Case IH PUMA-145 Tractor Parts

PUMA 145 parts and accessories

The Case IH PUMA 145 tractor, manufactured from 2009 to 2014, quickly became a favorite on farms across the country. Powered by a robust 6.7L FPT diesel engine producing approximately 145 horsepower, and delivering around 120 PTO horsepower, this tractor offered a compelling blend of power and versatility. Farmers appreciated its comfortable cab and user-friendly controls for tackling various tasks.

The Case IH PUMA 145 tractor was introduced as part of the PUMA series, designed to offer mid-range horsepower with advanced features. Produced from 2009 to 2014, it filled a crucial niche in Case IH's lineup. The heart of the PUMA 145 is its 6.7-liter FPT (Fiat Powertrain Technologies) diesel engine, rated at approximately 145 engine horsepower. This engine provides ample power for a variety of tasks while adhering to emissions standards of its time. The tractor features a variety of transmission options, typically including a full powershift transmission with multiple speeds, providing smooth and efficient gear changes on the go. PTO horsepower is around 120, with both 540 and 1000 RPM PTO options available. The hydraulic system offers a flow rate of approximately 32 GPM, with multiple remote valves for implement control. It has a Category II or III 3-point hitch, depending on configuration, offering a lift capacity upwards of 7,000 lbs. The PUMA 145 found common application in row crop operations, hay production, livestock farms, and light tillage work. It distinguished itself from smaller Case IH tractors with its larger frame, more powerful engine, and advanced transmission options, while remaining more compact and agile than larger models in the MAGNUM series.

Specifications

Engine	FPT 6.7L 145 HP Diesel
PTO HP	120 HP @ 540/1000 RPM
Transmission	Full Powershift 18F/6R
Hydraulics	32 GPM, 3-4 remotes
3-Point Hitch	Category II/III, 7,275 lbs
Fuel Capacity	58 gallons
Weight	12,768 lbs
Years Produced	2009-2014

Maintenance Tips

Engine Oil & Filter: Change your engine oil and filter every 250-300 hours using the recommended oil type. Regularly check the oil level.
Hydraulic System: Inspect hydraulic oil levels and filter condition every 500 hours. Replace the hydraulic filter as needed, and address any leaks promptly to prevent contamination.
Fuel System: Use clean, high-quality diesel fuel and replace the fuel filter at the recommended interval (usually 500 hours). Drain water from the fuel/water separator regularly.
Seasonal Storage: Before storing the tractor for the off-season, fill the fuel tank to prevent condensation, add a fuel stabilizer, and ensure the battery is properly charged or disconnected.

History & Background

The Case IH PUMA 145 was launched in 2009 as a key member of the PUMA series, offering a balance of power and technology for mid-sized farming operations. While no major redesigns occurred during its production run, the PUMA 145 contributed to Case IH's reputation for producing reliable and versatile agricultural tractors.

Frequently Asked Questions

What engine is in the Case Ih PUMA 145?

The Case IH PUMA 145 is equipped with a 6.7-liter FPT (Fiat Powertrain Technologies) diesel engine. It produces approximately 145 horsepower.

What is the PTO horsepower on a PUMA 145?

The PTO horsepower on the Case IH PUMA 145 is approximately 120 HP. It offers both 540 and 1000 RPM PTO options.

What oil filter fits the PUMA 145?

The oil filter commonly used on the Case IH PUMA 145 is a Fleetguard LF9009 or a Case IH 84224218. Cross-references include Wix 57202 and Baldwin B7377.

What are common parts needed for the PUMA 145?

Common wear parts for the Case IH PUMA 145 include engine oil filters, fuel filters, air filters, hydraulic filters, belts (fan, alternator), hydraulic seals for remote valves and cylinders, steering components (tie rod ends), and clutch parts (if applicable).

Showing 1-24 of 136 products

Sort by: