Case IH 4186 Tractor Parts
Shop Case IH 4186 Tractor parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The Case IH 4186 tractor, manufactured from 1976 to 1979, was a powerful workhorse for its time. It featured a 300 HP V8 diesel engine, delivering substantial power for heavy tillage and large-scale farming operations. Its robust design and high PTO horsepower made it a favorite among farmers seeking a dependable tractor for demanding tasks.
About the 4186
The Case IH 4186 was introduced in 1976 as part of International Harvester's (later Case IH) expansion into high-horsepower articulated tractors. Production continued through 1979. Powering this machine was a Cummins V-8 diesel engine, delivering approximately 300 horsepower and a displacement of 903 cubic inches. This engine provided ample torque for pulling heavy implements. The tractor utilized a robust 10-speed transmission, offering a wide range of speeds for various field conditions. The PTO delivered around 225 horsepower, available in 1000 RPM configuration for running large implements like forage harvesters and grain carts. Hydraulic capacity was significant for the time, supporting multiple remote valves for controlling implements. The 3-point hitch was a Category III, capable of lifting heavy loads. Farmers commonly used the 4186 for primary tillage operations like plowing and disking, as well as for large-scale planting and harvesting. Its size and power distinguished it from smaller tractors in the Case IH lineup, catering to the needs of larger farming operations.
4186 Specifications
| Engine | Cummins V-903 300 HP Diesel |
|---|---|
| PTO HP | 225 HP @ 1000 RPM |
| Transmission | Gear 10-speed |
| Hydraulics | 30 GPM, 3 remotes |
| 3-Point Hitch | Category III, 7,000 lbs lift capacity |
| Fuel Capacity | 150 gallons |
| Weight | 25,000 lbs |
| Years Produced | 1976-1979 |
4186 Maintenance Tips
- Engine Oil & Filter: Change the engine oil and filter every 250 hours of operation using a high-quality diesel engine oil and the correct filter.
- Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic fluid and filter every 500 hours, or as recommended by the manufacturer, to prevent contamination and maintain optimal performance.
- Fuel System: Use clean, high-quality diesel fuel and replace the fuel filter every 250 hours to prevent fuel system issues. Drain water from the fuel/water separator regularly.
- Seasonal Storage: Before storing the tractor for the off-season, drain the fuel tank, add fuel stabilizer, and run the engine briefly to distribute the stabilizer throughout the fuel system to prevent fuel degradation.
4186 History & Background
The Case IH 4186 was launched in the mid-1970s, representing a significant step in high-horsepower articulated tractors. While not undergoing major redesigns during its production run, it established a reputation for reliability and power. It demonstrated IH's commitment to serving the needs of large-scale agricultural operations.
Frequently Asked Questions
Which water pump is compatible with the Case IH 4186?
The 673162C93 - Pump, Water is a suitable replacement for the 4186 model. Another option is the 673162C1 - WATER PUMP.
What PTO clutch components fit the Case IH 4186?
For the PTO system, the 68803C91 - PTO Clutch Disc Kit is a complete solution. Individual components like the 381490R1 - Disc, PTO and 381489R3 - Plate, PTO are also available.
What oil filter fits the 4186?
A recommended oil filter for the Case IH 4186 is the LF3316 - Filter, Lube, Full-Flow Spin-On. This full-flow spin-on filter provides essential engine lubrication.
What are common replacement parts for the Case IH 4186?
Regularly needed replacement parts for the 4186 include the FF5019 - Filter, Fuel, Spin-On, 223313 - Complete Tie Rod Assembly, 358812R91 - Seal, PTO Rear, WF2071 - Filter, Water, Spin-On, 245258A1 - Switch Blower, and the 524598R1 - Bearing, Pilot. Consistent maintenance ensures optimal performance.

VTK241 - Valve Train Kit
SKU: VTK241
7 in stock

SW462 - Cylinder Liner
SKU: SW462
15 in stock

390686R1 - Jam Nut
SKU: 390686R1
295 in stock

384006R1 - inner Ref 12 - Tie rod
SKU: 384006R1
499 in stock

383917R1 - Tube
SKU: 383917R1
238 in stock

359984R1 - outer Ref 13 - Tie rod
SKU: 359984R1
415 in stock

223313 - Complete Tie Rod Assembly
SKU: 223313
349 in stock

WL7610 - Trapezoid LED Light Assembly
SKU: WL7610
98 in stock

WL7606 - Flood LED Light Assembly
SKU: WL7606
92 in stock

WL2116 - 4 1/2" Diameter Trapezoid LED Sealed Beam
SKU: WL2116
341 in stock

WL1116 - 4 1/2" Diameter Flood LED Sealed Beam
SKU: WL1116
1157 in stock

C5NN13N359E - Warning Lamp / Turn Signal (12 Volt)
SKU: C5NN13N359E
96 in stock

A42294 - Sealed Beam Bulb (12 Volt)
SKU: A42294
340 in stock

87271837 - Flasher Control Switch
SKU: 87271837
390 in stock

373662R1 - Sealed Beam Bulb (12 Volt)
SKU: 373662R1
246 in stock

130609 - AMBER FL LIGHT
SKU: 130609
96 in stock

OK505 - Major Engine Overhaul Kit
SKU: OK505
Out of stock

IK505 - In Frame Engine Overhaul Kit
SKU: IK505
Out of stock

529901R91 - Hydraulic Control Valve Actuator
SKU: 529901R91
41 in stock

70227C91 - Bearing
SKU: 70227C91
42 in stock

68803C91 - Consist Of: PTO Clutch Disc Kit
SKU: 68803C91
38 in stock

68802C91 - Consist Of: PTO Clutch Disc Kit
SKU: 68802C91
66 in stock

67761C1 - PTO Front Brg. Retainer Seal
SKU: 67761C1
484 in stock

393071R2 - DUST; IND. PTO CTRL. / DIFF. LOCK BOOT
SKU: 393071R2
482 in stock








