Hay Equipment Parts Guide: Baler, Mower & Rake Replacement Parts
Hay season is demanding. This guide covers essential hay equipment parts for balers, mowers, and rakes, helping you keep your machinery running smoothly. Find the right replacement parts to minimize downtime and maximize productivity.
Introduction to Hay Equipment Parts
Hay season is critical for farmers and ranchers reliable hay equipment is essential for a successful harvest. From cutting and conditioning to baling and wrapping, each piece of machinery plays a vital role. This guide from Madison Tractor Company covers common hay equipment parts for balers, mowers rakes, helping you understand maintenance requirements and find the right replacements to minimize downtime.
Recommended Parts for This Guide
10 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
We carry a wide range of hay equipment parts for all major brands, including John Deere, Case IH, Ford, New Holland, Massey Ferguson, Kubota, Allis Chalmers, Deutz, International Harvester, Oliver, White, Gleaner, Vermeer, Hesston, Mahindra Zetor. Whether you need a new set of baler pickup teeth, a sickle section for your mower, or bearings for your rake, we can help.
Baler Parts: Round, Square & Everything In Between
Balers are complex machines with numerous moving parts that require regular maintenance and occasional repair. Understanding the key components of your baler is crucial for troubleshooting issues and ordering the correct replacement parts. We have dedicated guides for John Deere baler parts, New Holland baler partsCase IH baler parts.
Common Baler Part Categories
- Pickup Teeth These tines gather hay from the windrow and feed it into the baler. Bent or broken pickup teeth or their associated bushings should be replaced immediately to prevent hay loss and damage to other components. Consider the Baler Pickup Teeth: Tine Replacement & Spring Teeth guide for help.
- Belts Essential for round balers, round baler belts form the bale as hay is fed into the chamber. Worn or damaged belts can cause uneven bales and reduce baling efficiency. See our article on Round Baler Belts: Replacement Belts by Brand & Model for selection tips.
- Chains & Sprockets These components transfer power throughout the baler, driving various mechanisms. For the pickup system, you'll find parts like the pickup sprocket, pickup sprocket assemblies, clutch sprockets, pickup drive sprockets (including specific models like the 23-tooth pickup drive sprocket), pickup driven sprockets, pickup reel sprockets, and optional speed increase pickup sprockets. Don't forget associated components like the pickup drive bushing. Other crucial sprockets include mega wide drive sprockets. These, along with the feeding system and knotter, rely on regular lubrication and inspection to prevent wear and breakage.
- Knotter Parts The knotter is a critical component in square balers, responsible for tying the twine around the bale. Malfunctions can result in missed ties and loose bales. Refer to our Baler Knotter Parts: Bills, Discs & Twine Fingers guide for knotter troubleshooting. Common components include knotter bills, twine discs twine fingers.
- Twine & Net Wrap Choosing the right baler twine or round baler net wrap is crucial for bale integrity and storage. Consider factors like bale size, hay type storage conditions when selecting your materials.
- Bearings & Seals These components support rotating parts and prevent contamination. Inspect bearings regularly for wear and replace them as needed, including belt tensioner idler bearings.
- Hydraulic Cylinders Balers often use hydraulic cylinders to control functions like gate opening, bale density pickup height. Leaks or malfunctions can affect baler performance.
Troubleshooting Baler Issues
Before ordering parts, it's essential to accurately diagnose the problem. Here are some common baler issues and potential causes
- Missed Ties (Square Balers) Check the knotter for worn or broken parts, improper twine tension, or incorrect knotter timing.
- Uneven Bales (Round Balers) Inspect the belts for wear, damage, or improper tension. Also, check the feeding system for blockages or uneven distribution.
- Hay Loss Examine the pickup teeth for damage or missing tines. Also, check the seals around the baler chamber for leaks.
- Overheating Check the hydraulic fluid level and condition. Inspect the hydraulic pump for leaks or damage. Also, ensure adequate ventilation around the engine.
Safety Warning Always disconnect the power take-off (PTO) and shut off the engine before performing any maintenance or repairs on your baler.
Specific Baler Examples and Part Numbers
Let's look at some specific examples
- New Holland BR780 Round Baler Keep an eye on the bearings in the rollers, especially after heavy use. A common bearing is the 6206-2RS (6206-2RS-I at Madison Tractor) (cross-reference for various manufacturers).
- Case IH LB434 Square Baler Knotter problems are common. Ensure the knotter bills (Case IH part number 87703464) are sharp and properly adjusted.
Mower Parts: Keeping Your Cutter Sharp
Mowers are essential for cutting hay efficiently. Whether you have a disc mower, sickle mower, or rotary mower, maintaining the cutting components is crucial. Regular maintenance can significantly extend the life of your mower and reduce downtime.
Types of Mowers and Common Parts
- Disc Mowers These mowers use rotating discs with Blades to cut the hay. Common replacement parts include:
- Blades Worn or damaged blades reduce cutting efficiency and can damage the mower. Replace blades regularly, especially after hitting rocks or other obstructions.
- Gears Disc mowers use a series of gears to transmit power to the cutting discs. Inspect gears regularly for wear and damage.
