Case IH 1896 Tractor Parts
Shop Case IH 1896 Tractor parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The Case IH 1896 tractor, manufactured from 1972 to 1976, was a popular choice among farmers for its reliable performance and versatility. Powered by a robust 401 cubic inch diesel engine producing around 131 horsepower, the 1896 delivered ample power for various field operations. With a PTO horsepower of approximately 115, it efficiently handled implements, solidifying its reputation as a dependable workhorse in the agricultural landscape.
About the 1896
The Case IH 1896 was introduced in 1972 as part of the International Harvester lineup, continuing after the Case acquisition. Production ran until 1976, during which time the tractor gained a strong following due to its balance of power and reliability. The 1896 is powered by an International Harvester DT-402, a 401 cubic inch (6.6L) 6-cylinder diesel engine rated at approximately 131 horsepower. This engine provided sufficient power for demanding tasks like plowing and disking. The transmission is a gear-type transmission with options for either a 6-speed forward and 2-reverse gear configuration or a 12-speed forward and 4-reverse gear configuration. The PTO horsepower is around 115 HP, available in either 540 RPM or 1000 RPM options. Hydraulic capacity is approximately 16 GPM powering around 2-3 rear remotes. It features a Category II 3-point hitch, capable of lifting substantial implements. The 1896 was commonly used in row crop operations, hay production, livestock farming for tasks like baling and feeding, and various tillage applications. It distinguished itself from smaller models with its increased horsepower and heavier construction, providing greater capability for larger-scale farming operations. It stood out from larger models with its maneuverability.
1896 Specifications
| Engine | International Harvester DT-402 131 HP 401 ci Diesel |
|---|---|
| PTO HP | 115 HP @ 540/1000 RPM |
| Transmission | Gear Type, 6F/2R or 12F/4R speeds |
| Hydraulics | 16 GPM, 2-3 remotes |
| 3-Point Hitch | Category II, 5100 lbs lift capacity |
| Fuel Capacity | 47 gallons |
| Weight | 12,470 lbs |
| Years Produced | 1972-1976 |
1896 Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 250 hours of operation using a high-quality diesel engine oil that meets the manufacturer's specifications.
- Hydraulic System: Inspect hydraulic fluid levels regularly and change hydraulic filters every 500 hours or annually, whichever comes first, to prevent contamination and ensure optimal hydraulic performance. Check for leaks around cylinders and hoses.
- Fuel System: Use clean, high-quality diesel fuel and replace fuel filters every 300 hours to prevent fuel system issues. Consider adding a fuel stabilizer during seasonal storage to prevent fuel degradation.
1896 History & Background
The Case IH 1896 emerged as a key model in the early 1970s, representing a blend of power and versatility for farmers. It did not have any major redesigns during its production run. Its success solidified the 96-series reputation for rugged reliability in an era of rapidly advancing agricultural technology.
Frequently Asked Questions
Which fuel lift pump is suitable for the Case IH 1896?
The 87319987 - Pump, Fuel Lift is a direct replacement for the Case IH 1896.
What PTO clutch friction plate is recommended for the 1896?
The 1981228C1 - Plate, PTO Clutch Friction is a suitable replacement for the Case IH 1896 PTO.
Which engine oil filter fits the Case IH 1896?
For the Case IH 1896, the LF3349 - Filter, Lube, Full-Flow Spin-On is a recommended replacement.
What are essential replacement parts for routine maintenance on the Case IH 1896?
For routine maintenance on your Case IH 1896, consider replacing wear items like the A169970 - Belt, a A170241 - Cap, Radiator (16 lb.), and the A47038 - Seal Kit, Hydrostatic Steering Hand Pump. Other frequently replaced items include the 9706806 - Gas Strut, Cab Door (RH/LH), an 282775A1 - Switch, Ignition, and a WBKCA3 - Wheel Bearing Kit.

ZP0750125010 - Ball Joint
SKU: ZP0750125010
303 in stock

WBKCA3 - Wheel Bearing Kit
SKU: WBKCA3
57 in stock

N14377 - Cylinder End
SKU: N14377
303 in stock

F22580 - CASE-IH
SKU: F22580
114 in stock

B93222 - Wheel Bearing Kit
SKU: B93222
18 in stock

A52166 - MFWD Tie Rod
SKU: A52166
35 in stock

A160200 - Short Tie Rod End
SKU: A160200
23 in stock

A160199 - Long Tie Rod
SKU: A160199
9 in stock

A160166 - Tie Rod Tube
SKU: A160166
17 in stock

A149033 - Tie Rod Tube
SKU: A149033
33 in stock

A145857 - Tie Rod Wedge
SKU: A145857
27 in stock

A145846 - Spacer
SKU: A145846
167 in stock

A143876 - Tie Rod End (LH)
SKU: A143876
11 in stock

112204 - Tie Rod Assembly
SKU: 112204
2 in stock

112203 - Tie Rod Assembly
SKU: 112203
16 in stock

2852114 - Water Pump
SKU: 2852114
53 in stock

LM603049-I - Tapered Roller Bearing Cone
SKU: LM603049-I
336 in stock

LM603011-I - Tapered Bearing Cup
SKU: LM603011-I
94 in stock

WL1300 - Rectangle Hi / Low Flood / Spot Combo LED Work Lamp
SKU: WL1300
243 in stock

WL1295 - Rectangle Flood / Spot Combo LED Work Lamp
SKU: WL1295
Out of stock

D71346 - Bulb
SKU: D71346
497 in stock

87271837 - Flasher Control Switch
SKU: 87271837
390 in stock

529068 - Bulb
SKU: 529068
115 in stock

1156L24 - Replaces Bulb #1156 (2 Pack) 2400 Lumens LED Bulb
SKU: 1156L24
56 in stock








