John Deere 42040 Snow Blower Thrower Parts
42040 parts and accessories
The John Deere 42040 snow blower, a popular choice for homeowners during the late 20th and early 21st century, is known for its reliable gas-powered engine and efficient snow removal capabilities. Typically featuring a two-stage design with a clearing width around 20-24 inches, this model made quick work of residential driveways and walkways. Its ease of use and John Deere reputation solidified its place in the snow removal market.
The John Deere 42040 snow thrower was a staple in residential snow removal for a number of years, produced from the late 1990s into the early 2000s. While specific engine models may vary depending on the production year, it generally featured a Briggs & Stratton or Tecumseh gas engine, ranging from 5 to 7 horsepower. Some models offered an optional electric start for easier cold-weather starts. As a two-stage snow blower, the 42040 utilizes an auger to break up snow and then an impeller to throw it further away. The clearing width is typically around 21-24 inches, with an intake height of approximately 16-20 inches, allowing it to handle moderate snowfall. Expect a throwing distance of up to 30 feet, depending on the snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds for maneuverability. Chute controls are typically manual, allowing users to adjust the direction and angle of the snow discharge. While it didn't typically feature heated grips, it may have a headlight for improved visibility in low-light conditions. The 42040 is ideal for homeowners dealing with moderate snowfall on driveways and walkways. It is efficient on paved and moderately gravel surfaces.
Specifications
| Engine | Briggs & Stratton/Tecumseh 5-7 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21-24 inches |
| Intake Height | 16-20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | ~1.5 Gallons |
| Weight | ~150 Lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace any damaged parts to maintain optimal performance.
- Shear Pin Replacement: Keep extra shear pins on hand and replace them immediately if they break to prevent damage to the auger and gearbox.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor problems.
- Oil Changes: Change the engine oil at the recommended intervals (usually once a year) to ensure proper lubrication and engine longevity.
History & Background
The John Deere 42040 snow blower was introduced to provide homeowners with a reliable and affordable snow removal solution. It was one of John Deere's popular residential snow thrower models during its production run. While there weren't major redesigns, some minor improvements and component updates likely occurred throughout its production lifespan.
Frequently Asked Questions
What engine is in the John Deere 42040?
The John Deere 42040 typically features a Briggs & Stratton or Tecumseh gas engine, ranging from 5 to 7 horsepower. Some models offered an electric start option.
What is the clearing width of the 42040?
The clearing width of the John Deere 42040 snow blower is typically between 21 and 24 inches, with an intake height of approximately 16-20 inches.
Is the 42040 a single-stage or two-stage snow blower?
The John Deere 42040 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw it out of the chute.
What are common parts needed for the 42040?
Common wear parts for the John Deere 42040 include shear pins, belts (auger and drive), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters.
