Case IH 606 Tractor Parts
Shop Case IH 606 Tractor parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The Case IH 606 tractor, manufactured from 1958 to 1963, was a reliable workhorse on American farms. Powered by an International Harvester C-264 engine producing around 61 horsepower (advertised), the 606 offered a solid 53 PTO horsepower. Farmers appreciated its durability and versatility for various field tasks, making it a popular choice for its time.
About the 606
The Case IH 606 was part of the '60' series of tractors introduced by International Harvester (later Case IH) in the late 1950s. It was produced from 1958 to 1963. The 606 was powered by an International Harvester C-264 engine, a 264 cubic inch (4.3 L) inline 4-cylinder engine that delivered approximately 61 advertised horsepower. These engines were available in both gasoline and diesel versions. The transmission was typically a gear-driven transmission offering 5 forward and 1 reverse speeds. The PTO (Power Take-Off) was rated at approximately 53 horsepower, available in a standard 540 RPM configuration. The hydraulic system provided a flow rate of around 11 GPM, powering two remote hydraulic valves. The 3-point hitch was a Category II, capable of lifting around 3,000 lbs. The 606 was often used for row crop work, hay baling, general livestock operations, and light tillage. Compared to other models in the lineup, like the smaller 504, the 606 offered more power and lifting capacity, making it suitable for larger farms or more demanding tasks.
606 Specifications
| Engine | International Harvester C-264 61 HP 264 ci Diesel/Gas |
|---|---|
| PTO HP | 53 HP @ 540 RPM |
| Transmission | Gear 5F/1R |
| Hydraulics | 11 GPM, 2 remotes |
| 3-Point Hitch | Category II, 3000 lbs lift |
| Fuel Capacity | 25 gallons |
| Weight | 5200 lbs |
| Years Produced | 1958-1963 |
606 Maintenance Tips
- Change engine oil and filter every 125-250 hours, using a high-quality oil designed for agricultural diesel or gasoline engines.
- Regularly inspect hydraulic fluid levels and check for leaks. Replace hydraulic filters per the manufacturer's recommendations to prevent contamination and maintain hydraulic system performance.
- Check and clean the fuel filter regularly, especially when using lower-quality fuel, to prevent fuel starvation and ensure optimal engine performance.
- Before storing the tractor for extended periods, drain the fuel tank, add a fuel stabilizer, and lubricate all grease fittings to prevent rust and corrosion.
606 History & Background
The Case IH 606 was introduced in 1958 as part of International Harvester's '60' series, designed to offer farmers increased power and efficiency. There were no major redesigns during its production run. The 606 represents a significant era in agricultural machinery, bridging the gap between older, less powerful tractors and the larger, more technologically advanced models that would follow.
Frequently Asked Questions
Which spark plug is suitable for the Case IH 606?
The 4012405C - Spark Plug is a suitable replacement for the Case IH 606 engine.
What PTO seal is recommended for the Case IH 606?
For the PTO on your Case IH 606, consider the 358812R91 - Seal, PTO Rear as a replacement part.
What fuel filter component is recommended for the Case IH 606?
For the fuel system on the Case IH 606, the 49923D - Screen, Fuel Filter is a recommended replacement part.
What replacement parts are frequently needed for the Case IH 606?
Common replacement parts for the Case IH 606 include the 374033R1 - Disc, Clutch Inner, NEW, 211-1028 - Ball, Brake Disc (Steel), 393229R1 - Cap, Radiator (7 lb.), 359984R93 - Tie Rod, Outer, and the 65478C1 - Starter Solenoid.

VTK229 - Valve Train Kit
SKU: VTK229
4 in stock

SK434 - Piston Liner Kit
SKU: SK434
4 in stock

SD706 - Cylinder Liner
SKU: SD706
7 in stock

SD482 - Cylinder Liner
SKU: SD482
18 in stock

SD372 - Cylinder Liner
SKU: SD372
10 in stock

382570R92 - Short Tie Rod
SKU: 382570R92
7 in stock

380317R92 - Tie Rod Assembly
SKU: 380317R92
6 in stock

379641R91 - w/ Bushings Knee
SKU: 379641R91
7 in stock

379551R92 - Short Tie Rod
SKU: 379551R92
20 in stock

379550R1 - Tie Rod Tube
SKU: 379550R1
4 in stock

375620R1 - Tie Rod Clamp
SKU: 375620R1
340 in stock

359984R1 - outer Ref 13 - Tie rod
SKU: 359984R1
415 in stock

M12649-I - Tapered Roller Bearing Cone
SKU: M12649-I
162 in stock

M12610-I - Tapered Bearing Cup
SKU: M12610-I
151 in stock

LM48548-I - Tapered Roller Bearing Cone
SKU: LM48548-I
794 in stock

LM48510-I - Tapered Bearing Cup
SKU: LM48510-I
340 in stock

WL7610 - Trapezoid LED Light Assembly
SKU: WL7610
98 in stock

WL7606 - Flood LED Light Assembly
SKU: WL7606
92 in stock

WL2116 - 4 1/2" Diameter Trapezoid LED Sealed Beam
SKU: WL2116
341 in stock

WL1116 - 4 1/2" Diameter Flood LED Sealed Beam
SKU: WL1116
1157 in stock

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)
SKU: C5NN13N359E
96 in stock

A42294 - Sealed Beam Bulb (12 Volt)
SKU: A42294
340 in stock

45640DB - Headlamp Assembly (6 Volt)
SKU: 45640DB
32 in stock

373662R1 - Sealed Beam Bulb (12 Volt)
SKU: 373662R1
246 in stock








