank | [Find Fuel Tank Capacity] gallons |
| Weight | [Find Weight] lbs |
| Years Produced | [Unknown - Research Needed] |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger and impeller for damage, wear, and proper alignment. Replace worn parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Snow blowers use shear pins to protect the auger and gearbox from damage. Regularly inspect shear pins and replace them immediately if broken to prevent costly repairs. Use only manufacturer-recommended shear pins.
- Fuel Stabilizer: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank. This prevents fuel from degrading and causing starting problems the following winter.
- Check Skid Shoes: Adjust skid shoes to protect the scraper bar and prevent damage to your driveway. Raise the skid shoes for gravel driveways and lower them for paved surfaces.
History & Background
The John Deere 338 was introduced to meet the demand for a mid-sized, reliable snow thrower. While specific details on redesigns are unavailable without further research, the 338 likely saw refinements throughout its production run to improve performance and user experience. It was a popular machine known for its solid construction and ability to handle a variety of snow conditions.
Frequently Asked Questions
What engine is in the John Deere 338?
The John Deere 338 typically uses a [Find engine brand] engine with approximately [Find HP or cc] horsepower/cc. It [Find electric start availability] offer an electric start option.
What is the clearing width of the 338?
The John Deere 338 has a clearing width of [Find clearing width] inches and an intake height of [Find intake height] inches.
Is the 338 a single-stage or two-stage snow blower?
The John Deere 338 is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller throws the snow through the chute.
What are common parts needed for the 338?
Common wear parts for the John Deere 338 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regularly inspecting and replacing these parts will help ensure the snow blower operates efficiently.
