John Deere 42033 Snow Blower Thrower Parts
42033 parts and accessories
The John Deere 42033 snow blower, designed for both residential and commercial use, offered a robust solution for winter snow removal. Although specific manufacturing dates are difficult to ascertain without more detailed model information, these machines typically featured a gas-powered engine, offering considerable power for medium to large driveways. Built as a two-stage snow thrower with a generous clearing width, the 42033 was popular for its reliable performance and ability to handle significant snowfalls.
The John Deere 42033 series of snow blowers were designed to provide efficient and effective snow removal. While precise production years are not readily available without sub-model identification, these models were likely produced in the late 1990s or early 2000s. Typically, they utilized a gas-powered engine, potentially a Briggs & Stratton or Tecumseh engine, with horsepower ratings in the 8-10 HP range. Some models may have offered an electric start option for easier starting in cold weather. The 42033 is generally a two-stage snow blower, featuring a robust auger system to break up snow and an impeller to throw it further. Expect a clearing width of around 26-30 inches, allowing for efficient clearing of driveways and walkways. The intake height would likely be around 20-22 inches. Throwing distance could reach up to 30-40 feet, depending on snow conditions. The drive system typically uses wheels with multiple forward and reverse speeds for enhanced maneuverability. Chute controls are generally manual, with a crank or lever to adjust the direction of the snow discharge. Depending on the specific configuration, some models may have included a headlight for improved visibility during nighttime operation. These snow blowers are best suited for medium to large-sized driveways and areas with moderate to heavy snowfall.
Specifications
| Engine | Gas Powered 8-10 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-30 inches |
| Intake Height | 20-22 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | ~1.5 gallons |
| Weight | ~200 lbs |
| Years Produced | Late 1990s - Early 2000s (estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal snow throwing performance.
- Check and Replace Shear Pins: Inspect the shear pins connecting the auger to the drive shaft before each use. Replace any broken or sheared pins to prevent damage to the auger and transmission. Use only the manufacturer-recommended shear pins.
- Proper Fuel Storage: Always add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and keeps the carburetor clean. Drain the fuel tank completely before long-term storage for best results.
History & Background
The John Deere 42033 snow blower series was a part of John Deere's commitment to providing durable and reliable snow removal equipment. It likely represented an evolution of previous models, incorporating design improvements to enhance performance and user experience. While not necessarily revolutionary, the 42033 series filled an important role in the John Deere lineup, offering a balance of power, functionality, and value for homeowners and light commercial users.
Frequently Asked Questions
What engine is in the John Deere 42033?
The John Deere 42033 typically features a gas-powered engine in the 8-10 HP range. Brands like Briggs & Stratton or Tecumseh were commonly used. Some models may have offered an electric start option.
What is the clearing width of the 42033?
The clearing width of the John Deere 42033 is approximately 26-30 inches, with an intake height of 20-22 inches.
Is the 42033 a single-stage or two-stage snow blower?
The John Deere 42033 is a two-stage snow blower. It utilizes an auger to gather and break up the snow, and then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 42033?
Common parts needed for the John Deere 42033 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regularly inspecting these parts and replacing them when necessary will help ensure optimal performance.
