Gleaner L3 Combine Parts
Find parts for your Gleaner L3 Combine. We stock OEM and quality aftermarket replacements ready to ship.
The Gleaner L3 combine, produced from 1969 to 1978, was a popular choice for farmers due to its efficient conventional threshing system. Powered by a diesel engine producing approximately 165 horsepower, it offered ample power for its time. It could accommodate header widths up to 24 feet, making it a versatile machine for various grain harvesting operations.
About the L3
The Gleaner L3 combine was introduced in 1969 as a replacement for earlier Gleaner models and remained in production until 1978. It was equipped with an Allis-Chalmers 301 cubic inch, inline six-cylinder diesel engine producing around 165 horsepower. Threshing was accomplished via a conventional cylinder system, featuring a 42-inch wide cylinder and a large separation area that made it very good at harvesting wheat. The grain tank held approximately 170 bushels, and the unloading auger could empty it at a rate of around 50 bushels per minute. Header widths ranged from 13 to 24 feet. Chopper and spreader options were available to manage residue. The cab was designed with operator comfort in mind, offering a relatively quiet environment compared to older machines. The L3 was particularly well-suited for harvesting wheat, soybeans and corn.
L3 Specifications
| Engine | Allis-Chalmers 301 CID 165 HP Diesel |
|---|---|
| Separator Type | Conventional - 42-inch wide cylinder |
| Grain Tank | 170 bushels |
| Unloading Rate | 50 bu/min |
| Header Widths | 13-24 ft |
| Fuel Capacity | 60 gallons |
| Weight | 14,500 lbs |
| Years Produced | 1969-1978 |
L3 Maintenance Tips
- Concave Adjustment: Regularly check and adjust concave clearance according to the crop being harvested to optimize threshing efficiency and minimize grain damage.
- Belt and Chain Tension: Inspect all belts and chains for wear and proper tension. Loose or worn belts and chains can lead to reduced performance and premature failure.
- Sieve and Chaffer Cleaning: Clean sieves and chaffers frequently to prevent blockages and ensure clean grain samples. Use compressed air or brushes to remove debris.
- Bearing Greasing: Grease all bearings regularly as per the manufacturer's recommendations to maintain smooth operation and extend bearing life.
L3 History & Background
The Gleaner L3 was a key model in Gleaner's L series, representing a significant step forward in combine technology during the late 1960s. It maintained Gleaner's reputation for transverse flow and natural material flow that improved harvest efficiency. It helped to solidify Gleaner's position as a leader in the combine market.
Frequently Asked Questions
Which water pump fits the Gleaner L3 combine?
The recommended replacement water pump for the Gleaner L3 combine is the 74036573 - Pump, Water.
What replacement starter solenoid is recommended for the Gleaner L3?
For the Gleaner L3, a suitable replacement starter solenoid is the 70271857 - Solenoid, Starter (12 Volt).
Which straw chopper knife kit is compatible with the Gleaner L3 combine?
The 71310275 - Straw Chopper Knife Kit is designed for use with the Gleaner L3 combine's straw chopper.
What are common replacement parts for the Gleaner L3 combine?
For routine maintenance and wear, common replacement parts for the Gleaner L3 include the 71311275 - Belt, Pick-up Drum & Draper, 71131910 - Bearing, PTO Output Shaft, 71146965 - Finger Guide (Poly), 71174897 - Stationary Knife Kit, 71194972 - Bushing, Shoe, and the 71131901 - Sprocket, Cylinder Drive.

71348451 - Main Clutch Shaft
SKU: 71348451
10 in stock

71192723 - Engine Rear PTO Shaft
SKU: 71192723
8 in stock

71184195 - Wheel Brake Disc
SKU: 71184195
20 in stock

71154856 - Hydro Shaft For DynaPower Brand Hydro
SKU: 71154856
8 in stock

79034572 - Thresher Countershaft Belt
SKU: 79034572
5 in stock

79034570 - Pivot (RH) Belt
SKU: 79034570
Out of stock

71322828 - Flex Cutter Bar Belt
SKU: 71322828
20 in stock

71311275 - Pick-up Drum & Draper Belt
SKU: 71311275
163 in stock

71305994 - Floating Cutter Bar Belt
SKU: 71305994
32 in stock

71193749 - AC Compressor Belt
SKU: 71193749
41 in stock

FTR362-I - Bearing; 3 Bolt Triangular Flange Half
SKU: FTR362-I
753 in stock

72097583 - Bulb - 12V 21W (1156)
SKU: 72097583
115 in stock

621235M1 - Bulb - 12V 21W (1156)
SKU: 621235M1
115 in stock

71131910 - PTO Output Shaft Bearing
SKU: 71131910
89 in stock

W7761220 - Blower Switch
SKU: W7761220
423 in stock

72274512 - Expansion Valve (block type)
SKU: 72274512
83 in stock

71380935 - Blower Switch
SKU: 71380935
423 in stock

71369764 - Expansion Valve (block type)
SKU: 71369764
83 in stock

71336550 - York w/o Clutch (ER-210-L LH Suction Rotolock Head) New Compressor
SKU: 71336550
18 in stock

71307202 - Expansion Valve (block type)
SKU: 71307202
83 in stock

71195109 - Switch Blower
SKU: 71195109
423 in stock

71193543 - Receiver Drier
SKU: 71193543
41 in stock

71190643 - High Pressure Switch
SKU: 71190643
7 in stock

71188287 - CW rotation) 5/16" X 1 3/8" shaft Condenser Motor (12V
SKU: 71188287
21 in stock








