Case IH 444 Tractor Parts
Shop Case IH 444 Tractor parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The Case IH 444 tractor, manufactured from 1967 to 1971, was a popular choice for farmers needing a reliable utility tractor. Powered by a 37 horsepower gas engine, it delivered 33 PTO horsepower, making it well-suited for various agricultural tasks. Its compact size and dependable performance contributed to its widespread adoption in farming operations.
About the 444
The Case IH 444 tractor was introduced in 1967 and produced until 1971 as a versatile utility tractor. It featured an International Harvester C-153 4-cylinder gas engine producing approximately 37 horsepower. The engine displacement was 153 cubic inches. The 444 came equipped with a gear-type transmission offering 8 forward and 2 reverse speeds, providing a suitable range for different field conditions. The PTO delivered around 33 horsepower at 540 RPM. The hydraulic system had a capacity of around 6.5 GPM, powering the Category I 3-point hitch with a lift capacity of roughly 2,200 lbs. This tractor was commonly used for row crop work, hay baling, livestock feeding, and light tillage operations. The 444 distinguished itself within the Case IH lineup as a compact and economical option compared to larger, higher-horsepower models, appealing to smaller farms or those needing a secondary tractor for lighter tasks.
444 Specifications
| Engine | International Harvester C-153 37 HP Gas |
|---|---|
| PTO HP | 33 HP @ 540 RPM |
| Transmission | Gear 8F/2R |
| Hydraulics | 6.5 GPM, 0 remotes |
| 3-Point Hitch | Category I, 2200 lbs |
| Fuel Capacity | 13 gallons |
| Weight | 3200 lbs |
| Years Produced | 1967-1971 |
444 Maintenance Tips
- Engine Oil & Filter: Change the engine oil and filter every 125 hours of operation, using a high-quality oil meeting the manufacturer's specifications.
- Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic filter every 250 hours to prevent contamination and maintain optimal performance.
- Fuel System: Use fresh, clean fuel and consider adding a fuel stabilizer during seasonal storage to prevent fuel degradation and ensure easy starting.
- Seasonal Storage: Before storing the tractor for extended periods, drain the fuel tank, lubricate all grease fittings, and protect exposed metal parts with a rust inhibitor.
444 History & Background
The Case IH 444 was launched in 1967, representing a continuation of International Harvester's commitment to providing reliable and affordable utility tractors. While there were no major redesigns during its production run, it offered farmers a practical solution for various tasks. Its popularity underscored the demand for compact and dependable tractors in the agricultural sector.
Frequently Asked Questions
Which fuel filter is recommended for the Case IH 444?
For the Case IH 444, we recommend the 3044506R1 - Filter, Fuel.
What ignition key fits the Case IH 444?
The correct ignition key for the Case IH 444 is 20A829 - Key, Ignition.
Which thermostat should I use for the Case IH 444?
A suitable thermostat for the Case IH 444 is the 3042303R92 - THERMOSTAT-180.
What are the most commonly replaced parts for the Case IH 444?
For the Case IH 444, common replacement parts include the 4012405C - Spark Plug, 21A9R - Tune Up Kit, 710348R2 - Glow Plug, 393229R1 - Cap, Radiator (7 lb.), and the 211-1028 - Ball, Brake Disc (Steel).

SW758 - Cylinder Liner
SKU: SW758
16 in stock

SW757 - Cylinder Liner
SKU: SW757
5 in stock

SK476 - Piston Liner Kit
SKU: SK476
6 in stock

SK475 - Piston Liner Kit
SKU: SK475
Out of stock

399292R1 - Tie Rod
SKU: 399292R1
10 in stock

393228R11 - Tie Rod
SKU: 393228R11
45 in stock

379204R11 - Long (RH/LH) Tie Rod
SKU: 379204R11
24 in stock

356543R1 - Tie Rod Clamp
SKU: 356543R1
21 in stock

356541R91 - Tie Rod End
SKU: 356541R91
42 in stock

356540R91 - Short Tie Rod
SKU: 356540R91
72 in stock

3040920R91 - Short Tie Rod
SKU: 3040920R91
42 in stock

LM67048-I - Tapered Roller Bearing Cone
SKU: LM67048-I
457 in stock

LM67010-I - Tapered Bearing Cup
SKU: LM67010-I
1029 in stock

LM11949-I - Tapered Roller Bearing Cone
SKU: LM11949-I
286 in stock

LM11910-I - Tapered Bearing Cup
SKU: LM11910-I
330 in stock

WL7610 - Trapezoid LED Light Assembly
SKU: WL7610
98 in stock

WL7606 - Flood LED Light Assembly
SKU: WL7606
92 in stock

WL3005 - Combo LED Sealed Beam
SKU: WL3005
58 in stock

WL2116 - 4 1/2" Diameter Trapezoid LED Sealed Beam
SKU: WL2116
341 in stock

WL1116 - 4 1/2" Diameter Flood LED Sealed Beam
SKU: WL1116
1157 in stock

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)
SKU: C5NN13N359E
96 in stock

A42294 - Sealed Beam Bulb (12 Volt)
SKU: A42294
340 in stock

373662R1 - Sealed Beam Bulb (12 Volt)
SKU: 373662R1
246 in stock

371461R92 - Sealed Beam; Rear Work Lamp (12V) 4409X Floodlamp
SKU: 371461R92
200 in stock








