Case IH 766 Tractor Parts
Browse Case IH 766 Tractor replacement parts. Everything from routine maintenance items to hard-to-find components.
The Case IH 766 tractor, manufactured from 1971 to 1976, became a favorite among farmers for its reliability and versatility. Powered by a robust International Harvester engine, it offered around 70 horsepower, making it suitable for a wide range of tasks. With a PTO horsepower of approximately 65, the 766 provided ample power for implements and became a workhorse on many farms.
About the 766
The Case IH 766 was introduced in 1971 as part of the '66 series, replacing earlier International Harvester models. It was produced until 1976. This tractor was designed to provide a balance of power and economy for mid-sized farms. The 766 was powered by an International Harvester engine, available as either a 291 cubic inch diesel or a 304 cubic inch gasoline engine, both rated at approximately 70 horsepower. The transmission was typically a gear-drive type, offering various speed options including a Torque Amplifier (TA) for on-the-go shifting. The PTO horsepower was rated around 65 hp, available at 540 RPM. The hydraulic system provided ample flow for implements, with a capacity of approximately 14 GPM and options for multiple remote valves. It featured a Category II 3-point hitch, capable of lifting around 3,500 lbs. Common farming applications included row crop cultivation, hay baling, livestock feeding, and light tillage. Compared to the smaller 666, the 766 offered more power and hydraulic capacity. It distinguished itself from the larger 866 by its more compact size and lower initial cost.
766 Specifications
| Engine | International Harvester 70 HP 291 ci Diesel / 304 ci Gas |
|---|---|
| PTO HP | 65 HP @ 540 RPM |
| Transmission | Gear Drive, Multiple Speed Options (including TA) |
| Hydraulics | 14 GPM, Up to 2 remotes |
| 3-Point Hitch | Category II, 3500 lbs lift capacity |
| Fuel Capacity | 25 gallons |
| Weight | 7,500 lbs |
| Years Produced | 1971-1976 |
766 Maintenance Tips
- Change engine oil and filter every 125-250 hours, depending on operating conditions, using a high-quality oil meeting manufacturer specifications.
- Regularly inspect hydraulic fluid levels and filters, changing the hydraulic fluid every 500-1000 hours to prevent contamination and maintain optimal performance.
- Check the fuel system for leaks and ensure proper fuel filtration. Drain any water accumulation from the fuel tank and filter regularly.
- Before seasonal storage, thoroughly clean the tractor, lubricate all grease points, and add fuel stabilizer to prevent fuel degradation. Consider storing indoors to protect against the elements.
766 History & Background
The Case IH 766 was launched in 1971 as part of the International Harvester '66 series, known for their improved operator comfort and enhanced features. While there weren't major redesigns during its production run, the 766 solidified International Harvester's reputation for building dependable and versatile tractors. It remains a significant model in agricultural history due to its widespread adoption and enduring popularity.
Frequently Asked Questions
What oil filter is recommended for the Case IH 766?
The LF3316 - Filter, Lube, Full-Flow Spin-On (QTY 12) is a suitable full-flow spin-on oil filter for the 766 model.
Is there a replacement dust boot for the PTO control on the Case IH 766?
Yes, the 393071R2 - BOOT, DUST; IND. PTO CTRL. / DIFF. LOCK is available for the PTO control on the 766.
Which fuel strainer assembly is recommended for the Case IH 766?
The 370832R91 - Strainer, Fuel Assembly is a suitable replacement for the 766 model.
What are some common replacement parts for the Case IH 766?
For the Case IH 766, common replacement and wear parts include the 69789C91 - Bearing, Release (sealed) and 524598R1 - Bearing, Pilot for the clutch, steering components like the 384006R92 - Tie Rod, Inner and 359984R93 - Tie Rod, Outer, a 38B587 - Brake Disc Seal Kit, and the 1500626C92 - Cap, Radiator w/ Cover (10 lb.).

VTK291 - Valve Train Kit
SKU: VTK291
2 in stock

SRK732 - Liner Sealing Ring Kit
SKU: SRK732
38 in stock

SK511 - Piston Liner Kit
SKU: SK511
63 in stock

SD602 - Cylinder Liner
SKU: SD602
7 in stock

ST2007A - BEARING
SKU: ST2007A
148 in stock

671806C1 - Tach Drive
SKU: 671806C1
65 in stock

531851R1 - Front Axle Clamp Pin
SKU: 531851R1
Out of stock

531260R92 - w/ Bushings Knee
SKU: 531260R92
91 in stock

39-5698 - Pivot Pin Retaining Pin
SKU: 39-5698
Out of stock

384006R1 - inner Ref 12 - Tie rod
SKU: 384006R1
499 in stock

383917R1 - Tube
SKU: 383917R1
238 in stock

374062R1 - Jam Nut
SKU: 374062R1
350 in stock

359986R1 - Clamp
SKU: 359986R1
340 in stock

359984R1 - outer Ref 13 - Tie rod
SKU: 359984R1
415 in stock

223313 - Complete Tie Rod Assembly
SKU: 223313
349 in stock

LM603049-I - Tapered Roller Bearing Cone
SKU: LM603049-I
336 in stock

LM603011-I - Tapered Bearing Cup
SKU: LM603011-I
94 in stock

LM48548-I - Tapered Roller Bearing Cone
SKU: LM48548-I
794 in stock

LM48510-I - Tapered Bearing Cup
SKU: LM48510-I
340 in stock

833083M1 - Needle Type
SKU: 833083M1
36 in stock

WL7610 - Trapezoid LED Light Assembly
SKU: WL7610
98 in stock

WL7606 - Flood LED Light Assembly
SKU: WL7606
92 in stock

WL3005 - Combo LED Sealed Beam
SKU: WL3005
58 in stock

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)
SKU: C5NN13N359E
96 in stock