- Bearings Bearings support the rotating discs and other moving parts. Replace bearings as needed to prevent excessive wear and damage.
- Skid Shoes These protect the cutter bar from ground contact. Replace when worn.
- Sickle Mowers Sickle mowers use a reciprocating blade to cut the hay. Common replacement parts include:
- Sickle Sections These are the individual blades that make up the sickle. Replace broken or damaged sections to maintain cutting efficiency.
- Guards Guards protect the sickle sections and prevent them from catching on the ground. Replace bent or damaged guards.
- Wear Plates Located between the sickle and the guard, wear plates minimize friction and protect the sickle bar.
- Drive Components Pitman arms, connecting rods wobble boxes transfer power to the sickle bar. Inspect these components regularly for wear and damage.
Mower Maintenance Tips
- Sharpen or Replace Blades/Sickle Sections Dull blades or sickle sections require more power to cut the hay, increasing fuel consumption and wear on the mower. Sharpen blades regularly or replace them when necessary.
- Lubricate Regularly Grease all grease fittings according to the manufacturer's recommendations. Regular lubrication helps prevent wear and extend the life of your mower.
- Inspect for Damage Before each use, inspect the mower for any signs of damage, such as bent blades, broken guards, or loose bolts. Repair or replace any damaged parts before operating the mower.
- Check Oil Levels For mowers with gearboxes, check the oil level regularly and add oil as needed.
Specific Mower Examples and Part Numbers
- New Holland 499 Haybine Inspect the belts that drive the conditioning rollers for cracks or wear. A common belt size is HB84.
- Kuhn GMD 800 Disc Mower Check the gearbox oil level regularly. Use SAE 80W-90 gear oil. Also, inspect the blades for sharpness and replace as needed.
Rake Parts: Gathering Hay Efficiently
Rakes are used to gather hay into windrows for baling. There are several types of rakes, including wheel rakes, rotary rakes parallel bar rakes. Proper maintenance of your rake ensures efficient hay gathering and reduces hay loss.
Types of Rakes and Common Parts
- Wheel Rakes These rakes use angled wheels to gather the hay. Common replacement parts include:
- Rake Wheels Replace damaged or bent rake wheels to maintain consistent hay gathering.
- Rake Teeth Replace missing or broken teeth to prevent hay loss.
- Bearings Bearings support the rotating wheels. Replace bearings as needed to prevent excessive wear and damage.
- Rotary Rakes Rotary rakes use rotating tines to gather the hay. Common replacement parts include:
- Tines Replace bent or broken tines to maintain efficient hay gathering.
- Tine Arms Tine arms support the tines. Replace damaged or bent tine arms.
- Gearbox Components Rotary rakes use gearboxes to transmit power to the rotating tines. Inspect gearbox components regularly for wear and damage.
Rake Maintenance Tips
- Inspect for Damage Before each use, inspect the rake for any signs of damage, such as bent wheels, broken tines, or loose bolts. Repair or replace any damaged parts before operating the rake.
- Lubricate Regularly Grease all grease fittings according to the manufacturer's recommendations. Regular lubrication helps prevent wear and extend the life of your rake.
- Adjust Rake Height Adjust the rake height to prevent the tines from digging into the ground.
Specific Rake Examples and Part Numbers
- John Deere 702 Rotary Rake Inspect the tines regularly and replace any that are bent or broken.
- New Holland 256 Rake Check the teeth on the rake wheels for wear and replace as needed. Also, ensure the wheels are properly aligned.
General Maintenance for All Hay Equipment
Regardless of the specific type of hay equipment you own, some general maintenance practices are essential for keeping your machinery running smoothly and reliably
- Regular Lubrication Grease all grease fittings regularly according to the manufacturer's recommendations. Use a high-quality grease designed for agricultural equipment.
- Fluid Checks Check the levels of all fluids, including engine oil, hydraulic fluid coolant, regularly and add fluids as needed.
- Filter Changes Change all filters, including air filters, fuel filters oil filters, according to the manufacturer's recommendations.
- Belt Inspection Inspect all belts for cracks, wear, or damage and replace them as needed.
- Tire Pressure Maintain proper tire pressure to ensure optimal performance and prevent premature tire wear.
- Storage When storing your hay equipment for extended periods, take steps to protect it from the elements. Clean the equipment thoroughly, lubricate all moving parts cover it with a tarp or store it in a shed.
By following these maintenance tips and addressing any issues promptly, you can keep your hay equipment running smoothly and reliably for years to come. Remember, proper maintenance is an investment that pays off in increased productivity and reduced downtime.
Shop Hay Equipment Parts at Madison Tractor Company
Madison Tractor Company is your one-stop shop for all your hay equipment parts needs. We offer a wide selection of high-quality replacement parts for all major brands, including John Deere, Case IH, Ford, New Holland more. Our knowledgeable staff is always available to answer your questions and help you find the right parts for your equipment. Browse our online catalog or contact us today to learn more! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.
Part of our comprehensive guide
Hay Equipment Parts Guide: Baler, Mower & Rake Replacement Parts

















