John Deere 42010 Snow Blower Thrower Parts
42010 parts and accessories
The John Deere 42010 snow blower, popular from the late 1990s into the early 2000s, is a robust gas-powered machine known for its reliability in residential snow removal. Featuring a clearing width of 20 inches and a two-stage design, the 42010 efficiently chews through moderate to heavy snowfall. Homeowners appreciated its dependable engine and user-friendly controls, making it a go-to choice for tackling winter's worst.
The John Deere 42010 snow blower was a popular model produced from the late 1990s to the early 2000s. It's powered by a Tecumseh engine, delivering approximately 5 horsepower, providing ample power for most residential snow removal needs. Some models featured an optional electric start for easier starting in cold weather. The 42010 is a two-stage snow blower, employing an auger to break up the snow and an impeller to throw it away from the clearing path. Its 20-inch clearing width and 12-inch intake height allow it to handle moderate snowfalls with ease. The throwing distance can reach up to 25 feet, depending on the snow conditions. It utilizes a wheel drive system with multiple forward speeds and reverse. The chute rotation is manually controlled, allowing the operator to direct the snow discharge. While it doesn't have a headlight or heated grips, the 42010 is well-suited for homeowners dealing with moderate snowfalls on driveways and walkways. Its durable construction and relatively compact size made it a practical and reliable choice for many.
Specifications
| Engine | Tecumseh 5 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 20 inches |
| Intake Height | 12 inches |
| Throwing Distance | Up to 25 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 150 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect the auger and impeller regularly for damage or wear. Replace any worn or broken parts immediately to maintain optimal performance.
- Always use the correct shear pins for the auger. Using incorrect shear pins can damage the snow blower.
- Before each season, change the engine oil and lubricate all moving parts. Consider adding fuel stabilizer to the gas tank during off-season storage.
- Adjust the skid shoes to prevent damage to your driveway or other surfaces. Check and adjust belt tension regularly to ensure proper auger and impeller operation.
History & Background
The John Deere 42010 was introduced in the late 1990s as a mid-sized, two-stage snow blower aimed at homeowners. It offered a balance of power and maneuverability, filling a gap in John Deere's snow removal lineup. While there were no major redesigns during its production run, minor improvements were implemented over the years.
Frequently Asked Questions
What engine is in the John Deere 42010?
The John Deere 42010 is typically equipped with a Tecumseh engine, rated at approximately 5 horsepower. Some models offer an electric start option for added convenience.
What is the clearing width of the 42010?
The John Deere 42010 has a clearing width of 20 inches and an intake height of 12 inches.
Is the 42010 a single-stage or two-stage snow blower?
The John Deere 42010 is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 42010?
Common wear parts for the John Deere 42010 include shear pins (for the auger), drive belts, auger paddles, the scraper bar, skid shoes, spark plugs, and fuel filters.
