Case IH 826 Tractor Parts
Find parts for your Case IH 826 Tractor. We stock OEM and quality aftermarket replacements ready to ship.
The Case IH 826 tractor, manufactured from 1969 to 1971, was a popular choice for farmers needing a reliable utility tractor. Powered by a 77 horsepower engine, its robust design and ample PTO horsepower made it suitable for a variety of tasks. Farmers appreciated its straightforward operation and dependable performance in diverse agricultural applications.
About the 826
The Case IH 826 was introduced in 1969 and continued production through 1971. This model was known for its reliability and versatility in a wide range of farming operations. Under the hood, it featured an International Harvester C-291 6-cylinder diesel engine producing approximately 77 horsepower. The engine displaced 291 cubic inches. Transmission options included a gear-driven transmission with multiple speeds, providing good control for field work. The PTO delivered around 67 horsepower, available in 540 RPM configuration. Hydraulic capacity was sufficient for operating implements, providing adequate flow for implements and implements. It featured a Category II 3-point hitch, capable of handling a variety of implements. The Case IH 826 was commonly used in row crop operations, hay production, livestock farming, and light tillage work. It stood out for its balance of power, simplicity, and dependability within the Case IH lineup.
826 Specifications
| Engine | International Harvester C-291 77 HP Diesel |
|---|---|
| PTO HP | 67 HP @ 540 RPM |
| Transmission | Gear Drive, Multiple Speeds |
| Hydraulics | GPM varies based on configuration, up to 3 remotes |
| 3-Point Hitch | Category II, Lift Capacity approx. 3800 lbs |
| Fuel Capacity | 28 gallons |
| Weight | Approx. 7,500 lbs |
| Years Produced | 1969-1971 |
826 Maintenance Tips
- Engine Oil and Filter: Change the engine oil and filter every 125-250 hours, depending on operating conditions, using an oil that meets the specifications outlined in your operator's manual.
- Hydraulic System Maintenance: Regularly check hydraulic fluid levels and inspect for leaks. Change hydraulic filters according to the manufacturer's recommendations (typically every 500 hours) to prevent contamination and ensure proper hydraulic function.
- Fuel System Care: Use clean, high-quality fuel. Drain the fuel sediment bowl regularly to remove water and sediment. Consider using a fuel additive to prevent gelling in cold weather.
- Seasonal Storage: Before storing the tractor for an extended period, drain the fuel tank or add a fuel stabilizer to prevent fuel degradation. Disconnect the battery and store it in a cool, dry place. Grease all lubrication points and inspect tires for proper inflation.
826 History & Background
The Case IH 826 was introduced in 1969 as part of International Harvester's lineup of utility tractors. It represented a blend of power and simplicity, catering to the needs of diverse farming operations. While its production run was relatively short, the 826 remains a respected and sought-after tractor among collectors and farmers.
Frequently Asked Questions
Which PTO clutch disc kit fits the Case IH 826?
The recommended PTO clutch disc kit for the Case IH 826 is 68803C91 - PTO Clutch Disc Kit.
What starter solenoid is recommended for the Case IH 826?
For the Case IH 826, the 65478C1 - Starter Solenoid is a suitable replacement.
Which fuel strainer assembly fits the Case IH 826?
The 370832R91 - Strainer, Fuel Assembly is designed for the Case IH 826.
What are common replacement parts for the Case IH 826?
Common replacement parts for the Case IH 826 include the 384006R92 - Tie Rod, Inner, 77720C94 - Seal & Gasket Kit, WBKIH3 - Wheel Bearing Kit, 38B587 - Brake Disc Seal Kit, and the 108120R92 - Thermostat (180°).

SW756 - Cylinder Liner
SKU: SW756
5 in stock

SRK724 - Liner Sealing Ring Kit
SKU: SRK724
20 in stock

FF214J - Spin-On (QTY 1) Fuel Filter
SKU: FF214J
Out of stock

531851R1 - Front Axle Clamp Pin
SKU: 531851R1
Out of stock

39-5698 - Pivot Pin Retaining Pin
SKU: 39-5698
Out of stock

384006R1 - inner Ref 12 - Tie rod
SKU: 384006R1
499 in stock

383917R1 - Tube
SKU: 383917R1
238 in stock

374062R1 - Jam Nut
SKU: 374062R1
350 in stock

370689R21 - w/ Bushings Knee
SKU: 370689R21
59 in stock

359986R1 - Clamp
SKU: 359986R1
340 in stock

359984R1 - outer Ref 13 - Tie rod
SKU: 359984R1
415 in stock

251105R1 - Pivot Pin Retaining Pin
SKU: 251105R1
27 in stock

223313 - Complete Tie Rod Assembly
SKU: 223313
349 in stock

LM603049-I - Tapered Roller Bearing Cone
SKU: LM603049-I
336 in stock

LM603011-I - Tapered Bearing Cup
SKU: LM603011-I
94 in stock

LM48548-I - Tapered Roller Bearing Cone
SKU: LM48548-I
794 in stock

LM48510-I - Tapered Bearing Cup
SKU: LM48510-I
340 in stock

WL7610 - Trapezoid LED Light Assembly
SKU: WL7610
98 in stock

WL7606 - Flood LED Light Assembly
SKU: WL7606
92 in stock

WL3005 - Combo LED Sealed Beam
SKU: WL3005
58 in stock

WL2116 - 4 1/2" Diameter Trapezoid LED Sealed Beam
SKU: WL2116
341 in stock

WL1116 - 4 1/2" Diameter Flood LED Sealed Beam
SKU: WL1116
1157 in stock

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)
SKU: C5NN13N359E
96 in stock

A42294 - Sealed Beam Bulb (12 Volt)
SKU: A42294
340 in stock








